Our in-house experts typically reply within one business day.
Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.
2008 - 2013 Toyota Highlander
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
DRAW-TITE Class 3 trailer hitches are the perfect mix of style and strength to get you and your equipment wherever you need to go. This DRAW-TITE Class 3 receiver hitch is rated for up to 5,000 lbs. gross trailer weight (GTW) and up to 750 lbs. tongue weight (TW). They are also suitable for use with weight distribution up to 5,000 lbs. weight distribution (WD) and 750 lbs. weight distribution tongue weight (WDTW). DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 3 trailer hitch has a 2 inch square receiver tube opening, allowing you to attach accessories like a bike rack or cargo carrier, or hook up your pop-up, boat trailer, or utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 75726 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 48 LBS |
| GROSS TOWING WEIGHT: | 5,000 LBS. |
| GROSS TONGUE WEIGHT: | 750 LBS. |
| RECEIVER SIZE: | 2 IN. |
| HITCH CLASS: | III |
| DRILLING REQUIRED: | NO |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | VISIBLE |
| CROSS-TUBE TYPE: | ROUND TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |
| GROSS TOWING WEIGHT WITH WEIGHT DISTRIBUTION: | 5,000 LBS. |
| GROSS TONGUE WEIGHT WITH WEIGHT DISTRIBUTION: | 750 LBS. |
Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Experts available to answer your questions
Call 888-634-9494Lifetime
Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
Draw•Tite® and the Checkered Flag Foundation
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2013 | Toyota Highlander | Class 3 Trailer Hitch: 5000 lbs 750/5,000 lbs. Weight Carrying (tongue weight/gross trailer weight) 750/5,000 lbs. when used with a Weight Distribution Kit (tongue weight/gross trailer weight) Uses all existing holes. No Drilling required Install Time is 40 minutes |
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Toyota Highlander 75726 (Part #DT75726) fits the following vehicles: 2008-2013 Toyota Highlander. Always verify your specific year, make, and model before ordering.
Yes, the Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Toyota Highlander 75726 (Part #DT75726) is designed to fit the 2008-2013 Toyota Highlander.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Toyota Highlander 75726 (Part #DT75726) fits 2008-2013 Toyota Highlander models. The 2013 model year is the last year covered by this part number. For newer models, check for an updated version.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Toyota Highlander 75726 (Part #DT75726) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, part number 75726 is designed for the Toyota Highlander. The manual specifies wiring access locations SUV3 and SUV4 for this vehicle. However, the manual does not specify which model years or generations of Highlander are compatible. Contact the manufacturer or your installer to confirm your specific Highlander model year is supported.
The maximum gross trailer weight is 5000 lb (2270 kg) and the maximum tongue weight is 750 lb (341 kg). However, you must not exceed the lower of the hitch rating or your vehicle manufacturer's towing rating. Check your Toyota Highlander owner's manual for the vehicle's maximum towing capacity and use whichever is lower.
You will need wrenches in 10mm, 12mm, 14mm, and 17mm sizes, a small screwdriver, a Phillips head screwdriver, and a 6" socket extension. The fastener kit 75726F is included with the hitch.
Yes. You must remove the plastic appearance panels that cover the driver's and passenger's side frame rails. Remove the plastic rivets fastening the fascia tabs to the appearance panel by removing the center of the rivet with a small screwdriver. The passenger's side panel can be reinstalled after installation. Return the driver's side panel and fasteners to the vehicle owner.
Yes. Remove the tow hooks from each frame rail and return the hooks and fasteners to the vehicle owner.
Remove the plastic and rubber plugs from the bottom of the frame rail and from the outside frame rails. Return these plugs to the vehicle owner.
Raise the hitch over the exhaust tip carefully. Be careful not to pinch the heating and cooling hoses on the outside of the passenger side frame rail or scratch the fascia. If additional clearance is needed, lower the exhaust. Remove excess caulking from the rails if needed. Note that the hitch will contact a fascia tab on the passenger side at the exhaust bridge—this is normal.
The hitch uses existing weldnuts in the vehicle frame. Install fasteners to the bottom of the frame rails and to the outside of the frame rails. Do not tighten fasteners until all are installed. Be careful not to pinch hoses when installing fasteners on the outside of the frame rail.
All M10 x 1.25 CL10.9 fasteners must be tightened to 42 lb-ft (57 N·m) using a torque wrench.
The fastener kit 75726F includes 9 hex bolts (M10 x 1.25 x 30mm CL10.9) and 9 conical toothed washers (3/8").
Yes. After all fasteners are torqued to specification, reinstall the vehicle exhaust if it was removed or lowered for clearance during installation.
Yes. The passenger side appearance panel can be reinstalled after the hitch installation is complete. The driver's side panel should be returned to the vehicle owner.
When stowing a spare tire or flat tire, it is necessary to lift the rear edge of the tire to clear the hitch.
If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes.
Check the hitch frequently, making sure all fasteners and the ball are properly tightened.
A hitch or ball which has been damaged should be removed and replaced. Do not continue to use a damaged hitch.
Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. Be careful not to pinch heating and cooling hoses on the passenger side frame rail.
Yes, the 75726 is designed for the Toyota Highlander. Confirm your specific model year with the manufacturer or installer, as the manual does not specify which generations are supported.
Maximum 5000 lb (2270 kg) gross trailer weight and 750 lb (341 kg) tongue weight, but do not exceed your vehicle manufacturer's rating—use whichever is lower.
Wrenches (10mm, 12mm, 14mm, 17mm), small screwdriver, Phillips head screwdriver, 6" socket extension, and torque wrench. Fastener kit 75726F is included.
Yes. Remove plastic appearance panels covering the frame rails, plastic rivets, factory tow hooks, and plastic/rubber plugs from the frame rails.
All M10 x 1.25 CL10.9 fasteners must be torqued to 42 lb-ft (57 N·m).
Not necessarily. Raise the hitch over the exhaust tip carefully. Lower the exhaust only if additional clearance is needed. Reinstall the exhaust after fasteners are torqued.
Lift the rear edge of the spare or flat tire to clear the hitch when stowing it.
Check the hitch frequently to ensure all fasteners and the ball are properly tightened.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
Total for 5 items:
$397.85$499.55
George
Ordered online. Shipment arrived on time and with all the correct parts. Great customer service and friendly staff. Also, pricing was great!
May 22, 2023
On Sale Today
Original price was $362.50. Current price is $263.31.You save $99.19 (27%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
