Our in-house experts typically reply within one business day.
Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.
2005 - 2009 Buick Allure
Confirmed to Fit
1997 - 2005 Buick Century
Confirmed to Fit
2005 - 2009 Buick LaCrosse
Confirmed to Fit
1998 - 2002 Oldsmobile Intrigue
Confirmed to Fit
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Always the correct part
We know our products
Always the correct part
We know our products
Quality Products
Free Shipping!
Quality Products
Free Shipping!
DRAW-TITE Class 2 trailer hitches are the perfect mix of style and stability for those times when youre working on a home project or heading out on an adventure. This DRAW-TITE Class 2 receiver hitch is rated for up to 3,500 lbs. gross trailer weight (GTW) and up to 300 lbs. tongue weight (TW). No weight distribution kits can be used on this specific trailer hitch. DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 2 trailer hitch has a 1-1/4 inch square receiver tube opening so you can easily attach accessories like a bike rack or cargo carrier, or a utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 36374 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 28.2 LBS |
| GROSS TOWING WEIGHT: | 3,500 LBS. |
| GROSS TONGUE WEIGHT: | 300 LBS. |
| RECEIVER SIZE: | 1.25 IN. |
| HITCH CLASS: | II |
| DRILLING REQUIRED: | YES |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | CONCEALED |
| CROSS-TUBE TYPE: | SQUARE TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |
Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Experts available to answer your questions
Call 888-634-9494Lifetime
Draw•Tite® and the Checkered Flag Foundation
4 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2005 - 2009 | Buick Allure | — | Class 2 Trailer Hitch: 3500 lbs 300/3,500 lbs. Weight Carrying (tongue weight/gross trailer weight) Drilling Required Install Time is 30 minutes |
| 1997 - 2005 | Buick Century | Sedan | Class 2 Trailer Hitch: 3500 lbs 300/3,500 lbs. Weight Carrying (tongue weight/gross trailer weight) Drilling Required Install Time is 30 minutes |
| 2005 - 2009 | Buick LaCrosse | — | Class 2 Trailer Hitch: 3500 lbs 300/3,500 lbs. Weight Carrying (tongue weight/gross trailer weight) Drilling Required Install Time is 30 minutes |
| 1998 - 2002 | Oldsmobile Intrigue | — | Class 2 Trailer Hitch: 3500 lbs 300/3,500 lbs. Weight Carrying (tongue weight/gross trailer weight) Drilling Required Install Time is 30 minutes |
The Draw-tite Class 2 Trailer Hitch, 1-1/4" Square Receiver, Black for Select Buick Allure, Buick Century, Buick LaCrosse, Oldsmobile Intrigue 36374 (Part #DT36374) fits 2005-2009 Buick Allure models. The 2009 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the Draw-tite Class 2 Trailer Hitch, 1-1/4" Square Receiver, Black for Select Buick Allure, Buick Century, Buick LaCrosse, Oldsmobile Intrigue 36374 (Part #DT36374) is designed to fit the 2005-2009 Buick Allure.
The Draw-tite Class 2 Trailer Hitch, 1-1/4" Square Receiver, Black for Select Buick Allure, Buick Century, Buick LaCrosse, Oldsmobile Intrigue 36374 (Part #DT36374) fits the following vehicles: 2005-2009 Buick Allure; 1997-2005 Buick Century; 2005-2009 Buick LaCrosse; 1998-2002 Oldsmobile Intrigue. Always verify your specific year, make, and model before ordering.
The Draw-tite Class 2 Trailer Hitch, 1-1/4" Square Receiver, Black for Select Buick Allure, Buick Century, Buick LaCrosse, Oldsmobile Intrigue 36374 (Part #DT36374) Drilling is required for installation. Basic hand tools are typically all you need.
Yes, part number 36374 is designed for Buick LaCrosse. The manual also covers Buick Allure (Canada only), Buick Century, and Oldsmobile Intrigue. Each model uses a different access slot in the frame rail during installation—LaCrosse and Allure models use one slot, while Century and Intrigue models use a different slot (see Figure 1).
Yes, part number 36374 is designed for both Buick Century and Oldsmobile Intrigue. During installation, these models use a different frame rail access slot than LaCrosse and Allure models (see Figure 1).
The maximum gross trailer weight is 3500 LB and the maximum tongue weight is 300 LB. However, do not exceed the lower of the towing vehicle manufacturer's rating or these limits.
You will need wrenches in ¾" and 7/8" sizes, a ½" drill bit, and a torque wrench. The torque wrench is essential because all ½-13 GR5 fasteners must be tightened to 75 Lb.-Ft.
The kit includes: (4) carriage bolts ½ x 1¼", (4) blocks ¼ x 1½ x 2", (4) conical toothed washers ½", (4) hex nuts ½", (2) hex bolts ½ x 1¼", (2) lock washers ½", (4) flat washers ½", and (2) handle nut assemblies. Additional ½" flat washers may be needed for spacing to eliminate gaps between the hitch and frame.
Yes, the drawbar kit is sold separately. You can use either drawbar kit 36061 or 90005. The drawbar must be used in the RISE position only.
The manual does not specify whether the battery must be disconnected. Consult the vehicle manufacturer's service manual or a qualified installer for this requirement.
Yes. Step 1 requires you to detach (5) rubber exhaust hangers and lower the rearward portion of the exhaust system to access the frame rails. The exhaust system is reinstalled in Step 7 after the hitch is secured.
1. Detach (5) rubber exhaust hangers and lower the rearward portion of the exhaust system. 2. Insert carriage bolts and blocks into frame rails through the access hole. 3. Raise the hitch into position and check side-to-side clearance with the frame; tape ½" washers to the hitch as needed to eliminate gaps. 4. Raise the hitch into position and attach with carriage bolts (see Figure 1). 5. Using the hitch as a template, drill 2 holes in the sides of the frame rails. 6. Insert hex bolts and lock washers through the side frame rail and secure with handle nut assemblies inserted through the end of the frame rail. 7. Reinstall the exhaust system.
Yes. In Step 5, you must drill 2 holes in the sides of the frame rails using the hitch as a template. A ½" drill bit is required. Do not use a torch to cut these holes.
A ½" drill bit is required to drill the two holes in the frame rails (Step 5).
All ½-13 GR5 fasteners must be tightened to 75 Lb.-Ft. using a torque wrench.
Observe safety precautions when working beneath the vehicle and wear eye protection. Do not cut access or attachment holes with a torch. If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes. A damaged hitch or ball must be removed and replaced immediately.
Check the hitch frequently to ensure all fasteners and the ball are properly tightened. The manual emphasizes regular inspection but does not specify an exact interval beyond "frequently."
The manual provides two different access slots in the frame rail. Use the slot labeled for LaCrosse and Allure models if you have a LaCrosse or Allure. Use the slot labeled for Century and Intrigue models if you have a Century or Intrigue (see Figure 1).
In Step 3, you tape ½" flat washers to the hitch to eliminate gaps between the hitch and the frame rail. The number of washers needed depends on your specific vehicle's frame geometry. Use as many washers as necessary to achieve proper side-to-side clearance (see Figure 2).
The drawbar must be used in the RISE position only. Do not use it in any other position.
Yes, hitch 36374 fits all four models. LaCrosse and Allure use one frame rail access slot; Century and Intrigue use a different slot (see Figure 1).
Wrenches (¾" and 7/8"), a ½" drill bit, and a torque wrench (to tighten fasteners to 75 Lb.-Ft.).
Tighten all ½-13 GR5 fasteners to 75 Lb.-Ft. using a torque wrench.
Maximum gross trailer weight is 3500 LB; maximum tongue weight is 300 LB. Do not exceed the lower of your vehicle manufacturer's rating or these limits.
Yes, detach (5) rubber exhaust hangers and lower the rearward portion of the exhaust system in Step 1. Reinstall it in Step 7 after the hitch is secured.
No, the drawbar kit (36061 or 90005) is sold separately. The drawbar must be used in the RISE position only.
Total for 4 items:
$148.57
On Sale Today
Original price was $371.25. Current price is $269.61.You save $101.64 (27%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Aug 12 - Sat, Aug 15
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
George
Ordered online. Shipment arrived on time and with all the correct parts. Great customer service and friendly staff. Also, pricing was great!
May 22, 2023
