Our in-house experts typically reply within one business day.
Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.
2019 - 2025 Audi Q3
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
DRAW-TITE Class 3 trailer hitches are the perfect mix of style and strength to get you and your equipment wherever you need to go. This DRAW-TITE Class 3 receiver hitch is rated for up to 4,500 lbs. gross trailer weight (GTW) and up to 675 lbs. tongue weight (TW). They are also suitable for use with weight distribution up to 4,500 lbs. weight distribution (WD) and 675 lbs. weight distribution tongue weight (WDTW). DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 3 trailer hitch has a 2 inch square receiver tube opening, allowing you to attach accessories like a bike rack or cargo carrier, or hook up your pop-up, boat trailer, or utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 76364 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 32 LBS |
| GROSS TOWING WEIGHT: | 4,500 LBS. |
| GROSS TONGUE WEIGHT: | 675 LBS. |
| RECEIVER SIZE: | 2 IN. |
| HITCH CLASS: | III |
| DRILLING REQUIRED: | NO |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | CONCEALED |
| CROSS-TUBE TYPE: | SQUARE TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |
| GROSS TOWING WEIGHT WITH WEIGHT DISTRIBUTION: | 4,500 LBS. |
| GROSS TONGUE WEIGHT WITH WEIGHT DISTRIBUTION: | 675 LBS. |
Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Experts available to answer your questions
Call 888-634-9494Lifetime
Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2019 - 2025 | Audi Q3 | Class 3 Trailer Hitch: 4500 lbs 675/4,500 lbs. Weight Carrying (tongue weight/gross trailer weight) 675/4,500 lbs. when used with a Weight Distribution Kit (tongue weight/gross trailer weight) Uses all existing holes. No Drilling required Install Time is 40 minutes |
Yes, the Draw-tite Class 3 Trailer Hitch 76364 is specifically designed to fit 2019-2025 Audi Q3 models, so your 2025 Q3 is covered. This custom-built hitch provides a perfect fit with 4,500 lbs towing capacity and includes all necessary mounting hardware. It features a concealed design that maintains your vehicle's appearance while giving you a 2" square receiver for all your towing needs.
Absolutely! The Draw-tite Class 3 hitch (part #76364) is engineered specifically for 2019-2025 Audi Q3 models, including your 2022. You'll get the full 4,500 lbs GTW and 675 lbs tongue weight capacity, plus it's a bolt-on installation with no drilling required.
This Draw-tite Class 3 hitch (part #76364) is specifically engineered for 2019-2025 Audi Q3 models only. It's a custom-designed application that ensures perfect fitment and maintains the vehicle's structural integrity. The hitch provides 4,500 lbs towing capacity with a durable black powder coat finish and lifetime limited warranty.
Installation is pretty straightforward since this is a bolt-on hitch that requires no drilling and mounts directly to your Q3's frame. All mounting hardware is included in the box, and the hitch is custom-designed for your vehicle's specifications. The concealed design means it integrates cleanly with your Audi's look once installed.
Yes. Part numbers 76364, 84364, and CQT76364 are designed for 2019-current Audi Q3 models. Visit the Horizon Global website for the most up-to-date information regarding specific application years and trim levels.
Maximum Gross Trailer Weight is 4500 lb (2041 kg) and maximum tongue weight is 675 lb (306 kg) for both weight-carrying and weight-distributing configurations. Do not exceed the lower of your towing vehicle manufacturer's rating or these limits.
Required tools: ratchet, 13 mm socket, 7/8" socket, 6" socket extension, torque wrench, safety glasses, tape measure, marker, tin snips, utility knife, pliers (for exhaust removal). Installation time is approximately 40 minutes for professional installers.
Yes. The bumper fascia must be trimmed. Trim 3.25" on each side of the centerline on the bottom (total 3.25" if no trailer wiring connector is used, or 7.25" on one side if trailer wiring is used). Trim 10.5" on the vertical portion. Do not trim away the bottom edge. Dimensions are approximate and may be adjusted for fit and aesthetics.
Yes. Lower the exhaust by removing 2 bolts from each rear exhaust hanger bracket (1 per side) using a 13 mm socket. Be sure the exhaust is supported to avoid damage during installation.
Tighten all 7/16" fasteners with a torque wrench to 50 Ft. Lb. (68 N·M). Proper torque is needed to keep the hitch secure to the vehicle when towing.
If excess sway occurs, take your foot off the gas pedal and hold the steering wheel as steady as possible. Do NOT apply your brakes and do NOT speed up.
Check the hitch frequently to ensure all fasteners and the ball are properly tightened. Periodically verify that the hitch is securely mounted to your vehicle.
Fastener kit 76364F includes: (4) carriage bolts 7/16-14 x 1.5" GR5, (4) spacers 0.109" x 0.88" x 2" (part 1204), (4) conical washers 7/16" (part 01292007), (4) hex nuts 7/16" GR2, and (4) pullwires 7/16"-14 (part 5481).
No. Do not cut, weld, or modify this receiver. Doing so may compromise the structural integrity and safety of the hitch.
The manual specifies this hitch is designed for 2019-current Audi Q3 models. For information about compatibility with earlier model years, visit the Horizon Global website at www.horizonglobal.com or contact technical support at 800-632-3290.
No. You only need to lower the exhaust by removing 2 bolts from each rear exhaust hanger bracket (1 per side) using a 13 mm socket. Support the exhaust to avoid damage. The exhaust is reinstalled after the hitch is mounted.
The fish wire is used to install the carriage bolts and spacers through the access hole in the vehicle frame. The hardware is kept inside the frame until the hitch is in position, with the fish wire remaining attached to the hardware to facilitate pulling the bolts through the attachment holes.
Install the conical washers with the teeth side facing toward the hitch. This orientation ensures proper load distribution and fastener security.
The 7.25" dimension is to make room for a trailer wiring connector. If you are not using trailer wiring, the trim area can be 3.25" on each side of the centerline of the fascia instead. All dimensions are approximate and may be adjusted for fit and aesthetics.
The manual specifies not to trim away the bottom edge, but does not explain the reason. This is likely to maintain structural integrity and proper fitment of the bumper fascia.
Remove excess caulk from the frame rails in the hitch installation area and attachment holes. This ensures proper fitment and allows the hitch to seat correctly against the vehicle frame.
1. Trim bumper fascia. 2. Remove excess caulk from frame rails. 3. Lower exhaust by removing hanger bolts. 4. Install carriage bolts and spacers through frame access hole using fish wire. 5. Raise hitch into position over exhaust, align holes, and pull bolts through attachment holes. 6. Install conical washers (teeth toward hitch) and nuts. 7. Tighten all 7/16" fasteners to 50 Ft. Lb. (68 N·M). 8. Reinstall exhaust muffler.
Raise the hitch into position over the exhaust and forward enough so that the receiver clears the bottom edge of the fascia. Align the holes in the hitch with the holes in the vehicle frame, then pull the bolts that were installed earlier through the attachment holes.
The manual does not explicitly state whether drilling is required. The vehicle frame appears to have pre-existing access holes and attachment holes, but the manual does not confirm whether these are factory-drilled or require drilling during installation. Contact Horizon Global technical support at 800-632-3290 for clarification.
Use tin snips or a utility knife to trim the bumper fascia. Do not use a torch to cut access or attachment holes, as this may damage the vehicle.
Always wear safety glasses when installing the hitch. Observe safety precautions when working beneath a vehicle. Wear eye protection. Support the exhaust to avoid damage when lowering it. Do not use a torch to cut access or attachment holes.
Always wear your seatbelt. Load the trailer heavier in front. Slow down when towing and never exceed any posted speed limit. Do not exceed the lower of your towing vehicle manufacturer's rating or 4500 lb GVWR / 675 lb tongue weight. If excess sway occurs, take your foot off the gas pedal and hold the steering wheel steady. Do not apply brakes and do not speed up.
If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced.
Check the hitch frequently to ensure all fasteners and the ball are properly tightened. Periodically verify that the hitch is securely mounted to your vehicle. The manual does not specify an exact retorque interval.
Periodically check that all fasteners are tight and the hitch is securely mounted to your vehicle. The manual does not specify other maintenance requirements beyond periodic fastener inspection.
Horizon Global provides a Limited Lifetime Warranty to the original consumer purchaser. The product is warranted to be free from material defects in material and workmanship, ordinary wear and tear excepted. The warranty is valid only if products are returned for inspection, defects are not caused by misuse, neglect, improper installation, or accident, and the product was installed and maintained according to instructions. Product replacement is the sole remedy. Contact Horizon Global at 47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, or TechnicalSupport@horizonglobal.com to make a warranty claim.
Contact Horizon Global technical support at 800-632-3290 or TechnicalSupport@horizonglobal.com. You can also visit www.horizonglobal.com for additional information. For step-by-step photo installation instructions, scan the QR code on the manual or visit http://qr.towingproducts.net/qrproducts/qr-product.
The manual states that the installation time is approximately 40 minutes for professional installers. It recommends: "If you do not feel comfortable performing this installation on your own or are in need of assistance, please contact a professional installer." Professional installation is not required but is recommended if you are uncomfortable with the process.
Tighten all 7/16" fasteners with a torque wrench to 50 Ft. Lb. (68 N·M). Check the hitch frequently to ensure all fasteners remain properly tightened. Proper torque is needed to keep the hitch secure to the vehicle when towing.
Ensure the hitch is raised into position over the exhaust and moved forward enough so that the receiver clears the bottom edge of the fascia. Align the holes in the hitch with the holes in the vehicle frame before pulling the bolts through. If alignment is still difficult, verify that the bumper fascia has been trimmed correctly and that the exhaust has been lowered sufficiently.
The exhaust is lowered by removing 2 bolts from each rear exhaust hanger bracket (1 per side) using a 13 mm socket. If the bolts are stuck or difficult to remove, apply penetrating oil and allow it to soak. Be sure to support the exhaust to avoid damage. If the exhaust still cannot be lowered, contact a professional installer or Horizon Global technical support at 800-632-3290.
The access hole in the vehicle frame is used to install the carriage bolts and spacers using fish wire. If you cannot locate this hole, refer to the step-by-step photo installation instructions available by scanning the QR code on the manual or visiting http://qr.towingproducts.net/qrproducts/qr-product. You can also contact Horizon Global technical support at 800-632-3290 for assistance.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $327.50. Current price is $233.49.You save $94.01 (29%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 16 - Wed, Aug 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$134.54$137.05
Matt
The staff was able to quickly assist me with locating the correct product I needed. Shipping was really fast. Item arrived in 2 days. Will be using TowUniverse again!!
May 22, 2023
