Our in-house experts typically reply within one business day.
UWS
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: GLOSS BLACK POWDER COAT
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. This particular box features a slim-line design, providing adequate clearance for truck beds that have extremely limited space between the wheel wells and truck cab. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability (NOTE: This product is heavily packaged for parcel shipping).
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
UWS | Tough. Reliable.
The kit includes one crossover truck tool box, one key, two rail pads, two 3-inch J-hooks, two 1/4" washers, and two 1/4" nuts. A divider tray is not included with all models. Your specific box may vary in style, size or finish.
The manual does not specify which vehicle models or bed lengths are compatible with this tool box. Contact CURT Group at 877-287-8634 or consult your dealer to confirm fitment for your specific truck.
Yes, but you must verify clearance during installation. In Step 1, open the tool box lid and ensure there is clearance between the open lid, top and back of the cab before finalizing placement. This check is essential before fully tightening the hardware.
You will need a ratchet, socket set, and tape measure. These are the only tools listed as required for installation.
The manual does not explicitly state whether drilling is required or optional. The installation uses J-hooks that attach under the bed rail lip with washers and nuts, but the manual includes a warning to check under the truck before drilling. Contact CURT Group at 877-287-8634 to confirm whether drilling is necessary for your specific truck bed configuration.
Before drilling into your truck bed, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, or other components. Precaution must also be taken that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision.
Place the tool box in the truck bed and use a tape measure to ensure it is centered. Attach the adhesive side of the rail pads to the underside of the tool box ends, then place the tool box with the rail pads adhered on top of the truck bed rails. Open the lid and check clearance with the cab before proceeding to the J-hook attachment.
Place a J-hook under the lip of the bed rail and insert the threaded end up through the slot. Use only one hole and J-hook assembly on each side. Attach with a washer and nut, and snug the hardware but do not fully tighten at this stage. Repeat on the other side, then re-measure to ensure the tool box is centered and allows lid clearance when open. Finally, fully tighten all hardware.
You should snug the hardware but not fully tighten it initially so you can re-measure the tool box to ensure it remains centered and allows proper lid clearance when open. Once you have confirmed correct positioning, you then fully tighten all hardware.
The general torque specification for 1/4" bolts is 3 ft-lbs. However, the manual notes that these are general guidelines. If you purchase replacement hardware, use the torque specifications provided with that hardware instead.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. This is a danger of explosion.
Yes. Never exceed the vehicle manufacturer's recommended capacity. The manual does not specify the tool box's own capacity; refer to your vehicle's documentation for the maximum load your truck bed can safely carry.
Yes. This product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product installed.
Ensure all knobs, bolts, screws, straps and locks are firmly secured. Open the tool box lid and verify clearance between the open lid, top and back of the cab. Confirm the tool box is centered in the truck bed. With the crossover tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Periodically lubricate the strikers and locks to ensure optimum performance. If the strikers are ever out of alignment, simply loosen, adjust and re-tighten them.
Ensure all knobs, bolts, screws, straps and locks are firmly secured before every trip. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. With the crossover tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
Yes. Treat or seal all fasteners and exposed metal in any holes drilled in the vehicle to prevent corrosion.
The manual does not specify compatible vehicle models or bed lengths. Contact CURT Group at 877-287-8634 or consult your dealer to confirm fitment for your truck.
You need a ratchet, socket set, and tape measure.
The manual does not explicitly state whether drilling is required. The installation uses J-hooks that attach under the bed rail lip, but contact CURT Group at 877-287-8634 to confirm whether drilling is necessary for your truck bed.
The general specification is 3 ft-lbs., but if you purchase replacement hardware, use the torque specifications provided with that hardware.
No. Do not store flammables, explosives or hazardous materials such as gasoline, solvents, propane tanks or acetylene tanks. This is a danger of explosion.
Ensure all knobs, bolts, screws, straps and locks are firmly secured. Verify the tool box is centered and the lid clears the cab when open.
Check all fasteners before every trip and periodically re-tighten and inspect for wear, corrosion and fatigue.
On Sale Today
Original price was $723.95. Current price is $656.95.You save $67.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Perry, FLFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
