Our in-house experts typically reply within one business day.
CURT
Type
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Always the correct part
We know our products
Quality Products
Free Shipping!
Quality Products
Free Shipping!
Vehicle battery connection required
Warranty: One-Year Limited Warranty
Electrical System Type: 3W
Output Type: 4-Way Flat
Tail Light Circuits: 6.0 Amps
Turn and Brake Circuits: 3.0 Amps
Installation Difficulty: Advanced
Installation Time Exact (Minutes): 15
CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle's wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Acura MDX (to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether you're hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2014 - 2020 | Acura MDX | Installation Time: 30-60 minutes |
Yes, the CURT Custom 4-Flat, Select Acura MDX, OEM Tow Package Required Trailer Connector Kit (Part #BKDK56192) is designed to fit the 2014-2020 Acura MDX.
The CURT Custom 4-Flat, Select Acura MDX, OEM Tow Package Required Trailer Connector Kit (Part #BKDK56192) fits 2014-2020 Acura MDX models. The 2020 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT Custom 4-Flat, Select Acura MDX, OEM Tow Package Required Trailer Connector Kit (Part #BKDK56192) fits the following vehicles: 2014-2020 Acura MDX. Always verify your specific year, make, and model before ordering.
The CURT Custom 4-Flat, Select Acura MDX, OEM Tow Package Required Trailer Connector Kit (Part #BKDK56192) Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, the Curt 56192 is designed for the Acura MDX. It is categorized for SUVs, Mini & Full-Sized Vans and connects via the vehicle's electrical junction box located behind the driver-side rear access panel.
The harness has two circuit ratings: Signal Circuits are rated at 3.0 amps per side, and Tail/Running Circuits are rated at 6.0 amps total. The battery connection must be fuse-protected with a 10-amp maximum fuse. Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower.
You need a flat blade screwdriver. The manual also mentions drilling a 3/32" pilot hole may be required if a suitable existing screw with nut is not available for the grounding point.
The harness includes a 10-amp low profile fuse and a 7.5-amp low profile fuse for the electrical junction box. Install the 10-amp fuse in position 2 and the 7.5-amp fuse in position 11 of the junction box. Additionally, a 10-amp fuse is provided separately for the red fuse holder on the product wiring harness itself.
The electrical junction box is located behind the driver-side rear access panel. To access it, open the hatch, lift up the storage lid, and remove the access panel on the driver-side rear trim panel.
Route the white housing end of the harness from the cargo area on the driver's side under the trim panel up to the junction box. Insert the white housing connector into the receptacle in the electrical junction box. Then install the 10-amp fuse in position 2 and the 7.5-amp fuse in position 11 of the junction box.
Locate a flat spot inside the vehicle and adhere the black converter box using the provided double-sided tape. The location should be convenient and out of the way.
When in use, route the 4-flat connector to the center of the vehicle. When not in use, roll it up and store in a convenient, out-of-the-way location. Secure any loose wires with the provided cable ties.
Drilling may be required for the grounding point. The manual instructs you to locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. If no existing screw is available, drill a 3/32" pilot hole for the provided screw. Before drilling, check for miscellaneous items hidden behind or under any surface to avoid damage and personal injury.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle frame. The area should be free of rust, dirt and paint. Secure the white ground wire using the ring terminal and the provided screw. If no existing screw is available, drill a 3/32" pilot hole for the provided screw.
The battery connection must be fuse-protected with a 10-amp maximum fuse. Exceeding this rating can cause loss of warranty, overheating and potential fire. Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower.
Test for proper function by using a test light or by connecting a properly wired trailer. All installation steps must be followed to ensure the wiring harness functions properly.
Reinstall all items removed during installation. Install the provided 4-flat dust cover to help prevent corrosion. Test for proper function using a test light or by connecting a properly wired trailer.
The harness includes: a 10-amp low profile fuse and 7.5-amp low profile fuse for the junction box, a 10-amp fuse for the red fuse holder on the harness, a white ground wire with ring terminal and provided screw, double-sided tape for the converter box, cable ties for securing loose wires, and a 4-flat dust cover.
Yes, the Curt 56192 is designed for the Acura MDX and connects via the electrical junction box behind the driver-side rear access panel.
A flat blade screwdriver is required. A drill may be needed if an existing grounding screw is not available (3/32" pilot hole).
Drilling may be required for the grounding point if no existing screw with nut is available in the vehicle frame. A 3/32" pilot hole is drilled for the provided screw.
The battery connection must use a 10-amp maximum fuse. Exceeding this rating can cause loss of warranty, overheating and potential fire.
Signal Circuits: 3.0 amps per side. Tail/Running Circuits: 6.0 amps total. Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower.
On Sale Today
Original price was $69.95. Current price is $56.99.You save $12.96 (19%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 16 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$132.94$145.90
No reviews have been added for this product.