CURT 117683 Class 1 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda CR-VCURT$266.11Out of Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2017 - 2026 Honda CR-V
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Installation requires some fascia trimming and temporary lowering of exhaust
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45521, installation hardware, pin & clip (trailer ball sold separately)
Includes ball mount #45521, installation hardware, pin & clip (trailer ball sold separately)
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 1-1/4 IN
Color: Black
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 350 LB / 3,500 LB
Weight Carrying Capacity (Pounds): 3,500 LB
WC Tongue Weight (Pounds): 350 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Honda CR-V (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 - 2026 | Honda CR-V | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed Bumper fascia trimming required Undercar trimming (not fascia) required interferes with rear kick sensor |
The CURT 121693 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda CR-V (Part #BKDK121693) fits 2017-2026 Honda CR-V models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT 121693 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda CR-V (Part #BKDK121693) is designed to fit the 2017-2026 Honda CR-V.
The CURT 121693 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda CR-V (Part #BKDK121693) fits the following vehicles: 2017-2026 Honda CR-V. Always verify your specific year, make, and model before ordering.
The CURT 121693 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda CR-V (Part #BKDK121693) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT part number 12169 is designed for 2017-Present Honda CR-V SUVs. Verify your vehicle year and model match before purchasing.
The hitch is rated for a maximum of 3,500 lbs trailer weight and 350 lbs tongue weight when used as a weight-carrying hitch. You must never exceed your vehicle manufacturer's recommended towing capacity.
The hitch is designed for use with CURT ball mount #45521. Euro mount options are available: #45571 (1 7/8" ball) and #45572 (2" ball).
Required tools are: ratchet, 11/16" and 3/4" sockets, 6" socket extension, torque wrench, masking tape, aviation shears, Phillips head screwdriver, pry bar, electrical tape, and safety glasses.
Yes. You must lower the exhaust by removing 3 rubber isolators from the exhaust towards the rear of the vehicle before beginning installation. After installation is complete, you raise the exhaust by reversing this step.
Yes. You must trim the lower fascia and sensor bracket (if present) as shown in the trim diagrams provided in the manual. The manual includes separate diagrams for lower fascia trim and sensor bracket trim.
This step applies only to hands-free liftgate enabled vehicles. Remove 2 screws and 1 push pin holding the sensor to the lower bumper fascia using a Phillips head screwdriver and pry tool. Remove the forward-most sensor antenna (if present), cover it in the provided corrugated plastic tubing, and push it through the hole in the Main Body Plate. Adjust as needed and use electrical tape to adhere the antenna ends to the tubing. Reinstall the sensor after final torquing.
Fishwire is used to guide the carriage bolts and spacers through the vehicle access holes to the attachment holes on each side of the frame rail. You thread 2 fishwires with 2 carriage bolts (7/16-14 x 1 1/4) and 2 CM-SP2 spacers through the vehicle access holes, then use the fishwires to pull the hardware through to the frame attachment points.
Raise the hitch into position while feeding the fishwires through the holes in the hitch. Once the hitch is in place, remove the fishwires and loosely secure 2 7/16" hex flange nuts on each side. Do not fully tighten until the final torque step.
Torque all 7/16" hardware to 59 ft-lbs and all 1/2" hardware to 110 ft-lbs. This includes the carriage bolts, hex flange nuts, and the tow loop plate attachment.
Secure the Tow Loop Plate to the recovery loop using 1 carriage bolt (1/2"-13 x 2"), 1 CM-SP32 spacer, and 1 hex flange nut (1/2"-13 Grade 8). Torque the 1/2" hardware to 110 ft-lbs.
The kit includes: 4 carriage bolts (7/16-14 x 1 1/4), 4 hex flange nuts (7/16-14), 4 CM-SP2 spacers (0.250 x 0.88 x 2.25" square hole), 4 pieces of 7/16" fishwire, 1 carriage bolt (1/2"-13 x 2"), 1 CM-SP32 spacer (0.188 x 1.50 x 2.00" round hole), 1 hex flange nut (1/2"-13 Grade 8), and 1 piece of 3/8" nylon slit wire loom (part 12209-04563).
Safety glasses must be worn at all times during installation. Read all instructions thoroughly before beginning. If you are hesitant to undertake this task, contact an authorized CURT installer for assistance. Call CURT Technical Support at 800-798-0813 if you have questions.
Two people may be required to ease installation. Using proper tools will greatly improve the quality of the install and reduce the time required.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This should be done regularly throughout the life of the hitch.
The hitch complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Yes, the CURT 12169 is designed specifically for 2017-Present Honda CR-V SUVs.
3,500 lbs trailer weight and 350 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
No drilling is required. The hitch uses existing vehicle access holes and frame attachment points. Fascia trimming with aviation shears is required.
Torque all 7/16" hardware to 59 ft-lbs and all 1/2" hardware to 110 ft-lbs.
Ratchet, 11/16" and 3/4" sockets, 6" socket extension, torque wrench, masking tape, aviation shears, Phillips screwdriver, pry bar, electrical tape, and safety glasses.
Yes. Trim the lower fascia and sensor bracket (if present) using the trim diagrams provided. Aviation shears are required.
Total for 5 items:
$382.56$493.52
On Sale Today
Original price was $344.95. Current price is $233.99.You save $110.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sat, Aug 15
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.