Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2015 - 2024 Ford Edge
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45521, installation hardware, pin & clip
Trailer ball sold separately
Includes ball mount #45521, installation hardware, pin & clip
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 1-1/4 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 350 LB / 3,500 LB
Weight Carrying Capacity (Pounds): 3,500 LB
WC Tongue Weight (Pounds): 350 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Ford Edge (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2015 - 2024 | Ford Edge | No Drilling Required Installation Time: 30-60 minutes Undercar Trimming: required Visibility: Exposed |
The CURT 121403 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Ford Edge (Part #BKDK121403) fits the following vehicles: 2015-2024 Ford Edge. Always verify your specific year, make, and model before ordering.
Yes, the CURT 121403 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Ford Edge (Part #BKDK121403) is designed to fit the 2015-2024 Ford Edge.
The CURT 121403 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Ford Edge (Part #BKDK121403) fits 2015-2024 Ford Edge models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 121403 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Ford Edge (Part #BKDK121403) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, part number 12140 is designed for 2015-present Ford Edge SUVs. Verify your vehicle matches this year range and model before purchase.
The hitch is rated for 3,500 lbs trailer weight and 350 lbs tongue weight as a weight-carrying hitch. Never exceed your vehicle manufacturer's recommended towing capacity.
Required tools: 7/32" socket, 3/4" socket, 10mm socket, T20 Torx bit (Sport model only), ratchet, torque wrench, aviation shears, and safety glasses. A 5.5mm socket is also needed for Sport models to remove exhaust bezels.
No, drilling is not required. The hitch uses existing frame holes for mounting.
All 1/2" fasteners must be torqued to 110 lb-ft.
Two people may be required to ease installation, though the manual does not state this is mandatory.
All non-trailer loads must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads voids the product warranty.
Yes, the CURT 12140 is designed for 2015-present Ford Edge SUVs. Confirm your vehicle is a Ford Edge within this model year range before purchasing.
Yes, the CURT 12140 is compatible with Ford Edge Sport models. Sport models require additional steps to remove exhaust bezels using a 5.5mm socket and T20 Torx bit during installation.
The CURT 12140 is designed for use with ball mount #45521. Euro mount options are available: #45571 (1 7/8" ball) and #45572 (2" ball).
The kit includes: (4) CM-SP4 spacers (.250 x 1.50 x 3.00" square hole), (4) carriage bolts (1/2-13 x 1 1/2, Grade 8), (4) hex flange nuts (HFN 1213, Grade 8), and (4) 1/2" fishwires.
Yes, you must support and lower the exhaust by removing (2) rubber isolators mounted to the muffler before installation. The exhaust is raised back into position and the isolators reinstalled after the hitch is mounted.
Remove the (2) panels from behind the rear wheels by removing (2) hex nuts using a 10mm socket and (2) screws with a 7/32" socket. These panels are set aside and reinstalled after the hitch is mounted.
Yes, trimming is required. Trim 3/8" off the center underbody panel outer tabs to allow easier mounting of the hitch. The removed underbody side panels must also be trimmed as shown in the diagram to allow for reinstallation. The washer/nut may require trimming of the washer for reinstallation.
Fishwiring is a technique using the supplied 1/2" fishwires to thread spacers and carriage bolts into the frame mounting holes before the hitch is raised into position. The fishwires guide the fasteners through the holes, then are removed and replaced with hex flange nuts once the hitch is positioned.
Thread (2) CM-SP4 spacers and (2) 1/2" carriage bolts into the mounting holes using the fishwires for both frame rails. Then raise the hitch over the exhaust, thread the fishwires into the mounting holes, raise the hitch into position, remove the fishwires, and install the (4) supplied 1/2" hex flange nuts.
The hitch side plates are located between the center underbody panel tabs and the frame rails.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This maintenance is critical for safe operation.
Safety glasses must be worn at all times while installing this product.
Professional installation time is approximately 60 minutes. Novice (DIY) installation time is approximately 120 minutes.
The hitch requires the exhaust to be lowered during installation by removing rubber isolators from the muffler. The exhaust is then raised back into position after the hitch is mounted. No permanent modification to the exhaust is required.
On vehicles equipped with a hands-free lift gate, perform the kick motion on the left or right side of the receiver tube after installation.
Yes, the underbody panels are reinstalled using the hardware (hex nuts and screws) removed in step 1. However, the washer/nut may require trimming of the washer for reinstallation.
CURT Manufacturing warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If defective, CURT may repair or replace the product at their option when returned prepaid with proof of purchase. Alteration, misuse, or improper installation voids the warranty.
The CURT 12140 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Call CURT Technical Support at 800.798.0813. If you are hesitant to undertake installation on your own, contact an authorized CURT installer for additional assistance.
On Sale Today
Original price was $407.95. Current price is $274.99.You save $132.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 5 items:
$425.57$558.53
No reviews have been added for this product.