08-10 Dodge Avenger CURT 4-flat Plug and Play Trailer WiringCURTOriginal price was $138.90. Current price is $118.75.Out of Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2008 - 2014 Dodge Challenger
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
| Electrical System Type | 2W |
| Finish | N/A |
| Material | Blank |
| Mount Type Description | Blank |
| Output Type | 4-Way Flat |
| Side Application Type Description | Blank |
| T-Connector Location | P3,P4 |
| Warranty | One-Year Limited Warranty |
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2014 | Dodge Challenger | — |
The 08-14 Dodge Challenger CURT 4-flat Plug and Play Trailer Wiring (Part #CTW675) fits the following vehicles: 2008-2014 Dodge Challenger. Always verify your specific year, make, and model before ordering.
The 08-14 Dodge Challenger CURT 4-flat Plug and Play Trailer Wiring (Part #CTW675) fits 2008-2014 Dodge Challenger models. The 2014 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 08-14 Dodge Challenger CURT 4-flat Plug and Play Trailer Wiring (Part #CTW675) is designed to fit the 2008-2014 Dodge Challenger.
The 08-14 Dodge Challenger CURT 4-flat Plug and Play Trailer Wiring (Part #CTW675) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Curt 55534 is a trailer wiring harness designed for Chrysler 300, Dodge Challenger, and Dodge Charger vehicles. It includes a 4-flat connector wire, T-connectors for the taillight circuit, a grounding wire with eyelet, and fastening hardware.
Curt 55534 is designed for Chrysler 300, Dodge Challenger, and Dodge Charger. The manual does not specify model years. Confirm your vehicle matches one of these three models before purchasing.
The harness includes a 4-flat connector wire, two T-connectors (one with yellow wire, one with green wire), a white grounding wire with eyelet, a screw, and a nut. The manual does not list all fasteners or specify quantities beyond what is needed for installation.
Basic hand tools are required: a screwdriver (to remove and reinstall the trunk scuff panel and secure fasteners), a drill with a 3/32" bit (if drilling a new grounding hole), and a wrench or socket (to secure the grounding wire nut). The manual does not specify additional tools.
On the driver's side, remove the plastic wing nut securing the trunk liner and pull back the trunk liner to expose the vehicle's taillight wiring harness. Repeat on the passenger side, then partially remove the vehicle's trunk scuff panel.
On the driver's side, insert the T-connector end with the yellow wire between the separated taillight connectors. Route the T-connector end with the green wire to the passenger side under the scuff panel. Repeat this process on the passenger's side, then reinstall the scuff panel.
Locate a suitable grounding point near the connector, such as an existing screw with nut in the vehicle's frame. If no suitable point exists, drill a 3/32" hole and secure the white wire using the eyelet and screw provided with the harness.
Drilling is not always required. If a suitable existing grounding point (such as a screw with nut in the vehicle's frame) is available near the connector, you can use that. If not, you must drill a 3/32" hole for the grounding wire.
Drill a 3/32" hole for the grounding wire if an existing grounding point is not available.
Before drilling, verify that no miscellaneous items are hidden behind or under any surface. Drilling without checking can cause damage to vehicle components and personal injury.
Route the 4-flat wire to the center of the vehicle and out the trunk when in use. When not in use, roll up the wire and store it in an out-of-the-way location in the trunk.
Curt 55534 fits Chrysler 300, Dodge Challenger, and Dodge Charger. Model years are not specified in the manual.
Drilling is required only if no existing grounding point is available. If drilling is needed, a 3/32" hole is drilled for the ground wire. Always verify no hidden items are behind surfaces before drilling.
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Wed, Sep 9 - Sat, Sep 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$147.71
No reviews have been added for this product.
