Ask a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
Reese
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Regardless of how far youre planning to travel, be it across town or across the country, youll need to be sure you have your safety chains from REESE securely in place. Safety chains - which are required by law - are usually link chains that connect the rear of your tow vehicle to the front of your trailer. As their name states, these chains are a safety measure when towing, adding an extra layer of connection protection in case your trailer should become uncoupled from your towing setup. With REESE safety chains, you can tow with confidence, knowing your towing setup is protected against the what ifs. REESE, making the journey as enjoyable as the destination.
| BRAND: | REESE |
| PART NUMBER: | 49150 |
| WARRANTY: | LIMITED 1 YEAR WARRANTY |
| WEIGHT: | 9.9 LBS |
| LENGTH: | 44 IN. |
| COLOR: | SILVER |
| DIAMETER: | 0.3125 IN. |
| FINISH: | YELLOW ZINC |
| CAPACITY: | 16,000 LBS. |
Reese has designed towing equipment since 1952 and remains a benchmark for heavy-duty towing. The line covers fifth wheel hitches such as the modular M5, gooseneck couplers including the Goose Box, air-ride and short-bed pin boxes, weight distribution systems with active sway control, and the accessories that connect them, all built to exceed published industry standards.
Reese has been pioneering towing performance since 1952, when Margaret Reese asked her husband TJ to stop travel trailers rocking every time somebody walked through them. His answer, the first pair of stabilising jacks, was simple and effective enough to change the RV industry. From that starting point Reese grew into a designer and manufacturer of complete towing systems, and today it anchors the heavy-duty end of the Horizon Global towing portfolio.
Fifth wheel towing is where the brand's engineering is most visible. The M5 fifth wheel hitch uses a modular design that breaks into manageable sections for assembly, with a wider stance, tighter tolerances and a shock absorption system aimed at the jolts that travel up through a truck bed. For owners who would rather tow from a gooseneck coupler and keep the bed clear, the Goose Box 20K replaces the trailer's king pin with a gooseneck connection carrying its own air-ride cushioning.
Pin boxes are a Reese speciality. The 5th Airborne uses air-ride technology to dampen road shock and reduce the chucking motion that makes fifth wheel towing tiring, while the Sidewinder was designed for short-bed pickups, pivoting the connection point so the trailer can turn sharply without the front cap meeting the cab.
For conventional towing, Reese weight distribution systems restore load to the tow vehicle's front axle and control sway. The Pro Round Bar distributes weight evenly while damping sway, and the Pro Dual Cam II uses active cam-based sway control that works harder the stronger the sway force becomes. Complete kits pair bars, head and shank to a rated tongue weight, and dedicated sway control kits can be added to existing setups. The products suit RV owners, horse and livestock haulers and anyone towing near the upper end of a vehicle's rating.
Experts available to answer your questions
Call 888-634-94941 Year
The kit includes one goose box (model 94716 or 94622), two 44" chains with hooks, two ½" flat washers, two ½" nuts, two ½"-13x2.25 bolts, and two ½" lockwashers. All fasteners needed for installation are included in fastener kit 49150F.
The maximum gross trailer weight is 16,000 LB and the maximum pin weight is 3,200 LB. However, you must not exceed the lower of your towing vehicle manufacturer's rating, your trailer manufacturer's rating, or these maximum weights.
You will need 3/4" wrenches, a 3/4" socket, and a torque wrench. No drill bits are required. The fastener kit 49150F is also required.
No, drilling is not required. The kit mounts to existing safety chain mounting lugs on the underside of the goose box.
Tighten each bolt to 110 foot-pounds (Ft. Lbs.) using a torque wrench.
1. Locate the safety chain mounting lugs on the underside of the goose box. 2. Place a flat washer onto a bolt and insert it through the last link in the chain. 3. Insert the bolt, washer, and chain assembly through the hole in the mounting lug. 4. Secure with a hex nut and lockwasher. 5. Tighten to 110 foot-pounds. Repeat for the second chain.
Do not exceed your towing vehicle manufacturer's recommended towing capacity. Failure to follow installation and use instructions may cause property damage, injury, or death.
The kit is covered by a limited five-year warranty from the original consumer purchaser. The warranty covers material defects in material and workmanship, excluding normal wear and tear. Installation and use must be in accordance with the product instructions. The warranty does not cover damage from abuse, neglect, misuse, accidents, misapplication, overloading, improper installation, improper maintenance, or unauthorized alterations.
The kit fits goose boxes with model numbers 94716 or 94622 and is rated for trailers up to 16,000 LB gross weight and 3,200 LB pin weight. You must not exceed your towing vehicle or trailer manufacturer's rating. Consult your goose box documentation to confirm compatibility.
All fasteners are included: two ½"-13x2.25 bolts, two ½" flat washers, two ½" lockwashers, and two ½" nuts. These are supplied in fastener kit 49150F.
No, drilling is not required. The chains mount to existing safety chain mounting lugs on the underside of the goose box using bolts, washers, and nuts.
Tighten each bolt to 110 foot-pounds using a torque wrench.
Maximum gross trailer weight is 16,000 LB and maximum pin weight is 3,200 LB, but you must not exceed your towing vehicle or trailer manufacturer's rating, whichever is lower.
| Part Number | Description | Capacity (lbs.) |
|---|---|---|
| 94920 | Goose Box For Lippert #0115, #0719, #1116, #1716, #1821HD, #1710, Rhino Series Wing Sets | 20,000 |
| 94980 | Goose Box For Lippert #0719, #1621, #1716, Rhino Series Wing Sets | 22,000 |
| Accessory Parts | ||
| 49150 | Safety Chain Kit, Contains: (2) Grade 70, 5/16 in. x 44 in. with 5/16 in. Clevis Hook and Mounting Hardware | 16,000 |
| 49151 | Safety Chain Kit, Contains: (2) Grade 70, 5/16 in. x 44 in. with 5/16 in. Clevis Hook and Mounting Hardware | 20,000 |
| 61301 | Spacer Kit | |
| Replacement Part | ||
| 86007 | Air System Service Kit | |
Jennifer
The staff was able to quickly assist me with locating the correct product I needed. Shipping was really fast. Item arrived in 2 days. Will be using TowUniverse again!!
May 22, 2023
Free Shipping
Ships free on all orders
Authorized Dealer
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 2 - Sat, Sep 5
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
