Our in-house experts typically reply within one business day.
ARIES
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes one pair of side bars and mounting hardware
Finish: SEMI-GLOSS BLACK POWDER COAT
Material: Stainless Steel
Side Component Type: Board and Bracket
ARIES 3" round side bars are a reliable and budget-friendly option for side steps on your truck. This set of nerf bars offers solid rust resistance, a custom fit and a no-drill installation. Constructed from stainless steel, these 3" side bars are perfect for work or play, easi ly withstanding dirt, water, mud, sand, snow and road salt and maintaining dependable corrosion resistance even offroad. They also come with a durable semi-gloss black powder coat finish that greater enhances rust resistance, and helps keep the nerf bars looking clean in spite of minor scuffs and scratches. 3" diameter, heavy-wall tubing is used to construct the steps, providing excellent strength and rigidity for safe, comfortable entry and exit. These 3" round nerf bars also feature non-skid step pads to further enhance safety. The step pads are textured to increase traction, and they are custom-placed to match the door layout for a convenient step up right where you need it. To ensure the best fit and appearance on your truck, every set of 3" side bars is made vehicle-specific. This means the steps are bent to a specific contour to complement the shape of the vehicle's rocker panels. It also makes for a much easier installation compared to any universal nerf bars or running boards. These particular 3" nerf bars are designed to fit specific years of the Chevy Colorado and GMC Canyon (see application info to verify fitment). ARIES side bars use heavy-duty, vehicle-specific brackets that mount using pre-existing factory holes to completely eliminate drilling from the installation process. This speeds up the install and helps avoid unnecessary modification to your vehicle. It also promotes a stronger, more rigid step for sure footing every time you climb into your truck.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Refer to Warranty PDF
2 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2015 - 2026 | Chevrolet Colorado | Crew Cab Pickup · 4-Door | — |
| 2015 - 2026 | GMC Canyon | Crew Cab Pickup · 4-Door | — |
The ARIES 3" Round Black Stainless Side Bars, Select Chevrolet Colorado, GMC Canyon Step Nerf Bar Kit (Part #BBDR214051) fits 2015-2026 Chevrolet Colorado models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the ARIES 3" Round Black Stainless Side Bars, Select Chevrolet Colorado, GMC Canyon Step Nerf Bar Kit (Part #BBDR214051) is designed to fit the 2015-2026 Chevrolet Colorado.
The ARIES 3" Round Black Stainless Side Bars, Select Chevrolet Colorado, GMC Canyon Step Nerf Bar Kit (Part #BBDR214051) fits the following vehicles: 2015-2026 Chevrolet Colorado; 2015-2026 GMC Canyon. Always verify your specific year, make, and model before ordering.
The ARIES 3" Round Black Stainless Side Bars, Select Chevrolet Colorado, GMC Canyon Step Nerf Bar Kit (Part #BBDR214051) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes 2 sidebars (1 driver/left side, 1 passenger/right side), 6 universal mounting brackets, 12 clip-on nuts (M8), 24 hex bolts (M8 × 25mm), 24 flat washers (M8 × 24mm × 2mm), and 24 lock washers (M8).
You will need a ratchet, socket set, and level. The manual rates the installation difficulty as Easy.
Yes, assistance is recommended during installation.
The manual does not mention battery disconnection. No electrical work is involved in this installation.
Start installation on the passenger side. The manual instructs you to install the passenger/right sidebar first, then repeat the same steps for the driver/left sidebar.
Three mounting brackets are used per sidebar. The manual specifies that mounting brackets bolt to the 1st, 2nd, and 4th factory running board mounting locations on each side.
Yes. All 6 mounting brackets are universal and will fit on either the left or right side of the vehicle.
Remove the rubber plugs as necessary to access the mounting locations. The manual shows this in Figure 2.
Select one M8 clip nut and slide it into the large hole and over the smaller hole next to it. Line up the threaded nut on the clip nut with the smaller hole in the body panel. Two clip nuts are used per mounting bracket.
No. After bolting the mounting brackets to the clip nuts, snug but do not fully tighten the hardware. Wait until after the sidebar is positioned and leveled before final tightening.
Carefully position the sidebar onto the mounting brackets. Do not slide the sidebar front to back or rotate it on the brackets, as this may damage the finish on the sidebar.
Six M8 × 25mm hex bolts attach each sidebar to the three mounting brackets (two bolts per bracket).
The level is used to ensure the sidebar is properly aligned and positioned before final tightening of all hardware.
M8 bolts should be torqued to 7 ft-lbs. This applies to all M8 hex bolts, clip nuts, and fasteners used in the 214051 installation unless otherwise noted.
M8 × 25mm hex bolts are used. Six bolts are required per sidebar, along with six M8 lock washers and six M8 flat washers.
The manual does not mention drilling. Installation uses existing factory running board mounting locations on the vehicle.
Wax the product after installation. Regular waxing is recommended to add a protective layer over the finish. Do periodic inspections to ensure all hardware remains secure and tight.
Use mild automotive detergent or mild soap to clean the sidebars. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes, or similar products that may damage the finish.
Do not use any type of polish or wax that may contain abrasives, as these could damage the finish. For stainless steel sidebars, aluminum polish may be used to polish small scratches and scuffs. For gloss black finishes, only mild soap should be used for cleaning.
After installation, level and adjust the sidebar, then tighten all hardware. Perform periodic inspections to ensure all hardware remains secure and tight.
The 214051 is a universal product designed for vehicles with factory running board mounting locations. Verify fitment with the manufacturer at 877-287-8634 before purchasing.
You will need a ratchet, socket set, and level. Assistance is recommended during installation.
No. The 214051 uses existing factory running board mounting locations. No drilling is required.
M8 bolts are torqued to 7 ft-lbs. All hardware should be snug but not fully tightened until the sidebar is leveled and positioned.
Wax the product after installation and regularly thereafter. Use only mild automotive detergent or mild soap for cleaning. Do not use abrasive cleaners, polishes with abrasives, or wire brushes.
Level the sidebars, tighten all hardware to 7 ft-lbs for M8 bolts, and perform periodic inspections to ensure all fasteners remain secure.
On Sale Today
Original price was $408.95. Current price is $232.00.You save $176.95 (43%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Sat, Aug 29 - Mon, Aug 31
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
