Draw-Tite Hardware Kit For Class 4 Trailer Hitch, 2 Inch 76477 For 2011-2022 Volkswagen Amarok Draw-tite$55.49Out of Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.
2011 - 2022 Volkswagen Amarok
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
DRAW-TITE Class 4 trailer hitches are the perfect mix of style and stability for those times when youre working on a home project or heading out on an adventure. This DRAW-TITE Class 4 receiver hitch is rated for up to 7,500 lbs. gross trailer weight (GTW) and up to 750 lbs. tongue weight (TW). No weight distribution kits can be used on this specific trailer hitch. DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 4 trailer hitch has a 2 inch square receiver tube opening so you can easily attach accessories like a bike rack or cargo carrier, or a utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 76477 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 15 LBS |
| GROSS TOWING WEIGHT: | 7,500 LBS. |
| GROSS TONGUE WEIGHT: | 750 LBS. |
| RECEIVER SIZE: | 2 IN. |
| HITCH CLASS: | IV |
| DRILLING REQUIRED: | NO |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | CONCEALED |
| CROSS-TUBE TYPE: | SQUARE TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |
Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Experts available to answer your questions
Call 888-634-9494Lifetime
Equip your vehicle for towing and hitch-mounted accessories with a dependable CURT 2" trailer hitch. Designed for a vehicle-specific fit, CURT receiver hitches provide a strong and secure connection point for towing trailers, carrying bikes, transporting cargo and using other compatible 2-inch hitch accessories.
Our selection of CURT 2-inch receiver hitches includes options for trucks, SUVs, crossovers, vans and passenger vehicles. Each hitch is engineered to match specific vehicle mounting points, helping provide a clean installation and dependable performance. Depending on the vehicle application, available options may include Class 3, Class 4 and heavy-duty receiver hitches with different gross trailer weight and tongue weight capacities.
A 2" x 2" receiver opening is one of the most common hitch sizes and works with a wide range of towing accessories, including ball mounts, bike racks, cargo carriers, hitch steps and tow hooks. When towing a trailer, you may also need a properly rated trailer ball, hitch pin, wiring harness, brake controller or weight distribution system.
CURT trailer hitches feature a durable black finish designed to help protect against rust, scratches and exposure to road conditions. Many models install using existing holes in the vehicle frame, although drilling, trimming or temporary removal of vehicle components may be required for certain applications.
Use our vehicle fitment tools to find the correct CURT 2" trailer hitch for your year, make and model. Always compare the hitch rating with your vehicle’s towing capacity and the ratings of every component in your towing setup. The maximum towing capacity is determined by the lowest-rated component.
Shop CURT 2-inch trailer hitches at TowUniverse for vehicle-specific fitment, trusted towing performance and access to the accessories needed to complete your towing setup.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2011 - 2022 | Volkswagen Amarok | Class 4 Trailer Hitch: 7500 lbs 750/7,500 lbs. Weight Carrying (tongue weight/gross trailer weight) Uses all existing holes. No Drilling required Install Time is 15 minutes |
The Draw-tite Class 4 Trailer Hitch, 2" Square Receiver, Black for Select Volkswagen Amarok 76477 (Part #DT76477) fits the following vehicles: 2011-2022 Volkswagen Amarok. Always verify your specific year, make, and model before ordering.
Yes, the Draw-tite Class 4 Trailer Hitch, 2" Square Receiver, Black for Select Volkswagen Amarok 76477 (Part #DT76477) is designed to fit the 2011-2022 Volkswagen Amarok.
The Draw-tite Class 4 Trailer Hitch, 2" Square Receiver, Black for Select Volkswagen Amarok 76477 (Part #DT76477) fits 2011-2022 Volkswagen Amarok models. The 2022 model year is the last year covered by this part number. For newer models, check for an updated version.
The Draw-tite Class 4 Trailer Hitch, 2" Square Receiver, Black for Select Volkswagen Amarok 76477 (Part #DT76477) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the 76477 hitch is designed for 2010-2021 Volkswagen Amarok models. However, the manual recommends visiting the website for the most up-to-date information regarding specific application years and trim levels, as fitment may vary.
The 76477 is a weight-carrying hitch with a maximum gross trailer weight of 7500 lb (3402 kg) and a maximum tongue weight of 750 lb (340 kg). However, you must not exceed the lower of your towing vehicle manufacturer's rating or these limits.
You will need: a ratchet, a torque wrench, safety glasses, a 19 mm socket, a 6 inch socket extension, and a wire brush. The manual recommends professional installation if you are not comfortable performing the installation yourself.
The fastener kit 76477F includes four M12-1.5 x 45 GR 10.9 bolts. These bolts attach the hitch to the vehicle's bumper beam weldnuts.
Installation involves three steps: (1) Clean the bumper beam weldnuts using a wire brush to remove dirt or rust. (2) Raise the hitch into position and feed the four M12 bolts through the hitch holes and into the weldnuts of the bumper beam. (3) Tighten all M12-1.5 x 45 GR 10.9 fasteners with a torque wrench to 92 Ft.Lb. (125 N*M). Professional installation is recommended if you are not comfortable performing this yourself.
All M12-1.5 x 45 GR 10.9 fasteners must be tightened to 92 Ft.Lb. (125 N*M) using a torque wrench. Proper torque is essential to keep the hitch securely mounted to the vehicle when towing.
If excess sway occurs, take your foot off the gas pedal and hold the steering wheel as steady as possible. Do not apply your brakes and do not speed up. Reduce speed and maintain control of the vehicle.
No. The manual explicitly states: DO NOT cut, weld or modify this receiver. Modifications could compromise the structural integrity and safety of the hitch.
You should check the hitch frequently to ensure all fasteners and the ball are properly tightened. The manual emphasizes periodic inspection to maintain secure mounting during towing.
The maximum tongue weight is 750 lb (340 kg). You must not exceed this limit or the lower of your towing vehicle manufacturer's rating.
A hitch or ball which has been damaged should be removed and replaced immediately. Do not continue to use a damaged hitch, as it may fail during towing.
If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes. This protects the vehicle's interior and prevents corrosion.
Load the trailer heavier in front. This helps maintain proper weight distribution and improves towing stability.
Always wear safety glasses when installing the hitch. Observe safety precautions when working beneath a vehicle. Do not cut access or attachment holes with a torch. These precautions protect you from injury during installation.
Yes, the 76477 is designed for 2010-2021 Volkswagen Amarok. Check the manufacturer's website for the most current fitment information for your specific trim level.
Maximum gross trailer weight is 7500 lb (3402 kg) and maximum tongue weight is 750 lb (340 kg), but do not exceed your vehicle manufacturer's rating.
You need a ratchet, torque wrench, safety glasses, 19 mm socket, 6 inch socket extension, and wire brush. Professional installation is recommended if you are not comfortable.
Tighten all M12-1.5 x 45 GR 10.9 bolts to 92 Ft.Lb. (125 N*M) using a torque wrench.
Installation takes approximately 20 minutes for professional installers. The manual recommends professional installation if you are not comfortable performing it yourself. Contact a professional installer if needed.
No. Do not cut, weld, or modify this receiver. Modifications will compromise safety and void the warranty.
Yes, a compatible bike rack, cargo carrier or other accessory with a 2" x 2" shank can generally be used. Make sure the accessory does not exceed the hitch’s tongue weight rating, the vehicle’s limits or the accessory manufacturer’s capacity. Account for the combined weight of the carrier and everything loaded onto it.
Ann
The staff was able to quickly assist me with locating the correct product I needed. Shipping was really fast. Item arrived in 2 days. Will be using TowUniverse again!!
May 22, 2023
On Sale Today
Original price was $225.00. Current price is $145.19.You save $79.81 (35%)
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Aug 16 - Wed, Aug 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$134.54$137.05