Our in-house experts typically reply within one business day.
Luverne
Verify Fitment
Select your vehicle to confirm this part fits.
2001 - 2019, 2021 - 2026 Ford E-350 Super Duty
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
LUVERNE Grip Step 7" running boards for vans are the ideal work van accessories, adding safe, dependable footing to your cargo van with a vehicle-specific fit. Grip Step van steps are equipped with high-traction treads for fleet-approved safety, and they are made from powder-coated aluminum to be lightweight and provide long-lasting resistance to the elements. All Grip Step running boards are engineered for vehicle-specific installation. These van steps offer a custom fit for certain years and styles of the Ford E150, E150 Econoline, E250, E250 Econoline and E350 Super Duty (see application info to verify fitment with your cargo van). They come with two longer steps, one for the driver-side door and one for the passenger-side door. They also come with powder-coated steel brackets and stainless steel hardware for a complete install. Grip Step running boards for vans are optimized for delivery trucks, construction vehicles and other commercial vans. They feature a 7" width, covered with expanded metal treads to grip the bottom of your boots for safe entry and exit every time. The metal treads are also highly resistant to wear, and they help keep the steps clean with their open, through-hole design. The aluminum construction of LUVERNE Grip Step running boards makes them strong for a rigid step, but lightweight for optimized fuel efficiency. Aluminum is also highly corrosion-resistant. To maximize corrosion resistance, Grip Step van steps are shielded in a textured black powder coat finish. This gives them an impervious layer of protection against the elements and resists chipping and UV damage. The black running boards also complement the look and style of your cargo van, adding a professional finishing touch. To complete the look, we also offer rear Grip Step van steps, providing safe, convenient access to the rear cargo area.
Grip Step van running boards are designed to be the best running boards for work vans and cargo vans, featuring a unique expanded metal tread pattern for superior traction and a 7" width for reliable footing.
LUVERNE has manufactured truck accessories in the United States since 1963, specialising in grille guards, running boards, side steps and mud guards for pickups, commercial vans and SUVs. Products are built primarily from stainless steel, aluminium and mild steel, with model-specific mounting kits that use existing frame locations for a bolt-on installation.
LUVERNE has been manufacturing automotive accessories in the United States since 1963, and six decades of continuous production have made it a nationally recognised name in the truck accessory market. Now a Lippert brand, it concentrates on a defined set of products rather than spreading across the whole aftermarket: front-end protection, step access and spray protection for pickup trucks, commercial vans and sport utility vehicles.
Step products are the largest part of the catalog and the range is unusually deep, because the right step depends on the vehicle's ride height, the width of the rocker panel and how often people get in and out. The O-Mega II six-inch oval steps give a wide, flat standing surface in polished stainless or black powder coat, while the Regal 7 seven-inch oval steps go wider still for full-size crew cabs and lifted trucks. The broader running board and side bar range covers round tube, oval and boxed profiles across cab configurations, with treads positioned at the door openings where they are used.
Grille guards protect the front end against impacts, brush and road debris, built in tubular stainless or steel with model-specific brackets that tie into factory frame mounting points. Because the fit is engineered per vehicle, installation is a bolt-on job that does not require drilling or cutting on most applications.
Rounding out the line, LUVERNE mud guards and mud flaps shield rocker panels, paint and following vehicles from stones and road spray, in widths matched to the tyre and fender they sit behind. Material choice runs through everything the brand does: stainless steel where appearance and corrosion resistance matter most, aluminium where weight is the priority, and mild steel with protective coating where strength and value lead. Customers include contractors, fleet operators, van upfitters and truck owners.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
5 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2003 - 2014 | Ford E-150 | Excluding E-Series vans with rear air conditioner |
| 2001 - 2002 | Ford E-150 Econoline | Excluding E-Series vans with rear air conditioner |
| 2003 - 2014 | Ford E-250 | Excluding E-Series vans with rear air conditioner |
| 2001 - 2002 | Ford E-250 Econoline | Excluding E-Series vans with rear air conditioner |
| 2001 - 2019, 2021 - 2026 | Ford E-350 Super Duty | Excluding E-Series vans with rear air conditioner |
The LUVERNE Grip Step 7" x 98" Black Aluminum Running Boards, Select Ford E-Series 415098-570125 (Part #FTNF415098-570125) fits the following vehicles: 2003-2014 Ford E-150; 2001-2002 Ford E-150 Econoline; 2003-2014 Ford E-250; 2001-2002 Ford E-250 Econoline; 2001-2026 Ford E-350 Super Duty. Always verify your specific year, make, and model before ordering.
Yes, the LUVERNE Grip Step 7" x 98" Black Aluminum Running Boards, Select Ford E-Series 415098-570125 (Part #FTNF415098-570125) is designed to fit the 2003-2014 Ford E-150.
The LUVERNE Grip Step 7" x 98" Black Aluminum Running Boards, Select Ford E-Series 415098-570125 (Part #FTNF415098-570125) fits 2003-2014 Ford E-150 models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The LUVERNE Grip Step 7" x 98" Black Aluminum Running Boards, Select Ford E-Series 415098-570125 (Part #FTNF415098-570125) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The GRIP STEPS model 415114 is a universal step board assembly made of aluminum extrusion (part 551388, 113.62" long). It can be cut to custom lengths using a saber saw, chop saw, or hack saw to fit various vehicle applications. The board includes support braces, end caps, and fasteners for mounting to vehicle brackets.
The MEGA STEPS model 570125 is a step assembly designed specifically for 2001 and newer Ford vans. It is a 98.00" step assembly (part 575098) that mounts to the vehicle's quarter panel and pinch weld using multiple brackets, U-nuts, bolts, and screws.
The GRIP STEPS model 415114 is listed as a universal application, meaning it can be adapted to fit many vehicles. However, you must follow the instructions included with the specific bracket package for your vehicle, as the brackets are vehicle-specific. The step board itself can be cut to the required length for your application.
The MEGA STEPS model 570125 is designed for 2001 and newer Ford vans only. It is not compatible with other vehicle makes or model years.
To install the GRIP STEPS model 415114, you will need: a saber saw, chop saw, or hack saw to cut the board to length; flat black paint to touch up the cut ends; and standard hand tools to install fasteners (screwdriver for self-drilling tek screws and wrench or socket for carriage bolts and nuts). The specific bracket package may require additional tools.
To install the MEGA STEPS model 570125, you will need: a drill with bits for Ø11/32" and Ø17/64" holes; wrenches or sockets for 5/16-18 hex bolts and nuts; and a torque wrench calibrated to 19 foot pounds. A clamp may be helpful to hold brackets in position while drilling.
Most fasteners are included with the GRIP STEPS model 415114: #8 x 1/2" self-drilling tek screws (item #8), 5/16-18 x 1" carriage bolts (item #5), washers (item #6), and flange nuts (item #7). However, the manual notes that some flange nuts are supplied in the specific bracket package, not the step package, so verify all fasteners are present before starting installation.
Yes, all fasteners are included with the MEGA STEPS model 570125: 5/16-18 x 1" hex bolts (item #8), 5/16-18 x 1" square head screws (item #9), 5/16 x 1" washer head screws (item #10), 5/16-18 multi-thread U-nuts (items #11 and #12), serrated flange nuts (items #13 and #14), flat washers (item #15), and lock washers (item #16). Verify all parts are present before starting installation.
Before installing the GRIP STEPS model 415114, read the complete instructions and verify that all required parts listed in the service parts list are on hand. Determine the required length for your application and prepare to cut the board. Follow the instructions included with your specific bracket package to understand how the brackets mount to your vehicle.
Before installing the MEGA STEPS model 570125, read the complete instructions and verify that all required parts are on hand. On the passenger side of the vehicle, remove the tape covering the mounting holes in the inside quarter panel (five locations). This exposes the holes where U-nuts will be installed.
Determine the required length for your application, then cut the aluminum extrusion board using a saber saw, chop saw, or hack saw. After cutting, use flat black paint to touch up the cut ends to prevent corrosion and maintain appearance.
1. Slide the appropriate number of support braces (item #2) into the channel of the step board (item #1). 2. Slide the end caps (item #3) over the front and rear of the step. 3. Attach the end caps to the bottom of the step using #8 x 1/2" self-drilling tek screws (item #8). 4. Set the assembled step on the mounting brackets. 5. Slide each support brace over the top of each mounting bracket. 6. Attach the flat spacer plate (item #4) between the support brace and the top of the mounting bracket. 7. Secure with 5/16-18 x 1" carriage bolts, washers, and flange nuts (items #5, #6, #7).
1. Remove tape from mounting holes in the inside quarter panel (passenger side). 2. Install short 5/16-18" multi-thread U-nuts (item #11) in holes 1, 3, 4, and 5 from the front; install long U-nut (item #12) in hole 2. 3. Install front, center, and rear mounting brackets using hex bolts, flat washers, and lock washers into the U-nuts (finger-tighten only). 4. Install bolts through the lower pinch weld with serrated flange nuts (finger-tighten only). 5. Tighten front brackets against the vehicle surface and tighten the pinch weld bolt. 6. Install five square head screws in the front track of the step plate. 7. Position the step on the brackets with screws in the slots, centered front to rear. 8. Install serrated flange nuts on the square head screws (finger-tighten only). 9. Align the step plate with the bottom of the body sheet metal. 10. Tighten all fasteners to 19 foot pounds. 11. Mount front brackets on the driver's side the same way. 12-16. Mount the remaining rear brackets, drill Ø11/32" holes through the pinch weld, install bolts, drill Ø17/64" holes through the inside body panel, and install washer head screws.
The MEGA STEPS model 570125 requires finger-tightening in stages to allow for proper alignment and positioning. The step must be centered front to rear on the vehicle, and the mounting bracket flanges must be aligned flush with the pinch weld before final torque. Finger-tightening allows adjustment without fully securing the fasteners.
Yes, drilling is required. You must drill two sizes of holes: Ø11/32" holes through the center of the pinch weld (using the bracket holes as a guide), and Ø17/64" holes through the inside body panel (using the top bracket holes as a guide). These holes are necessary to mount the rear brackets to the vehicle.
Yes, the GRIP STEPS model 415114 can be modified from its original length to fit many applications. Cut the aluminum extrusion board to the required length using a saber saw, chop saw, or hack saw. After cutting, touch up the cut ends with flat black paint.
All fasteners on the GRIP STEPS model 415114 must be torqued to 19 LB FT (19 foot pounds). This applies to the 5/16-18 x 1" carriage bolts, washers, and flange nuts that attach the step assembly to the mounting brackets.
All bolts on the MEGA STEPS model 570125 must be torqued to 19 foot pounds. This includes the bolts from the step plate to the frame (step 8) and the body mounting bolts (step 9). All bolts must be torqued after final alignment and positioning.
The GRIP STEPS model 415114 uses 5/16-18 x 1" carriage bolts (part #108683). These bolts are supplied with flat washers (part #101369) and serrated flange nuts (part #102680).
The MEGA STEPS model 570125 uses 5/16-18 x 1" hex bolts (part #106997). These bolts are used with 5/16" flat washers (part #106998) and 5/16" lock washers (part #102668) for mounting brackets to the U-nuts, and with serrated flange nuts (part #106996) for mounting through the pinch weld.
The MEGA STEPS model 570125 uses 5/16-18 x 1" square head screws (part #106880). Five screws are installed in the front track of the step plate, and four screws are in the back channel (with only one screw used in the center bracket).
The MEGA STEPS model 570125 uses two types of 5/16-18 multi-thread U-nuts: short U-nuts (part #104264, qty 5) installed in holes 1, 3, 4, and 5 from the front, and long U-nuts (part #105541, qty 2) installed in hole 2 from the front. The U-nuts are installed in the rectangular and round holes in the inside quarter panel.
The GRIP STEPS model 415114 uses #8 x 1/2" self-drilling tek screws (part #107958) to attach the end caps to the bottom of the step board. Eight screws are supplied.
The MEGA STEPS model 570125 uses 5/16 x 1" washer head screws (part #105537) with 5/16" flat washers (part #106998) and 5/16" lock washers (part #102668). Three screws are supplied and installed through the top holes in the brackets into the inside body panel.
Two hole sizes must be drilled for the MEGA STEPS model 570125: Ø11/32" holes through the center of the pinch weld (for mounting brackets), and Ø17/64" holes through the inside body panel (for washer head screws). The bracket holes serve as guides for drilling.
After installing the MEGA STEPS model 570125, verify that: the step plate is aligned with the bottom of the body sheet metal; the bottom edge of the mounting bracket flanges is even with the bottom edge of the pinch weld on the vehicle; and the step is centered front to rear on the vehicle. Make these adjustments before final torque.
After installing the GRIP STEPS model 415114, verify that the step is positioned correctly on the mounting brackets and that all fasteners are torqued to 19 LB FT. Ensure the end caps are securely attached and the step is level and secure before use.
The GRIP STEPS model 415114 is a universal step that can be adapted to fit many vehicles by cutting the board to the required length. You must use the bracket package designed for your specific vehicle. Consult the bracket package instructions for fitment details.
The MEGA STEPS model 570125 is designed for 2001 and newer Ford vans only. If your van is a 2001 or newer Ford van, it should fit. If your van is a different make or model year, this product is not compatible.
Most fasteners are included, but verify that all parts in the service parts list are present before starting. Some flange nuts may be supplied in your specific bracket package rather than the step package.
No, all fasteners are included with the MEGA STEPS model 570125. Verify that all parts listed in the service parts list are present before starting installation.
No drilling is required for the GRIP STEPS model 415114. However, you must cut the aluminum board to the correct length using a saber saw, chop saw, or hack saw, and touch up the cut ends with flat black paint.
Torque all fasteners to 19 LB FT (19 foot pounds). This applies to the carriage bolts, washers, and flange nuts that attach the step to the mounting brackets.
Torque all bolts to 19 foot pounds. This includes the bolts from the step plate to the frame and the body mounting bolts. Finger-tighten all fasteners first, then align the step, and finally torque to 19 foot pounds.
Read the complete instructions and verify that all required parts listed in the service parts list are on hand. Follow the instructions included with your specific bracket package to understand how to mount the brackets to your vehicle.
Read the complete instructions and verify that all required parts are on hand. Remove the tape covering the mounting holes in the inside quarter panel on the passenger side of the vehicle.
On Sale Today
Original price was $962.95. Current price is $844.95.You save $118.00 (12%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Aug 26 - Sat, Aug 29
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
