Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2015 Ford Mustang
Confirmed to Fit
2019 - 2023 Ford Mustang
Confirmed to Fit
2015 - 2018 Ford Mustang
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45521, installation hardware, pin & clip
Trailer ball sold separately
Includes ball mount #45521, installation hardware, pin & clip
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 200 LB / 2,000 LB
Weight Carrying Capacity (Pounds): 2,000 LB
WC Tongue Weight (Pounds): 200 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Ford Mustang (see application info to verify fitment). The hitch integrates with the vehicle's frame and provides a useful and dependable 1-1/4" x 1-1/4" receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4" trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you're headed or which season of the year you?re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94943 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2015 | Ford Mustang | Convertible · 2-Door | No Drilling Required Installation Time: 30-60 minutes Visibility: Exposed |
| 2019 - 2023 | Ford Mustang | Coupe | No Drilling Required Installation Time: 30-60 minutes Excluding active exhaust or quad tip exhaust Visibility: Exposed |
| 2015 - 2018 | Ford Mustang | Coupe | No Drilling Required Installation Time: 30-60 minutes Visibility: Exposed |
The CURT 114053 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Ford Mustang (Part #BKDK114053) fits the following vehicles: 2015-2023 Ford Mustang. Always verify your specific year, make, and model before ordering.
Yes, the CURT 114053 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Ford Mustang (Part #BKDK114053) is designed to fit the 2015-2023 Ford Mustang.
The CURT 114053 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Ford Mustang (Part #BKDK114053) fits 2015-2023 Ford Mustang models. The 2023 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 114053 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Ford Mustang (Part #BKDK114053) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT part number 11405 is designed for the 2015 Ford Mustang Coupe. This is a weight-carrying hitch with a maximum trailer weight capacity of 2,000 lbs and tongue weight capacity of 200 lbs.
The CURT 11405 is rated for a maximum trailer weight of 2,000 lbs and tongue weight of 200 lbs when used as a weight-carrying hitch. You must never exceed your vehicle manufacturer's recommended towing capacity.
The CURT 11405 is designed for use with ball mount #45521. Euro ball mount options are also available: #45571 (1 7/8" ball) and #45572 (2" ball).
Required tools are: pry bar, ratchet, 11/16" socket, 13mm socket, torque wrench, 6" socket extension, and safety glasses. A torque wrench is essential because all 7/16" hardware must be torqued to 70 lb-ft.
No, drilling is not required. The CURT 11405 uses existing holes in the frame rails and the fishwire hardware installation method.
Two people may be required to ease installation. The manual recommends reading all instructions thoroughly before beginning and notes that using proper tools will greatly improve the quality of the install and reduce the time required.
The fishwire technique involves threading 7/16" fishwires with carriage bolts and spacers through access holes in the frame rails before raising the hitch into position. Once the hitch is raised, the fishwires are used to pull the bolts through the mounting holes in the hitch frame brackets and frame rails, where they are then secured with hex flange nuts.
Yes. Step 1 requires lowering the exhaust by removing 6 M8 bolts from the hanger brackets using a 13mm socket. After the hitch is installed and torqued, the exhaust is raised back into position and the hanger brackets are re-installed in step 5.
All 7/16" hardware must be torqued to 70 lb-ft. This includes the 8 carriage bolts and 8 hex flange nuts that secure the hitch to the frame rails.
The CURT 11405 includes: 8 pieces of 7/16" fishwire, 8 carriage bolts (7/16"-14 x 1 1/4", Grade 8), 8 hex flange nuts (7/16"-14), and 8 square hole spacers (0.250 x 0.88 x 2.25", part number CM-SP2).
All non-trailer loads (wheel-less loads) applied to the CURT 11405 must be supported by 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. CURT recommends the use of 18050 stabilizing straps for all non-trailer loads.
Safety glasses should be worn at all times while installing the CURT 11405.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain the integrity and safety of the installation.
The CURT 11405 is rated as a moderate difficulty installation. The manual estimates a professional installation time of 60 minutes and a novice (DIY) installation time of 30 minutes.
Yes, the CURT 11405 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
CURT Manufacturing warrants the 11405 to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty. CURT's liability is limited to repair or replacement of defective products and excludes liability for incidental or consequential loss or damage.
Yes. The CURT 11405 is designed for 2015 Ford Mustang Coupe with 2,000 lbs trailer weight and 200 lbs tongue weight capacity.
No. The CURT 11405 requires no drilling. It uses existing frame holes and fishwire hardware installation.
Yes. Remove 6 M8 bolts from exhaust hanger brackets with a 13mm socket, then re-install after the hitch is torqued.
All 7/16" hardware must be torqued to 70 lb-ft.
2,000 lbs trailer weight and 200 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes. All non-trailer loads must be supported by CURT 18050 stabilizing straps. Failure to do so voids the warranty.
Total for 5 items:
$502.56$676.52
On Sale Today
Original price was $527.95. Current price is $353.99.You save $173.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Mon, Aug 10 - Wed, Aug 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.