UWS Bright Aluminum 60" Crossover Truck Tool Box TBS-60UWSOriginal price was $695.95. Current price is $631.95.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
2009 - 2010 Hummer H3T
Confirmed to Fit
Always the correct part
We know our products
Always the correct part
We know our products
Quality Products
Free Shipping!
Quality Products
Free Shipping!
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: BRIGHT ALUMINUM
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. This particular tool box features a gull wing top with two lockable, key-operated lids, providing convenient half-box access from either the driver side or passenger side of the truck. To give the lids reliable strength, they feature our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases structural integrity to prevent bending and warping and to ensure smooth opening and closing. The lids also feature self-opening struts to make it easy to open the tool box when your hands are full. To keep out moisture, dirt and even insects, each lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
19 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2023 - 2026 | Chevrolet Colorado | Crew Cab Pickup | 5'2" Bed | — |
| 2001 - 2004 | Chevrolet S10 | Crew Cab Pickup | 4'7" Bed | — |
| 1994 - 2003 | Chevrolet S10 | Extended Cab Pickup | 6'1" Bed | — |
| 1994 - 2003 | Chevrolet S10 | Standard Cab Pickup | 6'1" Bed | — |
| 1994 - 2003 | Chevrolet S10 | Standard Cab Pickup | 7'5" Bed | — |
| 2023 - 2026 | GMC Canyon | Crew Cab Pickup | 5'2" Bed | — |
| 2001 - 2004 | GMC Sonoma | Crew Cab Pickup | 4'7" Bed | — |
| 1994 - 2003 | GMC Sonoma | Extended Cab Pickup | 6'1" Bed | — |
| 1994 - 2003 | GMC Sonoma | Standard Cab Pickup | 6'1" Bed | — |
| 1994 - 2003 | GMC Sonoma | Standard Cab Pickup | 7'5" Bed | — |
| 2006 - 2014 | Honda Ridgeline | Crew Cab Pickup | 5' Bed | — |
| 2009 - 2010 | Hummer H3T | Crew Cab Pickup | 4'11" Bed | If your model is equipped with a factory track-system, standard box-mounting may not apply. |
| 2003 - 2004 | Mazda B2300 | Extended Cab Pickup | 6' Bed | — |
| 2001 - 2009 | Mazda B2300 | Standard Cab Pickup | 6' Bed | — |
| 1998 - 2000 | Mazda B2500 | Extended Cab Pickup | 6' Bed | — |
| 1998 - 2001 | Mazda B2500 | Standard Cab Pickup | 6' Bed | — |
| 1999 - 2007 | Mazda B3000 | Extended Cab Pickup | 6' Bed | — |
| 1998 - 2007 | Mazda B3000 | Standard Cab Pickup | 6' Bed | — |
| 2000 - 2009 | Mazda B4000 | Extended Cab Pickup | 6' Bed | — |
Yes, the UWS Bright Aluminum 60" Gull Wing Crossover Truck Tool Box TB-60 (Part #BHSGTB-60) is designed to fit the 2023-2026 Chevrolet Colorado.
The UWS Bright Aluminum 60" Gull Wing Crossover Truck Tool Box TB-60 (Part #BHSGTB-60) fits 2023-2026 Chevrolet Colorado models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The UWS Bright Aluminum 60" Gull Wing Crossover Truck Tool Box TB-60 (Part #BHSGTB-60) fits both short bed and long bed configurations. Check the fitment chart for your specific Chevrolet Colorado configuration.
The UWS Bright Aluminum 60" Gull Wing Crossover Truck Tool Box TB-60 (Part #BHSGTB-60) fits the following vehicles: 2023-2026 Chevrolet Colorado; 1994-2004 Chevrolet S10; 2023-2026 GMC Canyon; 1994-2004 GMC Sonoma; 2006-2014 Honda Ridgeline; 2009-2010 Hummer H3T; 2001-2009 Mazda B2300; 1998-2001 Mazda B2500; 1998-2007 Mazda B3000; 2000-2009 Mazda B4000. Always verify your specific year, make, and model before ordering.
The UWS Bright Aluminum 60" Gull Wing Crossover Truck Tool Box TB-60 (Part #BHSGTB-60) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The TB-60 Crossover Truck Tool Box includes: 1 crossover truck tool box, 1 key, 2 rail pads, 2 J-hooks (3"), 2 washers (1/4"), and 2 nuts (1/4"). A divider tray is not included with all models. Check your specific package contents against the parts list.
The manual does not specify which vehicle models, years, bed lengths or cab styles the TB-60 fits. Before purchasing, contact CURT customer support at 877-287-8634 or consult your dealer to confirm fitment for your specific truck.
You will need a ratchet, socket set, and tape measure. The manual rates installation difficulty as Easy.
The manual does not explicitly state whether drilling is required for standard installation. However, it includes a warning to check under your truck before drilling to ensure you do not puncture brake lines, fuel lines, electrical wires, fuel tanks or other components. Contact your dealer or CURT support at 877-287-8634 to confirm whether drilling is needed for your specific truck.
Place the tool box in the truck bed and use a tape measure to ensure it is centered. Open the lid and check that there is clearance between the open lid, the top of the cab, and the back of the cab before securing it. This is done in Step 1 before attaching the rail pads.
The rail pads have an adhesive side. Attach the adhesive side of each rail pad to the underside of the tool box ends. Then place the tool box with the adhered rail pads on top of the truck bed rails.
In Step 2, place a J-hook under the lip of the bed rail and insert the threaded end up through the slot. Use only one hole and J-hook assembly on each side. Attach with a 1/4" washer and 1/4" nut. Snug the hardware but do not fully tighten at first. After re-measuring to ensure the tool box is centered and the lid has clearance, fully tighten all hardware.
According to the manual's general torque guidelines, 1/4" bolts should be torqued to 3 ft-lbs. However, the manual notes that these are general guidelines. If you purchase replacement hardware, use the torque specifications provided with that hardware.
The tool box comes with adjustable strikers. If they become misaligned, simply loosen them, adjust to the correct position, and re-tighten. Periodically lubricate the strikers and locks to ensure optimum performance.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, including containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Danger of explosion.
Yes. The product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product installed.
Never exceed the vehicle manufacturer's recommended capacity. The manual does not specify the tool box's own capacity rating. Contact CURT support at 877-287-8634 or your dealer for the specific capacity of your model.
Use mild automotive detergent to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. Periodically lubricate the strikers and locks to ensure optimum performance.
After installation, ensure all knobs, bolts, screws, straps and locks are firmly secured. Open the tool box lid and verify there is clearance between the open lid, the top of the cab, and the back of the cab. Ensure the tool box is centered in the truck bed. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue.
Before drilling into your truck bed, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, etc. Precaution must be taken that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision. After drilling, treat or seal all fasteners and exposed metal in any holes drilled in the vehicle to prevent corrosion.
No. Do not modify this product. Use it only for the purposes for which it was designed. Consult your dealer if you have any questions regarding the installation, operation, use and limits of the product.
A divider tray is included in the parts list, but the manual states it is not included with all models. Check your specific package contents or contact CURT support at 877-287-8634 to confirm whether your model includes a divider tray.
The manual does not specify vehicle models or bed lengths. Contact CURT at 877-287-8634 or your dealer to confirm fitment for your truck.
You need a ratchet, socket set, and tape measure. Installation is rated Easy.
The manual does not explicitly state whether drilling is required. Before any drilling, check under your truck to avoid puncturing brake lines, fuel lines, electrical wires or fuel tanks. Contact CURT support at 877-287-8634 to confirm for your truck.
Torque 1/4" bolts to 3 ft-lbs. according to the manual's general guidelines. If you purchase replacement hardware, use the torque specifications provided with that hardware.
Do not store flammables, explosives, hazardous materials, gasoline, solvents, propane tanks, acetylene tanks or cutting torches. Never exceed your vehicle manufacturer's recommended capacity.
Clean with mild automotive detergent only; do not use abrasive cleaners or wire brushes. Periodically re-tighten all fasteners and inspect for wear and corrosion. Lubricate strikers and locks regularly.
On Sale Today
Original price was $747.95. Current price is $678.95.You save $69.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Wed, Aug 26 - Fri, Aug 28
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.