Our in-house experts typically reply within one business day.
Draw-tite
On Sale Today
Original price was $388.75. Current price is $269.61.Verify Fitment
Select your vehicle to confirm this part fits.
2015 - 2018 Audi Q3
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
You save $119.14 (31%)
Free Shipping
Ships free on all orders
Authorized DealerSelect your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 16 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
DRAW-TITE Class 3 trailer hitches are the perfect mix of style and stability for those times when youre working on a home project or heading out on an adventure. This DRAW-TITE Class 3 receiver hitch is rated for up to 4,500 lbs. gross trailer weight (GTW) and up to 450 lbs. tongue weight (TW). No weight distribution kits can be used on this specific trailer hitch. DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 3 trailer hitch has a 2 inch square receiver tube opening so you can easily attach accessories like a bike rack or cargo carrier, or a utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 75218 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 40 LBS |
| GROSS TOWING WEIGHT: | 4,500 LBS. |
| GROSS TONGUE WEIGHT: | 450 LBS. |
| RECEIVER SIZE: | 2 IN. |
| HITCH CLASS: | III |
| DRILLING REQUIRED: | NO |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | CONCEALED |
| CROSS-TUBE TYPE: | SQUARE TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |
Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Experts available to answer your questions
Call 888-634-9494Lifetime
Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
Draw-Tite® Trailer Hitches | Receiver Hitches
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2015 - 2018 | Audi Q3 | Class 3 Trailer Hitch: 4500 lbs 450/4,500 lbs. Weight Carrying (tongue weight/gross trailer weight) Uses all existing holes. No Drilling required Install Time is 50 minutes |
Yes, the Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Audi Q3 75218 (Part #DT75218) is designed to fit the 2015-2018 Audi Q3.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Audi Q3 75218 (Part #DT75218) fits 2015-2018 Audi Q3 models. The 2018 model year is the last year covered by this part number. For newer models, check for an updated version.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Audi Q3 75218 (Part #DT75218) fits the following vehicles: 2015-2018 Audi Q3. Always verify your specific year, make, and model before ordering.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Audi Q3 75218 (Part #DT75218) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes. Part number 75218 is designed for 2012-current Audi Q3 models. Visit the manufacturer's website for the most up-to-date information regarding specific application years and trim levels.
The 75218 is a weight-carrying hitch with a maximum gross trailer weight of 4500 lb (2043 kg) and maximum tongue weight of 450 lb (204 kg). Do not exceed the lower of your towing vehicle manufacturer's rating or these limits.
Required tools: ratchet, torque wrench, safety glasses, 13 mm and 11/16" sockets, T20 and T30 star drivers, utility knife, and marker. A torque wrench is essential for proper fastener tightening.
Yes. You must remove the bumper using a 13 mm socket to remove 2 screws on the driver side and 4 screws on the passenger side. The bumper and screws are returned to the customer after installation.
Yes. You must trim a 3.5" tall by 3.5" wide area from the center line of the lower fascia, beginning from the slot opening. Additional trimming may be needed to avoid interference between the fascia and hitch.
All 7/16" GR5 fasteners must be tightened to 50 Lb.-Ft. (68 N·M) using a torque wrench. Proper torque is essential to keep the hitch secure to the vehicle when towing.
The maximum tongue weight is 450 lb (204 kg). Do not exceed this limit or the lower of your towing vehicle manufacturer's rating.
Check that all fasteners and the ball are properly tightened. Check the hitch frequently to ensure all fasteners remain tight and the hitch is securely mounted to the vehicle. Verify that the trimmed fascia area is sufficient to avoid interference with the hitch.
The fastener kit (75218F) includes: 4 carriage bolts 7/16"-14 x 1.75 GR5, 4 spacers (.188 x 1 x 2), 4 conical washers 7/16", 4 hex nuts 7/16"-14 GR2, and 4 pull wires 7/16". These fasteners are used to secure the hitch brackets to the vehicle frame rails.
Raise the hitch into position and insert the brackets into the frame rails opening. Feed the carriage bolt and spacer through the frame rails opening using the pull wires. Pull the wires through the slots on the bracket first, then through the holes on the frame rails. Remove the pull wires and loosely install the conical washer and hex nut to the hitch before final tightening.
Remove the lower fascia by using a T20 or T30 star driver to remove 4 screws at the bottom fascia and 3 screws inside the wheel well on each side. This provides access to the frame rails for hitch installation.
The hitch uses 4 carriage bolts with the following specifications: 7/16"-14 x 1.75 GR5. These bolts are tightened to 50 Lb.-Ft. (68 N·M) using a torque wrench.
Locate the center line of the lower fascia and trim a 3.5" tall by 3.5" wide area, beginning from the slot opening in the fascia. After reinstalling the fascia, double-check that the trim area is sufficient to avoid interference between the fascia and hitch, and make additional trimming if needed.
Always wear safety glasses when installing the hitch. Observe safety precautions when working beneath a vehicle. Do not cut access or attachment holes with a torch. If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes.
If excess sway occurs, take your foot off the gas pedal and hold the steering wheel as steady as possible. Do not apply your brakes and do not speed up. Slow down when towing and never exceed any posted speed limit.
Check the hitch frequently, making sure all fasteners and the ball are properly tightened. Periodically verify that the hitch is securely mounted to your vehicle. This is essential for safe towing.
No. The 75218 is a weight-carrying hitch only. The manual indicates that weight-distributing capability is not available (marked as 'X' in the hitch type table).
No. When installing the carriage bolts and spacers through the frame rails, loosely install the conical washer and hex nut to the hitch first. Only after all fasteners are in place should you tighten all 7/16" GR5 fasteners to 50 Lb.-Ft. (68 N·M) using a torque wrench.
Load the trailer heavier in front. This helps maintain proper weight distribution and improves towing stability.
No. The 75218 is designed for 2012-current Audi Q3 models only. For information about fitment on other model years or trim levels, visit the manufacturer's website.
Remove a total of 7 screws: 4 screws from the bottom fascia and 3 screws from inside the wheel well on each side (6 screws total from both wheel wells). Use a T20 or T30 star driver for this task.
The driver side has 2 screws and the passenger side has 4 screws, for a total of 6 bumper screws. Use a 13 mm socket to remove them. The bumper and screws are returned to the customer after installation.
You will need 13 mm and 11/16" sockets. The 13 mm socket is used to remove bumper screws, and the 11/16" socket is used for fastener installation.
T20 and T30 star drivers are required. These are used to remove the 4 screws from the bottom fascia and the 3 screws from inside each wheel well.
The pull wires are used to feed the carriage bolts and spacers through the frame rails opening. You pull the wires through the slots on the bracket first, then through the holes on the frame rails. After the bolts and spacers are in position, the pull wires are removed.
The hitch uses 4 hex nuts with the specification 7/16"-14 GR2. These nuts are installed on the carriage bolts and tightened to 50 Lb.-Ft. (68 N·M).
The hitch uses 4 spacers with the specifications .188 x 1 x 2 inches. These spacers are installed between the carriage bolts and the frame rails.
The hitch uses 4 conical washers with a 7/16" specification. These washers are installed between the hex nuts and the frame rails.
A hitch or ball which has been damaged should be removed and replaced. Do not attempt to repair or continue using a damaged hitch, as this compromises towing safety.
If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes. This protects the vehicle's interior and prevents corrosion.
The average installation time for professional installers is 50 minutes. If you do not feel comfortable performing this installation on your own or are in need of assistance, please contact a professional installer.
Always wear your seatbelt. Load the trailer heavier in front. Slow down when towing and never exceed any posted speed limit. Do not exceed the lower of your towing vehicle manufacturer's rating or the hitch's maximum capacity (4500 lb GVWR, 450 lb tongue weight). If excess sway occurs, take your foot off the gas pedal, hold the steering wheel steady, do not apply brakes, and do not speed up.
The 75218 hitch is covered by a Limited Lifetime Warranty from Cequent Performance Products, Inc. The warranty covers material defects in both material and workmanship, excluding ordinary wear and tear. The warranty is valid only if the product is installed, maintained, and used according to the manufacturer's instructions. To make a warranty claim, contact Cequent at 1-800-632-3290 or 47912 Halyard Drive, Suite 100, Plymouth, MI 48170.
Do not cut, weld, or modify the receiver. Any modifications to the hitch may compromise its structural integrity and safety, and will likely void the warranty.
If the trimmed fascia area is not sufficient to avoid interference between the fascia and hitch, make additional trimming as needed. The initial trim is 3.5" tall by 3.5" wide from the center line of the lower fascia, but additional material may need to be removed to ensure proper clearance.
Check the hitch frequently to ensure all fasteners remain tight. If fasteners have loosened, retighten them to 50 Lb.-Ft. (68 N·M) using a torque wrench. Loose fasteners compromise the security of the hitch and create a safety hazard when towing.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
Total for 4 items:
$134.54$137.05
Ann
Ordered online. Shipment arrived on time and with all the correct parts. Great customer service and friendly staff. Also, pricing was great!
May 22, 2023
