Our in-house experts typically reply within one business day.
CURT
Shank
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes dual ball, pins and clip only (weight distribution shank sold separately)
Includes dual ball, pins and clip only (weight distribution shank sold separately)
Finish: Blank
Installation Time Exact (Minutes): 0
The CURT dual ball attachment provides the benefit of having two trailer ball sizes in one. Make adjustments on the go with its 2" and 2-5/16" balls, and tow up to 15,000 lbs. The dual ball design allows your CURT WD shank to adjust for raising and lowering your ball height for quick and precise trailer leveling.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494One-Year Limited
Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
The CURT 45933 has a gross trailer weight (GTW) capacity of 15,000 lbs and a tongue weight (TW) capacity of 1,500 lbs. However, you must never exceed your vehicle manufacturer's recommended towing capacity. The mount's ratings represent only the product's capability, not your vehicle's towing system. Always verify the lowest-rated component in your entire towing setup and stay within that limit.
No special tools are required for assembly and setup. However, before towing, you must use a torque wrench and 3/8" hex drive socket to torque all fasteners to 45–55 lb-ft. A hitch pin and clip (sold separately) are also needed to secure the adjustable shank into your vehicle's receiver tube.
The kit includes one adjustable shank, one dual ball, two pins, and one clip. The adjustable shank is sold separately, so you will need to purchase it if not already included. You must also purchase a hitch pin and clip separately to secure the shank into your receiver tube.
Yes. The hitch pin and clip required to secure the adjustable shank into your trailer hitch receiver are sold separately and are not included in the kit. You will need to purchase these items before installation.
Level your trailer and measure from the bottom of the trailer tongue to the ground. Find the hole on the adjustable shank that is closest to that measurement. The trailer ball platform will be centered on that hole. This ensures proper tongue height and level towing.
1. Slide the tongue onto the shank and align it with the proper hole locations based on your measured ball height. 2. Angle the tongue slightly upwards and press it toward the shank. 3. Insert the first pin into the top tongue hole. 4. Apply downward force to the tongue and slide the second pin into the bottom hole. 5. Secure both pins with the included clip. Note: If using the highest mounting position, install the bottom pin first with the tongue angled downward, then apply upward force to install the second pin.
All fasteners must be torqued to 45–55 lb-ft using a torque wrench and 3/8" hex drive socket. This must be done prior to towing to ensure all fasteners are tight and secure.
No. Never hook trailer safety chains to the mount system. Safety chains must operate freely around the mount system and must not become entangled with it. Failure to follow this instruction could compromise safety.
Before towing, ensure all fasteners are tight and all structural components are sound. Use a torque wrench and 3/8" hex drive socket to torque all hardware to 45–55 lb-ft. Never exceed your vehicle manufacturer's recommended towing capacity, and verify that all components of your towing system are within their rated limits.
Use only mild automotive detergent to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or similar products, as these may damage the finish.
If replacement pins are needed, they must be replaced with original factory mount pins only (CURT# 45931). The provided pins are specifically engineered for this system, and using non-original pins may compromise safety and performance.
Gross trailer weight: 15,000 lbs. Tongue weight: 1,500 lbs. Never exceed your vehicle manufacturer's towing capacity.
No tools required for assembly. Before towing, use a torque wrench and 3/8" hex drive socket to torque fasteners to 45–55 lb-ft. Hitch pin and clip sold separately.
Level the trailer and measure from the bottom of the tongue to the ground. Find the matching hole on the adjustable shank. Insert pins through the tongue into that hole and secure with the clip.
45–55 lb-ft using a torque wrench and 3/8" hex drive socket. Torque before towing.
No. Never hook safety chains to the mount system. Chains must operate freely around it without becoming entangled.
Use mild automotive detergent only. Do not use dish detergent, abrasive cleaners, pads, or wire brushes.
On Sale Today
Original price was $184.95. Current price is $165.95.You save $19.00 (10%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Fri, Sep 18 - Sun, Sep 20
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
