Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2007 - 2012 Nissan Sentra
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45520, installation hardware, pin & clip
Trailer ball sold separately
Includes ball mount #45520, installation hardware, pin & clip
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Flat
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Nissan Sentra (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you?re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2007 - 2012 | Nissan Sentra | Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
The CURT 113703 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Nissan Sentra (Part #BKDK113703) fits the following vehicles: 2007-2012 Nissan Sentra. Always verify your specific year, make, and model before ordering.
Yes, the CURT 113703 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Nissan Sentra (Part #BKDK113703) is designed to fit the 2007-2012 Nissan Sentra.
The CURT 113703 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Nissan Sentra (Part #BKDK113703) fits 2007-2012 Nissan Sentra models. The 2012 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 113703 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Nissan Sentra (Part #BKDK113703) Drilling is required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, Curt part number 11370 is designed for the Nissan Sentra 2.0. This is a receiver hitch rated for 2,000 lbs. trailer weight and 200 lbs. tongue weight. Do not exceed your vehicle manufacturer's recommended towing capacity.
Curt 11370 is designed for use with ball mount D-20 / 45520, or Euro ball mounts 45561 (1 7/8" ball) or 45562 (2" ball). Verify your ball mount part number before purchase to ensure compatibility.
The Curt 11370 is rated for 2,000 lbs. trailer weight and 200 lbs. tongue weight. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower.
The kit includes: 2× 1/2-13 x 1 1/2" carriage bolts, 2× 7/16-14 x 1" carriage bolts, 2× CM-SP7 square hole spacers (0.250 x 1.00 x 2.00"), 2× 7/16-14 hex flange nuts, 2× HFN 1213 hex flange nuts (1/2-13), 2× 7/16" fishwire, and 1× 11370-TPS trunk pan spacer (0.250").
Yes, spare tire removal is required. Step 1 of the installation requires you to remove the spare tire from the trunk and remove rubber plugs. The spare tire is reinstalled in step 7 after the hitch is secured.
Yes, drilling is required. Step 3 requires you to enlarge two holes in the bumper beam that line up with the outer two holes in the hitch plate. The exact size of the enlargement is not specified in the manual; contact Curt Technical Support at 1-800-798-0813 for specific hole dimensions.
Yes, fishwiring is required. Step 4 requires you to fishwire (thread) 2× 7/16" carriage bolts with CM-SP7 spacers from the end of the bumper beam through the enlarged holes. Fishwiring is a technique for routing fasteners through existing or enlarged holes without removing the component.
Torque all 7/16" hardware to 70 ft.-lb. and all 1/2" hardware to 110 ft.-lb. This applies to both the carriage bolts and their corresponding flange nuts. Tighten fasteners in step 6 after the hitch is finger-tightened in position.
1. Remove spare tire and rubber plugs from trunk. 2. Install trunk pan spacer (11370-TPS) with 2× 1/2" carriage bolts. 3. Enlarge two holes in bumper beam that align with outer two holes in hitch plate. 4. Fishwire 2× 7/16" carriage bolts with CM-SP7 spacers from bumper beam end to enlarged holes. 5. Raise hitch into position and finger-tighten with 2× 1/2" and 2× 7/16" flange nuts. 6. Torque all 7/16" hardware to 70 ft.-lb. and 1/2" hardware to 110 ft.-lb. 7. Return spare tire to trunk.
Non-trailer loads may be applied to this hitch, but they must be supported by auxiliary stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. Always use appropriate load-securing equipment.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. Regular inspection helps maintain the integrity and safety of the installation.
Yes, Curt 11370 is designed for Nissan Sentra 2.0. Rated for 2,000 lbs. trailer weight and 200 lbs. tongue weight. Compatible with ball mounts D-20 / 45520, 45561 (1 7/8"), or 45562 (2").
Yes, drilling is required. You must enlarge two holes in the bumper beam to align with the outer two holes in the hitch plate. Fishwiring of fasteners through these holes is also required.
The kit includes 2× 1/2-13 x 1 1/2" carriage bolts, 2× 7/16-14 x 1" carriage bolts, 2× CM-SP7 spacers, 2× 7/16-14 hex flange nuts, 2× HFN 1213 hex flange nuts, 2× 7/16" fishwire, and 1× 11370-TPS trunk pan spacer.
Torque all 7/16" hardware to 70 ft.-lb. and all 1/2" hardware to 110 ft.-lb. Tighten after finger-tightening the hitch in position.
Yes, the spare tire must be removed from the trunk before installation and reinstalled after the hitch is secured.
Rated for 2,000 lbs. trailer weight and 200 lbs. tongue weight, but do not exceed your vehicle manufacturer's recommended towing capacity.
On Sale Today
Original price was $355.95. Current price is $240.99.You save $114.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Thu, Aug 20 - Sat, Aug 22
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$391.57$506.53
No reviews have been added for this product.