B&W 10K 5" Drop 5.5" Rise ( 1-7/8" , 2-5/16" Balls) Adjustable Ball Mount Hitch For 2" Recievers TS10048BB&W Trailer Hitches$279.00In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2024 Chevrolet Blazer EV
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2024 | Chevrolet Blazer EV | — |
The 24 - 24 Chevrolet Blazer EV 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA267 (Part #HWA267) fits the following vehicles: 2024 Chevrolet Blazer EV. Always verify your specific year, make, and model before ordering.
Yes, the 24 - 24 Chevrolet Blazer EV 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA267 (Part #HWA267) is designed to fit the 2024 Chevrolet Blazer EV.
The 24 - 24 Chevrolet Blazer EV 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA267 (Part #HWA267) fits 2024 Chevrolet Blazer EV models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
The 24 - 24 Chevrolet Blazer EV 2in. CURT Trailer Hitch + Ball Mount + Cover + Lock Kit HWA267 (Part #HWA267) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The CURT 13589 has a gross trailer weight (GTW) capacity of 3,500 lbs. and a tongue weight (TW) capacity of 350 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
The manual does not specify which vehicle makes, models, years, cab styles or bed lengths the 13589 is designed for. Contact CURT product support at 877.287.8634 or visit curtmfg.com to confirm fitment for your specific vehicle.
Required tools are: ratchet, 7mm socket, 3/4" socket, socket extension (3"), torque wrench, die grinder, and rotary tool. For a complete tools reference guide, visit curtmfg.com/trailer-hitch-installation.
The kit includes: 1 trailer hitch, 4 carriage bolts (1/2" - 13 x 1.75"), 4 serrated-flange nuts (1/2"-13), 4 spacers (0.25" x 1.00" x 2.50"), and 4 fishwires (1/2").
The manual requires bumper fascia trimming but does not explicitly state whether the bumper must be fully removed. The installation involves raising the hitch into position behind the bumper cover. Contact CURT support at 877.287.8634 for clarification on your specific vehicle.
You must remove the underbody panel by using a 7mm socket to remove sixteen screws and two push pins (Step 1). After installation, the panel is trimmed and reinstalled (Steps 3 and 5).
The manual states that hole enlargement is required. Step 2 specifies enlarging the access hole using a die grinder or rotary tool. The vehicle frame already has mounting holes; you enlarge the access hole to guide the fishwire and bolts through.
Bumper fascia and underbody panel trimming is required. Step 3 specifies trim dimensions: 3-1/2" on two sides, 2-1/2" on one side, and 2-5/8" on another, with a trim diagram provided for reference. Use the diagram to mark and trim both the underbody panel and bumper cover.
All mounting hardware must be torqued to 90 ft-lbs. This is done in Step 5 after the hitch is positioned and loosely secured with the serrated-flange nuts.
The fishwire is a guide tool that helps you thread the carriage bolts and spacers through the vehicle frame without losing them inside the frame rail. Insert the coiled end through the mounting hole and out the access hole, pass it through the spacer, thread the bolt into the coil, kink the wire to keep the spacer separate, then pull the fishwire, spacer and bolt back through the frame and out the mounting hole. Leave the fishwire attached until Step 4 when you raise the hitch into position.
1. Remove the underbody panel (16 screws with 7mm socket, 2 push pins). 2. Enlarge the access hole and insert fishwires with carriage bolts and spacers into the mounting holes, leaving fishwire attached. 3. Trim the underbody panel and bumper cover using the trim diagrams. 4. Raise the hitch into position behind the bumper cover, remove fishwires, and loosely secure with serrated-flange nuts. 5. Torque all hardware to 90 ft-lbs. and reinstall the underbody panel.
Safety glasses must be worn at all times during installation. Never exceed your vehicle manufacturer's recommended towing capacity. Proper tools will improve installation quality and reduce time required.
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure. This helps prevent damage to the product or vehicle.
The manual states that periodic inspection should be performed to ensure all mounting hardware remains tight and structural components are secure, but does not specify an inspection interval. Contact CURT support at 877.287.8634 for recommended maintenance intervals.
The manual does not specify vehicle applications. Contact CURT at 877.287.8634 or visit curtmfg.com to confirm fitment for your make, model and year.
You need a ratchet, 7mm socket, 3/4" socket, 3" socket extension, torque wrench, die grinder, and rotary tool. See curtmfg.com/trailer-hitch-installation for a complete tools reference guide.
Yes. Hole enlargement is required using a die grinder or rotary tool. Bumper fascia and underbody panel trimming is also required; trim dimensions are provided in Step 3.
Torque all mounting hardware to 90 ft-lbs.
Gross trailer weight capacity is 3,500 lbs. and tongue weight capacity is 350 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Remove the underbody panel using a 7mm socket to remove 16 screws and 2 push pins. After installation, trim and reinstall the panel.
On Sale Today
Original price was $436.80. Current price is $338.99.You save $97.81 (22%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sun, Sep 20
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 3 items:
$792.79$1,033.60
No reviews have been added for this product.