UWS Gloss Black 69" Deep Slim Truck Tool Box, Low Profile TBSD-69-SL-LP-BUWSOriginal price was $852.95. Current price is $774.95.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
UWS
Verify Fitment
Select your vehicle to confirm this part fits.
2009 - 2010 Dodge Ram 1500
Confirmed to Fit
2009 - 2010 Dodge Ram 1500
Confirmed to Fit
2019 - 2026 Ram 1500
Confirmed to Fit
2019 - 2026 Ram 1500
Confirmed to Fit
2019 - 2026 Ram 1500
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: GLOSS BLACK POWDER COAT
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability. UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent b ending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
UWS | Tough. Reliable.
21 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2019 - 2026 | Chevrolet Silverado 1500 | Crew Cab Pickup | 5'10" Bed | — |
| 2004 - 2018 | Chevrolet Silverado 1500 | Crew Cab Pickup | 5'9" Bed | — |
| 2007 | Chevrolet Silverado 1500 Classic | Crew Cab Pickup | 5'9" Bed | — |
| 2022 | Chevrolet Silverado 1500 LTD | Crew Cab Pickup | 5'10" Bed | — |
| 2009 - 2010 | Dodge Ram 1500 | Crew Cab Pickup | 5'7" Bed | If your model is equipped with a RamBox, a crossover tool box will not fit. |
| 2009 - 2010 | Dodge Ram 1500 | Extended Cab Pickup | 5'7" Bed | If your model is equipped with a RamBox, a crossover tool box will not fit. |
| 2009 - 2010 | Dodge Ram 1500 | Standard Cab Pickup | 5'7" Bed | — |
| 2004 - 2008 | Dodge Ram 1500 | Crew Cab Pickup | 6'4" Bed | — |
| 2002 - 2003 | Dodge Ram 1500 | Crew Cab Pickup | 6'6" Bed | — |
| 2011 - 2016 | Ford F-250 Super Duty | Crew Cab Pickup | 6'10" Bed | — |
| 2011 - 2016 | Ford F-250 Super Duty | Extended Cab Pickup | 6'10" Bed | — |
| 2011 - 2016 | Ford F-250 Super Duty | Standard Cab Pickup | 6'10" Bed | — |
| 2011 - 2016 | Ford F-350 Super Duty | Crew Cab Pickup | 6'10" Bed | — |
| 2011 - 2016 | Ford F-350 Super Duty | Extended Cab Pickup | 6'10" Bed | — |
| 2011 - 2016 | Ford F-350 Super Duty | Standard Cab Pickup | 6'10" Bed | — |
| 2004 - 2013 | GMC Sierra 1500 | Crew Cab Pickup | 5'9" Bed | — |
| 2007 | GMC Sierra 1500 Classic | Crew Cab Pickup | 5'9" Bed | — |
| 2022 | GMC Sierra 1500 Limited | Crew Cab Pickup | 5'10" Bed | — |
| 2019 - 2026 | Ram 1500 | Crew Cab Pickup | 5'7" Bed | If your model is equipped with a RamBox, a crossover tool box will not fit. |
| 2019 - 2026 | Ram 1500 | Extended Cab Pickup | 5'7" Bed | If your model is equipped with a RamBox, a crossover tool box will not fit. |
| 2019 - 2026 | Ram 1500 | Crew Cab Pickup | 6'4" Bed | If your model is equipped with a RamBox, a crossover tool box will not fit. |
The UWS Gloss Black 69" Deep Angled Truck Tool Box, Low Profile TBSD-69-A-LP-B (Part #BHSGTBSD-69-A-LP-B) fits both short bed and long bed configurations. Check the fitment chart for your specific Chevrolet Silverado 1500 configuration.
The UWS Gloss Black 69" Deep Angled Truck Tool Box, Low Profile TBSD-69-A-LP-B (Part #BHSGTBSD-69-A-LP-B) fits the following vehicles: 2004-2026 Chevrolet Silverado 1500; 2007 Chevrolet Silverado 1500 Classic; 2022 Chevrolet Silverado 1500 LTD; 2002-2010 Dodge Ram 1500; 2011-2016 Ford F-250 Super Duty; 2011-2016 Ford F-350 Super Duty; 2004-2013 GMC Sierra 1500; 2007 GMC Sierra 1500 Classic; 2022 GMC Sierra 1500 Limited; 2019-2026 Ram 1500. Always verify your specific year, make, and model before ordering.
Yes, the UWS Gloss Black 69" Deep Angled Truck Tool Box, Low Profile TBSD-69-A-LP-B (Part #BHSGTBSD-69-A-LP-B) is designed to fit the 2004-2026 Chevrolet Silverado 1500.
The UWS Gloss Black 69" Deep Angled Truck Tool Box, Low Profile TBSD-69-A-LP-B (Part #BHSGTBSD-69-A-LP-B) fits 2004-2026 Chevrolet Silverado 1500 models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The UWS Gloss Black 69" Deep Angled Truck Tool Box, Low Profile TBSD-69-A-LP-B (Part #BHSGTBSD-69-A-LP-B) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The package includes one crossover truck tool box, one key, two rail pads, two 3-inch J-hooks, two 1/4" washers, and two 1/4" nuts. A divider tray is not included with all models. Check your specific package contents against the parts list.
You will need a ratchet, socket set, and tape measure. The installation is rated as Easy difficulty.
The tool box is designed for truck beds with side rails. The manual does not specify which vehicle makes, models, years or bed lengths are compatible. Consult your dealer or contact UWS customer support at 877.287.8634 to confirm fitment for your specific truck.
Yes, clearance must be verified during installation. In Step 1, open the tool box lid and ensure there is clearance between the open lid, top and back of the cab before finalizing installation. This check is critical and must be performed before fully tightening all hardware.
The manual indicates drilling may be required ('Before drilling into your truck bed, check under your vehicle...'), but does not explicitly state whether drilling is mandatory for all installations or only certain configurations. Contact UWS at 877.287.8634 or consult your dealer for clarification on your specific truck.
Before drilling, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, or other components. Precaution must be taken that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision.
Place the tool box in the truck bed and use a tape measure to ensure it is centered. Attach the adhesive side of the rail pads to the underside of the tool box ends, then place the tool box with the rail pads adhered on top of the truck bed rails. Open the lid and verify clearance with the cab before proceeding to fastening.
Place a J-hook under the lip of the bed rail and insert the threaded end up through the slot. Use only one hole and J-hook assembly on each side. Attach with a washer and nut, snugging the hardware but not fully tightening. Repeat on the other side. Re-measure to ensure the tool box is centered and allows lid clearance when open, then fully tighten all hardware.
The torque specification for 1/4" bolts is 3 ft-lbs. This is a general guideline; if purchasing additional hardware, use the torque specifications provided with that hardware.
The torque specification for 5/16" bolts is 7 ft-lbs. This is a general guideline; if purchasing additional hardware, use the torque specifications provided with that hardware.
The torque specification for 3/8" bolts is 16 ft-lbs. This is a general guideline; if purchasing additional hardware, use the torque specifications provided with that hardware.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Danger of explosion.
Yes. The product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product.
Yes. Never exceed the vehicle manufacturer's recommended capacity. Consult your vehicle's owner manual or your dealer for the specific weight limit for your truck bed.
Ensure all knobs, bolts, screws, straps and locks are firmly secured. Open the lid and verify clearance with the cab. With the crossover tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue.
For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. Periodically lubricate the strikers and locks to ensure optimum performance. Treat or seal all fasteners and exposed metal in any holes drilled in the vehicle to prevent corrosion.
If the strikers are ever out of alignment, simply loosen, adjust and re-tighten. Periodically lubricate the strikers and locks to ensure optimum performance.
Ensure all knobs, bolts, screws, straps and locks are firmly secured before every trip. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. With the crossover tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
The tool box is designed for truck beds with side rails. Specific vehicle compatibility is not listed in the manual. Contact UWS at 877.287.8634 or consult your dealer to confirm fitment for your truck.
You need a ratchet, socket set, and tape measure. Installation is rated as Easy.
The manual indicates drilling may be required but does not explicitly state whether it is mandatory for all installations. Contact UWS at 877.287.8634 for clarification on your specific truck.
Use two J-hooks (one on each side) with washers and 1/4" nuts, inserted under the bed rail lip and threaded up through the slot. Snug the hardware, re-measure for centering and lid clearance, then fully tighten.
The torque specification for 1/4" bolts is 3 ft-lbs. This is a general guideline; if purchasing additional hardware, use the torque specifications provided with that hardware.
Do not store flammables, explosives, hazardous materials or hazardous waste such as gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks or cutting torches. Danger of explosion.
Ensure all knobs, bolts, screws, straps and locks are firmly secured. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue.
On Sale Today
Original price was $995.95. Current price is $904.95.You save $91.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Tue, Aug 11 - Thu, Aug 13
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.