14-21 Infiniti QX60 CURT 4-flat Plug and Play Trailer WiringCURTOriginal price was $138.90. Current price is $118.76.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2022 - 2024 Infiniti QX60
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Battery-Powered | Yes |
| Electrical Component Location | Vehicle / Trailer |
| Electrical Package Type | Packaged |
| Material | THERMOPLASTIC RUBBER |
| Mount Type Description | Not Applicable |
| Side Application Type Description | Not Applicable |
| T-Connector Location | S3,S5 |
| 29 | Pin |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494One-Year Limited
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2022 - 2024 | Infiniti QX60 | — |
Yes, the 22-24 Infiniti QX60 CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1495) is designed to fit the 2022-2024 Infiniti QX60.
The 22-24 Infiniti QX60 CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1495) fits 2022-2024 Infiniti QX60 models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
The 22-24 Infiniti QX60 CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1495) fits the following vehicles: 2022-2024 Infiniti QX60. Always verify your specific year, make, and model before ordering.
The 22-24 Infiniti QX60 CURT 4-flat Plug and Play Trailer Wiring (Part #CTW1495) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Part number 56520 is designed for SUVs and Vans (S). The manual shows a representative vehicle but does not list specific makes, models, or model years. Consult the product fitment database or contact Curt Manufacturing to confirm compatibility with your specific vehicle.
The kit includes a harness with a blue relay, a 4-flat connector, cable ties for securing wires, and a 4-flat dust cover. The manual does not provide a complete itemized parts list, so verify all components are present before beginning installation.
Yes. Step 1 requires you to disconnect the negative battery terminal before beginning installation. Fasten this wire down and away from the battery during the installation process.
You will need a panel trim removal tool and a 10mm socket. The manual rates installation difficulty as 'Easy' and notes that proper tools will improve installation quality and reduce time required.
Yes. Step 2 requires you to open the rear hatch, lay the rear seats down, and remove the floor board to gain access to the storage area where the harness will be routed.
The white housing is located on the sidewall of the cargo area. Install the harness with the blue relay in this housing and secure it with a zip tie to prevent rattling or noise caused by vibration.
The 4-flat connector mounts near the receiver tube, accessed from under the passenger side or center of the rear bumper. Locate the housing with a dust cover plug, remove the plug, insert the connector, and secure excess wire with cable ties to keep it out of the way.
1. Disconnect the negative battery terminal. 2. Open the rear hatch and remove the floor board. 3. Use a panel trim removal tool to loosen push fasteners on the back-trim flap, threshold trim, and cargo bin. 4. Use a 10mm socket to loosen three screws and remove the cargo bin. 5. Remove the cargo hold-down and loosen sidewall trim. 6. Install the harness with blue relay in the white housing on the sidewall and secure with a zip tie. 7. Install the 4-flat connector near the receiver tube under the rear bumper and secure with cable ties. 8. Test the harness and reconnect the battery.
Use zip ties to secure the harness with the blue relay in the white housing on the sidewall, and use cable ties to secure excess wire near the 4-flat connector to keep it out of the way and prevent vibration noise.
A 10mm socket is required. Step 4 specifies using a 10mm socket to loosen the three screws in the bottom of the cargo bin. The manual does not provide a specific torque value for these screws.
A 10mm socket is required to remove the cargo hold-down on the driver side during Step 5 of the installation.
Do not lay tools across the positive battery terminal (typically noted with red covers or a red '+' symbol). This can cause a ground short, resulting in sparks and/or electrical shocks.
Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower. Exceeding either rating may cause unsafe operation or damage.
After reconnecting the negative battery terminal, test the harness using a test light, 4-flat tester, or a functioning trailer to verify proper operation.
Reinstall all items removed during installation, including the floor board, rear seats, cargo bin, cargo hold-down, and all trim pieces. Install the provided 4-flat dust cover to help prevent corrosion.
Perform periodic inspection of all wires and connections to ensure there is no visible damage or loose connections. The manual does not specify an inspection interval.
Using a panel trim removal tool, loosen and remove: the push fasteners covering the back-trim flap of the rear seat, the threshold trim between the hatch and cargo bin, the push fasteners securing the cargo bin, the trim cover of the cargo hold-down on the driver side, and the push fasteners on the sidewall trim on the driver side.
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 2 items:
$446.04$611.65
No reviews have been added for this product.
