CURT 2" Front Receiver Hitch, Select Dodge, Ram 1500 Trailer HitchCURTOriginal price was $356.95. Current price is $240.99.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2019 - 2024 Ram 1500
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes all necessary installation hardware
Includes all necessary installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Square
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 500 LB / 5,000 LB
Weight Carrying Capacity (Pounds): 5,000 LB
WC Tongue Weight (Pounds): 500 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2" x 2" shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Ram 1500 (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2019 - 2024 | Ram 1500 | No Drilling Required Installation Time: 30-60 minutes Visibility: Concealed |
Yes, the CURT 2" Front Receiver Hitch, Select Ram 1500 Trailer Hitch (Part #BKDK31090) is designed to fit the 2019-2024 Ram 1500.
The CURT 2" Front Receiver Hitch, Select Ram 1500 Trailer Hitch (Part #BKDK31090) fits 2019-2024 Ram 1500 models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 2" Front Receiver Hitch, Select Ram 1500 Trailer Hitch (Part #BKDK31090) fits the following vehicles: 2019-2024 Ram 1500. Always verify your specific year, make, and model before ordering.
The CURT 2" Front Receiver Hitch, Select Ram 1500 Trailer Hitch (Part #BKDK31090) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, the CURT 31090 is designed for RAM 1500 models from 2019 to present. Verify your vehicle year and model match before purchasing.
You will need: ratchet, 3/4", 10mm, and 22mm sockets, torque wrench, tape measure, aviation shears, masking tape, and safety glasses.
No, drilling is not required. The hitch uses provided through holes in the vehicle frame and cabin.
Two people may be required to ease installation, though the manual does not state whether a second person is mandatory.
Torque all 1/2" hardware to 110 ft-lbs and all M14 hardware to 88 ft-lbs.
The hitch has a gross load capacity of 9,000 lbs max when used as a straight line pull, with 5,000 lbs trailer weight and 500 lbs tongue weight. Never exceed your vehicle manufacturer's recommended towing capacity.
The kit includes: 2 M14x2 hex cap screws (part 10-10137), 1 carriage bolt 1/2"-13 UNC 1-3/4" (part 10-10272), 3 carriage bolts 1/2"-13 UNC 1-1/2" (part 10-10287), 4 serrated flange nuts 1/2"-13 UNC (part 20-00062), 5 square hole spacers 0.250 x 1.00 x 2.50" (part CM-SP10), 2 washers 9/16" conical (part 30-00164), and 1 mounting strap (part 31090-MS).
The hitch weight is 34 lbs.
Professional installation time is approximately 30 minutes. Novice (DIY) installation time is approximately 60 minutes.
Yes, the hitch will fit. If tow hooks are present, you must remove them before installation and return them to the owner. The installation uses provided through holes in the vehicle frame that are separate from the tow hook mounting points.
Remove the lower fascia by removing 18 fasteners using a 10mm socket. Set the fascia aside as it will be trimmed and reinstalled later.
Use M14 hex bolts and 9/16" conical washers to attach the hitch to the frame on both sides. Ensure the teeth on the conical washers are against the hitch. These fasteners are torqued to 88 ft-lbs.
Insert 1/2" carriage bolts and CM-SP10 square hole spacers through the front of the vehicle cabin on both sides, using the provided through holes. Secure with 1/2" flange nuts and torque to 110 ft-lbs.
Insert a 1-3/4 x 1/2" carriage bolt and CM-SP10 spacer through the crossmember and out the mounting hole. Raise the 31090-MS mounting strap into position and secure it to the hitch and vehicle using provided 1/2" hardware, torqued to 110 ft-lbs.
Yes, you must trim the lower fascia using the trim diagram as a reference. The trim diagram shows approximately 2.50" sections to be removed on both sides. All dimensions are approximate; confirm fit prior to trim. For frequent users, trim a larger section to easily access the lock pin. After trimming, reinstall the fascia.
Use aviation shears to trim the lower plastic fascia panel. Masking tape can be used to mark the trim lines before cutting.
All 1/2" hardware (carriage bolts and flange nuts) must be torqued to 110 ft-lbs.
All M14 hardware (hex cap screws) must be torqued to 88 ft-lbs.
Safety glasses must be worn at all times while installing this product. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
The gross load capacity when used as a straight line pull is 9,000 lbs max. For maximum line pull rating, the winch cable must not exceed 15 degrees angle up or down from horizontal, or 45 degrees angle left or right from straight ahead. Exceeding these angles or the maximum line pull rating may overload the winch, winch mount, and/or front mounted receiver.
No. Never use a ball and/or ball mount as an anchor point for a tow strap or winch cable. Use OEM tow hooks, recovery eyes, or a clevis mount for attachment of a tow strap or winch cable. Severe personal injury or death could result from improper use.
Attach the return cable to the tow hook or recovery eye when using a snatch block. Do not attach the return cable to the winch mount, as this may overload the winch mount and/or front mounted receiver.
Do not exceed the front axle Gross Weight Rating (GAWR) as listed in your owner's manual or on the specification plate on the driver's door frame. Exceeding GAWR may overload the front axle and/or suspension, resulting in accident, property damage, and personal injury. Do not obstruct vehicle lights, the grille opening, or driver view. Reposition the front-mounted license plate if obstructed. Rear wheel traction may be reduced, affecting handling; reduce speed and drive with caution. The hitch extends the front of the vehicle and may reduce approach angle; use caution when parking and maneuvering.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This is essential for safe operation.
CURT Manufacturing LLC warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT may repair or replace the product at their option when the product is returned, prepaid, with proof of purchase. Alteration to, misuse, or improper installation of this product voids the warranty. CURT's liability is limited to repair or replacement of products found to be defective and specifically excludes liability for incidental or consequential loss or damage.
The CURT 31090 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Call CURT Manufacturing technical support at 877-287-8634. You can also visit www.curtmfg.com for more information or www.hitchinfo.com for helpful towing tips.
On Sale Today
Original price was $401.95. Current price is $270.99.You save $130.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Tue, Aug 25 - Thu, Aug 27
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.