UWS Matte Black Aluminum 72" Truck Tool Box with Low Profile TBS-72-LP-MBUWSOriginal price was $836.95. Current price is $759.95.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
UWS
Verify Fitment
Select your vehicle to confirm this part fits.
2011 - 2018 Ram 1500
Confirmed to Fit
2019 - 2024 Ram 1500 Classic
Confirmed to Fit
2011 - 2026 Ram 2500
Confirmed to Fit
2011 - 2026 Ram 2500
Confirmed to Fit
2011 - 2026 Ram 3500
Confirmed to Fit
2011 - 2026 Ram 3500
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: GLOSS BLACK POWDER COAT
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
UWS | Tough. Reliable.
55 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2006 - 2008 | Dodge Ram 1500 | Extended Crew Cab Pickup | 6'4" Bed | — |
| 2004 - 2010 | Dodge Ram 1500 | Standard Cab Pickup | 6'4" Bed | — |
| 2002 - 2003 | Dodge Ram 1500 | Standard Cab Pickup | 6'6" Bed | — |
| 2002 - 2003, 2009 - 2010 | Dodge Ram 1500 | Standard Cab Pickup | 8' Bed | — |
| 2004 - 2008 | Dodge Ram 1500 | Standard Cab Pickup | 8'2" Bed | — |
| 2003 - 2008 | Dodge Ram 2500 | Crew Cab Pickup | 6'4" Bed | — |
| 2006 - 2008 | Dodge Ram 2500 | Extended Crew Cab Pickup | 6'4" Bed | — |
| 2007 | Dodge Ram 2500 | Standard Cab Pickup | 6'4" Bed | — |
| 2003 - 2008 | Dodge Ram 2500 | Crew Cab Pickup | 8'2" Bed | — |
| 2003 - 2008 | Dodge Ram 2500 | Standard Cab Pickup | 8'2" Bed | — |
| 2003 - 2008 | Dodge Ram 3500 | Crew Cab Pickup | 6'4" Bed | — |
| 2006 - 2008 | Dodge Ram 3500 | Extended Crew Cab Pickup | 6'4" Bed | — |
| 2003 - 2008 | Dodge Ram 3500 | Crew Cab Pickup | 8'2" Bed | — |
| 2003 - 2008 | Dodge Ram 3500 | Standard Cab Pickup | 8'2" Bed | — |
| 2017 - 2022 | Ford F-250 Super Duty | Crew Cab Pickup | 6'10" Bed | — |
| 2017 - 2022 | Ford F-250 Super Duty | Extended Cab Pickup | 6'10" Bed | — |
| 1999 - 2005 | Ford F-250 Super Duty | Crew Cab Pickup | 8' Bed | — |
| 1999 - 2005 | Ford F-250 Super Duty | Extended Cab Pickup | 8' Bed | — |
| 1999 - 2005 | Ford F-250 Super Duty | Standard Cab Pickup | 8' Bed | — |
| 2008 - 2016, 2018 - 2022 | Ford F-250 Super Duty | Crew Cab Pickup | 8'2" Bed | — |
| 2008 - 2016, 2018 - 2022 | Ford F-250 Super Duty | Extended Cab Pickup | 8'2" Bed | — |
| 2008 - 2016, 2018 - 2022 | Ford F-250 Super Duty | Standard Cab Pickup | 8'2" Bed | — |
| 2006 - 2007 | Ford F-250 Super Duty | Crew Cab Pickup | 8'3" Bed | — |
| 2006 - 2007 | Ford F-250 Super Duty | Extended Cab Pickup | 8'3" Bed | — |
| 2006 - 2007 | Ford F-250 Super Duty | Standard Cab Pickup | 8'3" Bed | — |
The UWS Gloss Black Aluminum 72" Truck Tool Box with Low Profile TBS-72-LP-BLK (Part #BHSGTBS-72-LP-BLK) fits the following vehicles: 2002-2010 Dodge Ram 1500; 2003-2008 Dodge Ram 2500; 2003-2008 Dodge Ram 3500; 1999-2022 Ford F-250 Super Duty; 1999-2022 Ford F-350 Super Duty; 2008-2022 Ford F-450 Super Duty; 2011-2018 Ram 1500; 2019-2024 Ram 1500 Classic; 2011-2026 Ram 2500; 2011-2026 Ram 3500. Always verify your specific year, make, and model before ordering.
Yes, the UWS Gloss Black Aluminum 72" Truck Tool Box with Low Profile TBS-72-LP-BLK (Part #BHSGTBS-72-LP-BLK) is designed to fit the 2002-2010 Dodge Ram 1500.
The UWS Gloss Black Aluminum 72" Truck Tool Box with Low Profile TBS-72-LP-BLK (Part #BHSGTBS-72-LP-BLK) fits 2002-2010 Dodge Ram 1500 models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The UWS Gloss Black Aluminum 72" Truck Tool Box with Low Profile TBS-72-LP-BLK (Part #BHSGTBS-72-LP-BLK) fits both short bed and long bed configurations. Check the fitment chart for your specific Dodge Ram 1500 configuration.
The UWS Gloss Black Aluminum 72" Truck Tool Box with Low Profile TBS-72-LP-BLK (Part #BHSGTBS-72-LP-BLK) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The package includes one crossover truck tool box, one key, two rail pads, two 3-inch J-hooks, two 1/4" washers, and two 1/4" nuts. A divider tray is not included with all models. Check your specific package contents against the parts list.
You will need a ratchet, socket set, and tape measure. These are the only tools listed as required for installation.
The manual rates the installation difficulty as 'Easy' and does not recommend professional installation. However, the manual does not explicitly state whether professional installation is optional or required for any vehicle type.
The manual does not specify which vehicle models, years, bed lengths, or cab styles are compatible with this tool box. Contact CURT Group at 877.287.8634 or consult your dealer for fitment information specific to your vehicle.
The tool box is designed to mount on truck bed rails. Before purchasing, verify that your truck has accessible bed rails and that the tool box dimensions fit your bed length. The manual does not provide specific dimension or fitment details. Contact the manufacturer or your dealer with your truck's year, make, model and bed length.
No. The manual explicitly states 'Do not interfere with factory-installed safety equipment.' Before installation, verify that the tool box does not obstruct airbags, sensors, cameras, or other factory safety systems. If there is any interference, do not install the product.
Yes. The manual warns that 'This product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product.' Be aware of reduced rear and side visibility and drive accordingly.
The two 3-inch J-hooks are used to secure the tool box to the truck bed rails. Each J-hook is placed under the lip of a bed rail with the threaded end inserted up through a slot, then fastened with a washer and 1/4" nut. Only one J-hook assembly is used on each side of the vehicle.
The two rail pads are adhesive-backed pads that attach to the underside of the tool box ends. They are adhered to the tool box first, then the tool box with the pads is placed on top of the truck bed rails. The pads help protect the tool box and truck bed from damage.
The manual does not explicitly state whether drilling is required. However, it includes a warning to 'check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, etc.' before drilling. This suggests drilling may be necessary for some installations. Confirm with the manufacturer whether your specific tool box requires drilling.
Before drilling, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, or other components. Take precaution that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision. If you are unsure about what is under your truck bed, consult your vehicle's service manual or a qualified technician.
Use a tape measure to ensure the tool box is centered in the truck bed. Measure from the tool box to the bed rails on both sides to confirm equal spacing. The manual specifies that centering should be checked after placing the tool box with rail pads on the truck bed rails, and again after installing the J-hooks but before fully tightening the hardware.
Open the tool box lid and ensure there is clearance between the open lid, the top of the truck bed, and the back of the cab. This check should be performed before drilling or fully tightening fasteners. If clearance is insufficient, reposition the tool box and re-measure before proceeding.
1. Place the tool box in the truck bed and check lid clearance. 2. Attach adhesive rail pads to the underside of the tool box ends. 3. Place the tool box with pads on the truck bed rails. 4. Center the tool box using a tape measure. 5. Place a J-hook under the lip of each bed rail, insert the threaded end up through the slot, and attach with a washer and nut. 6. Snug the hardware but do not fully tighten. 7. Re-measure to ensure centering and lid clearance. 8. Fully tighten all hardware.
No. After placing the J-hooks and attaching them with washers and nuts, snug the hardware but do not fully tighten. First, re-measure the tool box to ensure it is centered and allows lid clearance when open. Only after confirming proper positioning should you fully tighten all hardware.
Only one J-hook assembly should be used on each side of the vehicle. The package includes two J-hooks total—one for each side.
The torque specification for 1/4" bolts is 3 ft-lbs. This is a general guideline. If you purchase replacement hardware, use the torque specifications provided with that hardware instead.
The J-hooks are fastened with 1/4" washers and nuts. The general torque specification for 1/4" bolts is 3 ft-lbs. However, the manual does not provide a specific torque value for the J-hook assembly. If you have replacement hardware, use the torque specifications provided with that hardware.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Doing so creates a danger of explosion.
The manual does not specify a weight capacity. It only states 'Never exceed the vehicle manufacturer's recommended capacity.' Consult your vehicle's owner's manual or the manufacturer for the maximum load capacity of your truck bed.
After installation, ensure all knobs, bolts, screws, straps and locks are firmly secured. Verify that the tool box is centered in the truck bed and that the lid has adequate clearance when open. Check that the tool box does not interfere with factory safety equipment or reduce visibility in an unsafe manner.
Periodic inspections should be performed to ensure all mounting hardware remains tight. Before every trip, ensure all knobs, bolts, screws, straps and locks are firmly secured. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue.
For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Periodically lubricate the strikers and locks to ensure optimum performance. If the strikers are ever out of alignment, simply loosen, adjust and re-tighten them.
Treat or seal all fasteners and exposed metal in any holes drilled in the vehicle to prevent corrosion. This protects your truck bed from rust and extends the life of the installation.
The tool box mounts on truck bed rails. Specific vehicle compatibility is not listed in the manual. Contact CURT Group at 877.287.8634 with your truck's year, make, model and bed length to confirm fitment.
The manual does not explicitly state whether drilling is required. It includes a warning to check under the truck bed before drilling to avoid puncturing brake lines, fuel lines or electrical wires. Confirm with the manufacturer whether your specific tool box requires drilling.
Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. Before every trip, ensure all knobs, bolts, screws, straps and locks are firmly secured.
On Sale Today
Original price was $836.95. Current price is $759.95.You save $77.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.