Our in-house experts typically reply within one business day.
Luverne
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Get the job done right with LUVERNE Grip Step 7" running boards. These roughneck truck side steps feature a unique expanded metal tread pattern for superior traction and a 7" width for reliable footing. They are built from aluminum alloy for exceptional, rust-free strength, and they are simple to install using high-strength vehicle-specific brackets. The rugged, expanded metal tread and angular design of Grip Step running boards truly makes them a side accessory fit for your work truck or commercial van. No matter the season, the superior traction of Grip Steps locks onto the bottom of your boots and provides safe vehicle entry and exit. Because they boast an impressive 7" width, the side steps are as comfortable as they are skid-resistant. We know the job doesn't make exceptions to keep your vehicle looking pretty, and that is why Grip Step running boards are made from aluminum and shielded in a tough powder coat finish. We use a 5052 aluminum alloy to provide maximum strength and unstoppable rust resistance. To finish things off and add a professional touch, we also apply a durable textured black powder coat and contoured black plastic end caps to further protect against dirt, moisture and other threats on the job. To make installation as simple as possible, Grip Step 7" running boards are each designed for a custom-fit installation, using vehicle-specific mounting brackets. The brackets are covered in a durable black powder coat finish and bolt onto the boards using stainless steel fasteners for long-lasting strength. This particular set of Grip Step running boards is designed to fit specific years of the Ford F150 (see application info to verify fitment). These running boards come with brackets, but the brackets are shipped separately.
Grip Step running boards are designed to be the best running boards for work trucks, featuring a unique expanded metal tread pattern for superior traction and a 7" width for reliable footing.
LUVERNE has manufactured truck accessories in the United States since 1963, specialising in grille guards, running boards, side steps and mud guards for pickups, commercial vans and SUVs. Products are built primarily from stainless steel, aluminium and mild steel, with model-specific mounting kits that use existing frame locations for a bolt-on installation.
LUVERNE has been manufacturing automotive accessories in the United States since 1963, and six decades of continuous production have made it a nationally recognised name in the truck accessory market. Now a Lippert brand, it concentrates on a defined set of products rather than spreading across the whole aftermarket: front-end protection, step access and spray protection for pickup trucks, commercial vans and sport utility vehicles.
Step products are the largest part of the catalog and the range is unusually deep, because the right step depends on the vehicle's ride height, the width of the rocker panel and how often people get in and out. The O-Mega II six-inch oval steps give a wide, flat standing surface in polished stainless or black powder coat, while the Regal 7 seven-inch oval steps go wider still for full-size crew cabs and lifted trucks. The broader running board and side bar range covers round tube, oval and boxed profiles across cab configurations, with treads positioned at the door openings where they are used.
Grille guards protect the front end against impacts, brush and road debris, built in tubular stainless or steel with model-specific brackets that tie into factory frame mounting points. Because the fit is engineered per vehicle, installation is a bolt-on job that does not require drilling or cutting on most applications.
Rounding out the line, LUVERNE mud guards and mud flaps shield rocker panels, paint and following vehicles from stones and road spray, in widths matched to the tyre and fender they sit behind. Material choice runs through everything the brand does: stainless steel where appearance and corrosion resistance matter most, aluminium where weight is the priority, and mild steel with protective coating where strength and value lead. Customers include contractors, fleet operators, van upfitters and truck owners.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
1 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2015 - 2026 | Ford F-150 | Standard Cab Pickup | — |
The LUVERNE Grip Step 7" x 60" Black Aluminum Running Boards, Select Ford F-150 415060-401521 (Part #FTNF415060-401521) fits the following vehicles: 2015-2026 Ford F-150. Always verify your specific year, make, and model before ordering.
The LUVERNE Grip Step 7" x 60" Black Aluminum Running Boards, Select Ford F-150 415060-401521 (Part #FTNF415060-401521) fits 2015-2026 Ford F-150 models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the LUVERNE Grip Step 7" x 60" Black Aluminum Running Boards, Select Ford F-150 415060-401521 (Part #FTNF415060-401521) is designed to fit the 2015-2026 Ford F-150.
The LUVERNE Grip Step 7" x 60" Black Aluminum Running Boards, Select Ford F-150 415060-401521 (Part #FTNF415060-401521) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes, the CURT 401521 GRIP STEP BRACKETS are designed for 2015 and newer Ford F150 Regular Cab pickups. This is a rocker panel mount, no-drill application that uses factory-provided studs on the inside of the rocker panel.
The manual specifies the 401521 is designed for Regular Cab pickups only. Fitment on SuperCrew or SuperCab models is not confirmed in the manual and should be verified with the manufacturer or a fitment database before purchase.
No. The 401521 is a no-drill application. Installation uses factory-provided studs on the inside of the rocker panel, so no drilling, cutting, or permanent modifications to the vehicle are required.
The kit includes: 4 mounting brackets (part 552845), 8 nylon isolator washers 0.36" × 1.5" × 0.032" (part 108442), and 8 M8-1.25 flange nuts zinc-plated (part 105859). The step board assembly is ordered separately and includes its own installation instructions.
The step board assembly is not included with the brackets. You must order the step board separately. Once you have both the brackets and step board, follow the separate instruction sheet included with the step board assembly to attach it to the brackets.
The manual does not specify which tools are required for installation. Contact the manufacturer or your installer to confirm what tools (such as wrenches or sockets for the M8-1.25 flange nuts) are needed.
On the left side, install two 1.5" isolator washers (part 108442), the step mounting bracket (part 552845), and two M8-1.25 flange nuts (part 105859) on the factory-provided studs on the inside of the rocker panel. Repeat this assembly for the remaining brackets on the left side. Check that all brackets are level, then tighten all flange nuts.
The service parts list shows 4 mounting brackets total (part 552845). The manual instructs you to install brackets on the left side, then repeat the process for the right side, but does not explicitly state how many brackets go on each side. Refer to Figure 1 or contact the manufacturer to confirm the exact layout.
The correct order from the stud outward is: isolator washer (part 108442), mounting bracket (part 552845), then flange nut (part 105859). Use two washers and two nuts per bracket.
Yes. Before tightening all flange nuts, check that all brackets are level. This ensures proper alignment and function of the step assembly.
The manual does not provide a torque specification for the M8-1.25 flange nuts. Contact the manufacturer or your installer for the correct torque value to ensure proper fastening.
The isolator washers (part 108442) are 0.36" × 1.5" × 0.032" and are black nylon. Eight washers are included in the kit (two per bracket).
Yes. The 401521 GRIP STEP BRACKETS are designed for 2015 and newer Ford F150 Regular Cab pickups with factory rocker panel studs.
No. This is a no-drill application that uses factory-provided studs on the rocker panel.
The kit includes 8 nylon isolator washers (0.36" × 1.5" × 0.032") and 8 M8-1.25 zinc-plated flange nuts. The step board is ordered separately.
Yes. The step board assembly is ordered separately and includes its own instruction sheet for mounting to the brackets.
On Sale Today
Original price was $465.95. Current price is $408.95.You save $57.00 (12%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Aug 24 - Thu, Aug 27
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
