Our in-house experts typically reply within one business day.
ARIES
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes one pair of side bars and mounting hardware
Finish: SEMI-GLOSS BLACK POWDER COAT
Material: Stainless Steel
Side Component Type: Board and Bracket
ARIES 3" round side bars are a reliable and budget-friendly option for side steps on your truck. This set of nerf bars offers solid rust resistance, a custom fit and a no-drill installation. Constructed from stainless steel, these 3" side bars are perfect for work or play, easily withstanding dirt, water, mud, sand, snow and road salt and maintaining dependable corrosion resistance even offroad. They also come with a durable semi-gloss black powder coat finish that greater enhances rust resistance, and helps keep the nerf bars looking clean in spite of minor scuffs and scratches. 3" diameter, heavy-wall tubing is used to construct the steps, providing excellent strength and rigidity for safe, comfortable entry and exit. These 3" round nerf bars also feature non-skid step pads to further enhance safety. The step pads are textured to increase traction, and they are custom-placed to match the door layout for a convenient step up right where you need it. To ensure the best fit and appearance on your truck, every set of 3" side bars is made vehicle-specific. This means the steps are bent to a specific contour to complement the shape of the vehicle's rocker panels. It also makes for a much easier installation compared to any universal nerf bars or running boards. These particular 3" nerf bars are designed to fit specific years of the Ram 1500 and Dodge Ram 1500 (see application info to verify fitment). ARIES side bars use heavy-duty, vehicle-specific brackets that mount using pre-existing factory holes to completely eliminate drilling from the installation process. This speeds up the install and helps avoid unnecessary modification to your vehicle. It also promotes a stronger, more rigid step for sure footing every time you climb into your truck.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Refer to Warranty PDF
3 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2009 - 2010 | Dodge Ram 1500 | Extended Cab Pickup · 4-Door | — |
| 2011 - 2018 | Ram 1500 | Extended Cab Pickup · 4-Door | — |
| 2019 - 2024 | Ram 1500 Classic | Extended Cab Pickup · 4-Door | — |
The ARIES 215040 3-Inch Round Black Stainless Steel Nerf Bars, No-Drill, Fits Select Dodge, Ram 1500 (Part #BBDR215040) fits 2009-2010 Dodge Ram 1500 models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
The ARIES 215040 3-Inch Round Black Stainless Steel Nerf Bars, No-Drill, Fits Select Dodge, Ram 1500 (Part #BBDR215040) fits the following vehicles: 2009-2010 Dodge Ram 1500; 2011-2018 Ram 1500; 2019-2024 Ram 1500 Classic. Always verify your specific year, make, and model before ordering.
Yes, the ARIES 215040 3-Inch Round Black Stainless Steel Nerf Bars, No-Drill, Fits Select Dodge, Ram 1500 (Part #BBDR215040) is designed to fit the 2009-2010 Dodge Ram 1500.
The ARIES 215040 3-Inch Round Black Stainless Steel Nerf Bars, No-Drill, Fits Select Dodge, Ram 1500 (Part #BBDR215040) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes 1 driver/left side bar, 1 passenger/right side bar, 1 driver/left front mounting bracket, 1 passenger/right front mounting bracket, 2 rear mounting brackets, and all required fasteners: M8 bolt plates (2), M8 hex bolts (5), M8 flat washers (7), M8 lock washers (7), M8 hex nuts (2), M8 plastic retainers (2), M10 hex bolts (4), M10 flat washers (4), M10 lock washers (4), M12 bolt/nut plates (4), M12 hex bolts (4), M12 flat washers (4 x 32mm and 4 standard), M12 lock washers (8), M12 hex nuts (4), and M12 plastic retainers (4).
Yes, the ARIES 215040 is designed to fit both vehicle generations, but the installation method differs. Vehicles 2015 and newer have factory threaded inserts and use M8 factory inserts for the lower bracket mounting. Vehicles 2015 and older without factory inserts require M10 bolt plates and nuts positioned behind the lower mounting holes. The manual provides separate installation steps (3A for 2015 and newer, 3B for 2015 and older) to accommodate these differences.
2015 and newer vehicles have factory threaded inserts, so the M10 nut on the M12 bolt plate is not used. The lower bracket mounting uses M8 factory inserts with M8 hex bolts. On 2015 and older vehicles without factory inserts, you must install M8 and M12 bolt plates into the rocker panel, and the M10 nut is used to secure the lower bracket mounting with an M10 hex bolt, flat washer and lock washer. Steps 3B, 4, and 8 provide the specific fastener sequences for older vehicles.
You will need a torque wrench, sockets in 13mm, 16mm, and 18mm sizes, a utility knife, and a level. The torque wrench is essential for properly securing all fasteners to specification. The level is used to adjust and level the side bars during installation (Step 6).
Yes. In Step 2, you must locate the driver-side front mounting location and remove the tape plug from each hole before inserting the M8 bolt plate and M12 bolt/nut plate. A utility knife is provided in the tools list to help with this task.
Installation begins on the driver side. First, locate the two mounting locations underneath the vehicle (Step 1). Remove tape plugs and insert bolt plates with plastic retainers (Step 2). Secure the driver-side front mounting bracket (Step 3A or 3B depending on vehicle year). Install the rear bracket (Step 4). Place the driver-side bar onto the brackets and attach with M10 bolts, snugging but not fully tightening (Step 5). Adjust and level the side bar (Step 6). Repeat Steps 4–6 for the passenger side (Steps 7–9). The manual recommends tightening all brackets to the vehicle first, then the side bar connections.
No, do not fully tighten hardware immediately. In Step 3A, snug the hardware on the front mounting bracket but do not fully tighten. In Step 5, snug the side bar hardware but do not fully tighten. Step 6 recommends tightening all brackets to the vehicle first, followed by the side bar connections. This allows for proper alignment and levelling before final torque is applied.
M8 bolts must be torqued to 7 ft.-lbs. according to the torque specifications table on page 2.
M10 bolts must be torqued to 7 ft.-lbs. according to the torque specifications table on page 2.
M12 bolts have two torque specifications: 16 ft.-lbs. or 28 ft.-lbs., depending on application. The manual states 'Use above torque setting unless otherwise noted' but does not specify which fasteners use which value. Refer to the specific step instructions or contact ARIES Automotive at 877.287.8634 for clarification on which M12 bolts use 16 ft.-lbs. versus 28 ft.-lbs.
Plastic bolt retainers are slid over the threads of M8 and M12 bolts to hold them in place temporarily during installation. In Step 2, plastic retainers are placed on the M8 bolt plate and M12 bolt/nut plate before the mounting bracket is positioned. In Step 4, a plastic retainer secures the M12 stud before the rear bracket is placed in position.
In Step 4, insert an M12 bolt/nut plate into the slot in the rocker panel. Secure the M12 stud with a plastic retainer and place the rear bracket in position. Secure the top of the bracket to the M12 stud with a flat washer, lock washer and nut. For the bottom: on 2015 and newer models with M8 factory inserts, use one M8 hex bolt, lock washer and flat washer. On 2015 and older models without M8 factory inserts, rotate the bolt plate to position the nut behind the lower mounting position and secure with an M10 hex bolt, flat washer and lock washer.
In Step 5, place the side bar onto the brackets and align the mounting holes with the holes in the brackets on the vehicle. Attach the side bar to the brackets using two M10 hex bolts, two M10 lock washers and two M10 flat washers. Snug the hardware but do not fully tighten at this stage.
In Step 6, with the side bar in position, use a level to adjust the side bar until it is level. The manual recommends tightening all brackets to the vehicle first, followed by the side bar connections, to ensure proper alignment before final torque is applied.
Steps 7–9 cover passenger-side installation. In Step 7, insert an M12 bolt/nut plate and an M8 bolt plate into the front mounting location with plastic retainers. In Step 8, secure the passenger-side front mounting bracket with M8 and M12 fasteners (fastener types vary by vehicle year). In Step 9, repeat Steps 4–6 to complete the rear bracket and side bar installation on the passenger side.
To protect the product, wax after installing. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish. For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. Periodic inspections should be performed to ensure all mounting hardware remains tight.
Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. Do not use any type of polish or wax that may contain abrasives. These products can damage the protective finish of the side bars.
After installation, periodic inspections should be performed to ensure all mounting hardware remains tight. This includes checking all M8, M10, and M12 bolts, nuts, and washers at the bracket-to-vehicle connections and the side bar-to-bracket connections.
The ARIES 215040 is designed for vehicles 2015 and newer with factory threaded inserts and vehicles 2015 and older without factory inserts. Installation methods differ by year. Contact ARIES Automotive at 877.287.8634 or visit ARIESAUTOMOTIVE.COM to confirm fitment for your specific vehicle make and model.
You will need a torque wrench, sockets (13mm, 16mm, 18mm), a utility knife, and a level. All other fasteners and brackets are included in the kit.
Yes. Use a utility knife to remove tape plugs from the mounting locations before inserting the bolt plates in Step 2.
M8 bolts: 7 ft.-lbs. M10 bolts: 7 ft.-lbs. M12 bolts: 16 ft.-lbs. or 28 ft.-lbs. (application-dependent). Refer to the torque specifications table on page 2 of the manual.
No. Snug hardware during initial bracket and side bar attachment (Steps 3A, 5), then level the side bars (Step 6). Tighten all brackets to the vehicle first, followed by side bar connections, before applying final torque.
Wax the side bars after installation and regularly thereafter. Use only mild automotive detergent for cleaning. Avoid abrasive cleaners, wire brushes, and polishes containing abrasives. Perform periodic inspections to ensure all mounting hardware remains tight.
On Sale Today
Original price was $408.95. Current price is $232.00.You save $176.95 (43%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Sun, Aug 30 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
