Our in-house experts typically reply within one business day.
ARIES
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
On Sale Today
Original price was $366.95. Current price is $208.00.You save $158.95 (43%)
Free Shipping
Ships free on all orders
Authorized DealerIncludes one pair of side bars and mounting hardware
Warranty: Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
Finish: SEMI-GLOSS BLACK POWDER COAT
Material: Blank
Color: Black
Side Component Type: Board and Bracket
ARIES 3" side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3" nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3" round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3" nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Ram 1500, 2500 or 3500 and Dodge Ram 1500, 2500 or 3500 (see application info to verify fitment). ARIES 3" round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of t he tubes for a more comfortable step.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
3 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2009 - 2010 | Dodge Ram 1500 | Extended Cab Pickup · 4-Door | — |
| 2011 - 2018 | Ram 1500 | Extended Cab Pickup · 4-Door | — |
| 2019 - 2024 | Ram 1500 Classic | Extended Cab Pickup · 4-Door | — |
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Mon, Aug 31 - Wed, Sep 2
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Yes, the ARIES 205040 3-Inch Round Black Steel Nerf Bars, No-Drill, Fits Select Dodge, Ram 1500, 2500, 3500 (Part #BBDR205040) is designed to fit the 2009-2010 Dodge Ram 1500.
The ARIES 205040 3-Inch Round Black Steel Nerf Bars, No-Drill, Fits Select Dodge, Ram 1500, 2500, 3500 (Part #BBDR205040) fits 2009-2010 Dodge Ram 1500 models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
The ARIES 205040 3-Inch Round Black Steel Nerf Bars, No-Drill, Fits Select Dodge, Ram 1500, 2500, 3500 (Part #BBDR205040) fits the following vehicles: 2009-2010 Dodge Ram 1500; 2011-2018 Ram 1500; 2019-2024 Ram 1500 Classic. Always verify your specific year, make, and model before ordering.
The ARIES 205040 3-Inch Round Black Steel Nerf Bars, No-Drill, Fits Select Dodge, Ram 1500, 2500, 3500 (Part #BBDR205040) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes two side bars (driver and passenger), four mounting brackets (two front, two rear), and all required fasteners: M8, M10, and M12 bolts; flat washers, lock washers, and hex nuts in those sizes; bolt plates; and plastic retainers. A complete parts list is provided on page 1 of the manual.
Yes. The 205040 is designed for 2015 and newer vehicles with factory threaded inserts. The installation procedure for these vehicles is described in Step 3A. Vehicles without factory inserts (2015 and older) require a different fastening procedure outlined in Step 3B.
Yes. Vehicles without factory threaded inserts (2015 and older models) can be fitted with the 205040 using the alternative fastening procedure in Step 3B. This procedure uses M10 nut plates and M10 hex bolts to secure the bracket to the rocker panel instead of relying on factory inserts.
You will need a torque wrench, 13mm socket, 16mm socket, 18mm socket, utility knife, and a level. The torque wrench is essential for securing fasteners to the correct specifications, and the level is used to adjust and level the side bars during installation.
Yes. The manual states: "Before you begin installation, read all instructions thoroughly." This will help you understand the full process, identify which procedure applies to your vehicle (with or without factory inserts), and ensure proper installation.
Step 6 recommends tightening all brackets to the vehicle first, followed by the side bar connections. This sequence helps ensure proper alignment and secure mounting.
No. During initial installation, you should snug the hardware but not fully tighten it. This is stated in Step 3A for the front bracket and Step 5 for the side bar connections. Full tightening occurs after adjustment and leveling are complete.
M8 bolts should be torqued to 7 ft.-lbs. This specification applies to all M8 fasteners used in the installation unless otherwise noted in the manual.
M12 bolts have two torque specifications depending on application: 16 ft.-lbs. or 28 ft.-lbs. The manual does not specify which fasteners use which value, so refer to the torque specifications table on page 2 and consult the manufacturer if clarification is needed.
For 2015 and newer vehicles with factory inserts: (1) Insert an M8 bolt plate into the hole closest to the front. (2) Insert an M12 bolt and nut plate into the remaining hole. (3) Slide plastic bolt retainers over both bolts. (4) Place the front mounting bracket and secure the left side with an M12 flat washer, lock washer, and hex nut on the M12 bolt, plus two M8 hex bolts with flat and lock washers on the bottom. (5) Secure the right side with an M8 flat washer, lock washer, and hex nut. Snug but do not fully tighten.
For 2015 and older vehicles without factory inserts: (1) Insert an M8 bolt plate and M12 bolt/M10 nut plate as described in Step 3A. (2) Align the M10 nut with one of the bottom holes in the rocker panel. (3) Secure with an M10 hex bolt, lock washer, and nut. The M10 nut plate is used instead of relying on factory threaded inserts.
Insert an M12 bolt/M10 nut plate into the slot in the rocker panel and secure with a plastic retainer. Place the rear bracket in position. Secure the top with a flat washer, lock washer, and nut on the M12 stud. For the bottom: on 2015 and newer models, use one M8 hex bolt, lock washer, and flat washer; on 2015 and older models, rotate the bolt plate to position the nut behind the lower mounting position and secure with an M10 hex bolt, flat washer, and lock washer.
Place the side bar onto the brackets and align the mounting holes. Attach using two M10 hex bolts, two M10 lock washers, and two M10 flat washers. Snug the hardware but do not fully tighten until after adjustment and leveling are complete.
Insert an M12 bolt/M10 nut plate into the body panel and an M8 bolt plate into the remaining top slot on the rocker panel. Slide plastic bolt retainers over both bolts. Place the bracket and secure the top front location with an M8 flat washer, lock washer, and nut. Secure the top rear location with an M12 flat washer, lock washer, and nut. For the bottom: on 2015 and newer models, use one M8 hex bolt, lock washer, and flat washer; on 2015 and older models, rotate the bolt plate and secure with an M10 hex bolt, flat washer, and lock washer.
Wax the product after installation and regularly thereafter to add a protective layer. Do not use polish or wax containing abrasives. For polished, gloss, or smooth finishes, polish may be used to clear small scratches. Clean with mild automotive detergent only; do not use dish detergent, abrasive cleaners, abrasive pads, or wire brushes. Perform periodic inspections to ensure all mounting hardware remains tight.
Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes, or any polish or wax containing abrasives. These products can damage the finish. Use only mild automotive detergent for cleaning.
Periodic inspections should be performed to ensure all mounting hardware remains tight. The manual does not specify the inspection interval, so consult the manufacturer for recommended inspection frequency.
The 205040 fits 2015 and newer vehicles with factory threaded inserts and 2015 and older vehicles without factory inserts. The manual does not list specific vehicle makes or models. Contact ARIES Automotive at 877.287.8634 or visit ARIESAUTOMOTIVE.COM to confirm fitment for your vehicle.
The manual does not mention drilling. Installation uses existing mounting locations on the vehicle and bolt plates inserted into rocker panel slots and body panel holes.
Torque M8 bolts to 7 ft.-lbs.
Wax the product after installation and regularly thereafter. Clean with mild automotive detergent only. Do not use abrasive cleaners, wire brushes, or abrasive waxes. Perform periodic inspections to ensure all hardware remains tight.
No reviews have been added for this product.
