Lippert

• Tandem axle air-ride suspension system with shock absorption
• Reduces braking distance compared to torsion axle setups
• Includes all mounting hardware for DIY installation
• Dampens road vibrations more effectively than torsion axles
• Protects RV interior and cargo from impact damage

Lippert

Lippert Center Point Air-Ride RV Suspension System - Tandem Axle Configuration 1565391

Lippert

LIPPERT Gooseneck Connect 21K

• Replacement controller for Lippert Level-Up leveling systems
• Includes flat mounting brackets and installation hardware
• Wired controller design, not compatible with Ground Control
• One-year manufacturer warranty included
• Quick installation without additional tools required

Lippert

Lippert OneControl® Level Up® Advantage Leveling Controller

Lippert

Lippert OneControl Hotspot® Prepped RV Wi-Fi Kit

• 1/2" stud size, fits 14.5–16.5" wheels
• Hub only, full assembly not included
• Solid iron construction, 1-year warranty
• Genuine Lippert replacement part

Lippert

Lippert Idler Hub, 6 on 5.5"; 1/2" Stud - 3,500 lbs. 144603

• Axle capacity range: 2,200–8,000 lbs
• Center hanger location, 4-1/2" length × 3-1/8" width
• To-hole distance: 3-5/16", hole size: 7/8"
• Universal application, compatible with competitor axles
• Genuine Lippert replacement part

Lippert

Lippert Center Trailer Axle Hanger - 4-1/2" x 3-1/8", 2,200-8,000-lb. Axle Rating 127782

• 2,200 lbs axle rating, fits 8-12 inch wheels
• 5.5 inch hub flange, fully assembled and pre-greased
• Bearing cones and seals pre-installed, ready to mount
• Includes 1-year warranty on genuine Lippert part

Lippert

Lippert Idler Hub Assembly, 5 on 4.5"; 5.5" Hub Flange - 2,200 lbs. (Fully Assembled) 814198

• 3" spring width, 48-1/2" axle spacing
• Supports tandem or triple axle configurations
• 10-3/4" width, 10-1/4" height
• Universal application, compatible with competitor axles
• Blank finish, zero installation time required

Lippert

Lippert Tandem / Triple Trailer Axle Equalizer - 3" Spring Width, 48-1/2" Axle Spacing 299017

• Supports 12,000–16,000 lb axle capacity
• 7-1/2" length, 3-1/8" width, 1" hole
• Welded-mount design for chassis attachment
• Front axle hanger location, 6-1/4" on-center spacing
• Universal application, compatible with competitor axles

Lippert

Lippert Front Trailer Axle Hanger - 7-1/2" x 3-1/8", 12,000-16,000-lb. Axle Rating 298462

• Supports 12,000-16,000 lb axle capacity
• 5-5/8" length, 3-7/8" width, 1-1/8" hole
• Welded center hanger for axle mounting
• 4-1/8" on-center hole spacing
• Universal fit with competitor axles

Lippert

Lippert Center Trailer Axle Hanger - 5-5/8" x 3-7/8", 12,000-16,000-lb. Axle Rating 298458

• 1.75 inch tube diameter with U-bolt design
• Direct replacement for RV trailer axle systems
• Available in three sizes: 1.75", 2.375", 3"
• Consult original hardware specifications before purchasing
• Blank finish coating

Lippert

Lippert Axle Mounting Kit - 1.75" Tube 297426

• Supports axle capacity 12,000-16,000 lbs
• Includes outer bearing, races, inner bearing, grease seal
• Universal application compatible with competitor axles
• Blank finish
• Includes cotter pin

Lippert

Lippert Trailer Outer Wheel Bearing Cup - 12,000-16,000-lb. 293381

• 9/16-18 thread, 6-5/8" length, 3" tube diameter
• 7,000-lb. rated capacity
• Yellow zinc-plated steel resists rust and corrosion
• Fine threads for superior holding strength
• Nuts sold separately

Lippert

Lippert Trailer Axle U-Bolt for 3" Tube - 6-5/8" Long, 7,000-lb. 9/16"-18 Thread End 2139541

Lippert

Lippert Wheel End Oil Seal - 12,000-16,000-lb. Axles, 3.125" ID (2-Pack) 2023134020

• Fits 10,000-lb axle capacity trailers
• 2.875 inch spindle diameter, 3.875 inch hub bore
• 1/2 inch width oil or grease seal
• Universal fit, compatible with competitor axles
• Pack of 2 replacement seals

Lippert

Lippert Wheel End Oil Seal - 10,000-lb. Axles, 2.875" ID (2-Pack) 2023134019