Our in-house experts typically reply within one business day.
Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.
2019 - 2026 Acura RDX
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
DRAW-TITE Class 3 trailer hitches are the perfect mix of style and stability for those times when youre working on a home project or heading out on an adventure. This DRAW-TITE Class 3 receiver hitch is rated for up to 3,500 lbs. gross trailer weight (GTW) and up to 350 lbs. tongue weight (TW). No weight distribution kits can be used on this specific trailer hitch. DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 3 trailer hitch has a 2 inch square receiver tube opening so you can easily attach accessories like a bike rack or cargo carrier, or a utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 76268 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 27.85 LBS |
| GROSS TOWING WEIGHT: | 3,500 LBS. |
| GROSS TONGUE WEIGHT: | 350 LBS. |
| RECEIVER SIZE: | 2 IN. |
| HITCH CLASS: | III |
| DRILLING REQUIRED: | NO |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | VISIBLE |
| CROSS-TUBE TYPE: | ROUND TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |
Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Experts available to answer your questions
Call 888-634-9494Lifetime
Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
Draw-Tite® Trailer Hitches | Receiver Hitches
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2019 - 2026 | Acura RDX | Class 3 Trailer Hitch: 3500 lbs 350/3,500 lbs. Weight Carrying (tongue weight/gross trailer weight) Uses all existing holes. No Drilling required Install Time is 25 minutes |
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Acura RDX 76268 (Part #DT76268) fits the following vehicles: 2019-2026 Acura RDX. Always verify your specific year, make, and model before ordering.
Yes, the Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Acura RDX 76268 (Part #DT76268) is designed to fit the 2019-2026 Acura RDX.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Acura RDX 76268 (Part #DT76268) fits 2019-2026 Acura RDX models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The Draw-tite Class 3 Trailer Hitch, 2" Square Receiver, Black for Select Acura RDX 76268 (Part #DT76268) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes. Part numbers 76268, 84268, and CQT76268 are designed for 2019-Current Acura RDX models. Visit the manufacturer's website for the most up-to-date information regarding specific application years and trim levels.
This is a weight-carrying hitch with a maximum gross trailer weight of 3500 lb (1589 kg) and maximum tongue weight of 350 lb (159 kg). Do not exceed the lower of your towing vehicle manufacturer's rating or these limits.
Required tools: ratchet, 19 mm sockets, 6-inch socket extension, torque wrench, prybar, exhaust removal pliers, and safety glasses. A representative vehicle photo and hitch illustration are provided in the manual.
Yes. You must lower the spare tire using the vehicle's lowering tools and mechanism (consult your vehicle owner's manual) and set it aside before installing the hitch. Reinstall it after the hitch is secured.
Tighten all M12 fasteners to 42 lb-ft (57 N·m) using a torque wrench.
Yes. Always wear safety glasses when installing the hitch. The manual also recommends observing safety precautions when working beneath a vehicle and wearing eye protection.
The manual does not specify whether battery disconnection is required. Consult your vehicle owner's manual or a professional installer if you are unsure.
No drilling is required. The hitch uses existing weldnuts in the vehicle's frame rail side. The manual explicitly states: "Do not cut access or attachment holes with a torch."
The hitch is available under part numbers 76268, 84268, and CQT76268. The fastener kit is part number 76268F, and the conical washers are part number 01292008.
Yes, this hitch is designed for 2019-Current Acura RDX models. However, the manual recommends visiting the manufacturer's website at www.horizonglobal.com for the most up-to-date information regarding specific application years and trim levels, as compatibility may vary.
No. This is a weight-carrying hitch only. Weight-distributing capability is listed as "n/a" in the product specifications. It is not designed for weight-distributing trailers.
The fastener kit (76268F) includes: (4) M12 x 1.25 x 40mm Class 10.9 hex bolts and (4) 1/2-inch conical washers (part number 01292008). The conical washers must be installed with the teeth side facing toward the hitch.
Install the conical washers with the teeth side facing toward the hitch. The washers are placed between the hex bolts and the hitch attachment points on the vehicle's weldnuts.
Follow these steps in order: (1) Lower the spare tire and set aside; (2) Lower the exhaust by removing rubber hangers from in front of and behind the muffler, supporting the exhaust to prevent damage; (3) Raise the hitch into position, aligning attachment holes to the rearmost weldnuts on each side of the frame rail, and install bolts and conical washers (teeth side toward hitch); (4) Tighten all M12 fasteners to 42 lb-ft (57 N·m) with a torque wrench; (5) Raise the exhaust back into position, reinstall all hangers, and reinstall the spare tire.
Align the hitch attachment holes to the rearmost weldnuts in the side of the frame rail on each side of the vehicle. Make sure the weldnuts are clear from rust and debris before installation.
Using exhaust removal pliers or a prybar, remove the rubber exhaust hangers from in front of the muffler and behind the muffler. Be sure to support the exhaust to prevent damage during removal and while the hitch is being installed.
Locate the lowering tools and mechanism in your vehicle (consult your vehicle owner's manual for specific instructions), then lower the spare tire and set it aside. You will reinstall it after the hitch installation is complete.
All M12 fasteners must be tightened to 42 lb-ft (57 N·m) using a torque wrench. Proper torque is essential to keep the hitch secure to the vehicle when towing.
Check the hitch frequently to ensure all fasteners and the ball are properly tightened. The manual emphasizes that periodic checking is necessary to maintain secure mounting during towing.
If excessive sway occurs, take your foot off the gas pedal and hold the steering wheel as steady as possible. Do not apply your brakes and do not speed up. Reduce speed and maintain steady steering control.
Load the trailer heavier in front. This helps maintain proper weight distribution and stability while towing.
Slow down when towing and never exceed any posted speed limit. The manual emphasizes that reduced speed is essential for safe towing.
No. Do not cut, weld, or modify this receiver. Any modifications will compromise the structural integrity and safety of the hitch.
The manual states that the average installation time for professional installers is 30 minutes. If you do not feel comfortable performing this installation on your own or are in need of assistance, please contact a professional installer.
If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes. This protects the vehicle's interior and prevents corrosion.
A hitch or ball which has been damaged should be removed and replaced. Do not attempt to repair a damaged hitch, as it may not be safe for towing.
This hitch is covered by a Limited Lifetime Warranty from Horizon Global Americas Inc. The warranty covers material defects in both material and workmanship, excluding ordinary wear and tear. The warranty is valid only if the product is installed, maintained, and used according to the manufacturer's instructions. To make a warranty claim, contact Horizon Global at 47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, or TechnicalSupport@horizonglobal.com. Product replacement is the sole remedy under this warranty.
For technical assistance, contact Horizon Global Americas Inc. at 1-800-632-3290 or TechnicalSupport@horizonglobal.com. You can also visit their website at www.horizonglobal.com.
The spare tire must be lowered and removed before hitch installation. The manual does not specify whether the hitch interferes with the spare tire when it is reinstalled. Consult the manufacturer or a professional installer for clarification on spare tire clearance after installation.
The exhaust must be lowered during installation by removing the rubber hangers from in front of and behind the muffler. The manual does not specify whether the hitch interferes with the exhaust when it is reinstalled. Consult the manufacturer or a professional installer for clarification on exhaust clearance after installation.
Check that all fasteners are tight using a torque wrench. All M12 fasteners must be tightened to 42 lb-ft (57 N·m). The manual emphasizes: "Check hitch frequently, making sure all fasteners and ball are properly tightened." If fasteners are loose, retorque them to the specified value.
The manual states: "Make sure the weldnuts are clear from rust and debris. Raise the hitch into position aligning the attachment holes to the rearmost weldnuts in the side of the frame rail." If alignment is difficult, ensure the weldnuts are clean and the hitch is being raised straight into position. If alignment remains impossible, the vehicle may not be compatible or may require professional assessment.
The manual states: "Using exhaust removal pliers or prybar remove the rubber exhaust hangers from in front of the muffler and behind the muffler. Be sure to support the exhaust to prevent damage." If the exhaust hangers are stuck or corroded, apply penetrating oil and allow time for it to soak. If the exhaust still cannot be lowered safely, consult a professional mechanic or installer.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
On Sale Today
Original price was $272.50. Current price is $172.73.You save $99.77 (37%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Aug 28 - Mon, Aug 31
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$134.54$137.05
Matt
Ordered online. Shipment arrived on time and with all the correct parts. Great customer service and friendly staff. Also, pricing was great!
May 22, 2023
