Our in-house experts typically reply within one business day.
ARIES
Verify Fitment
Select your vehicle to confirm this part fits.
1984 - 2000 Jeep Cherokee
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes one pair of side bars and mounting hardware
Warranty: Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
Finish: SEMI-GLOSS BLACK POWDER COAT
Material: Blank
Color: Black
Side Component Type: Board and Bracket
ARIES 3" side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3" nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3" round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3" nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Jeep Cherokee (see application info to verify fitment). ARIES 3" round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Three-Year Finish, One-Year Parts)
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 1984 - 2000 | Jeep Cherokee | — |
The ARIES 3" Round Black Steel Side Bars, Select Jeep Cherokee Step Nerf Bar Kit (Part #BBDR201000) fits the following vehicles: 1984-2000 Jeep Cherokee. Always verify your specific year, make, and model before ordering.
The ARIES 3" Round Black Steel Side Bars, Select Jeep Cherokee Step Nerf Bar Kit (Part #BBDR201000) fits 1984-2000 Jeep Cherokee models. The 2000 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the ARIES 3" Round Black Steel Side Bars, Select Jeep Cherokee Step Nerf Bar Kit (Part #BBDR201000) is designed to fit the 1984-2000 Jeep Cherokee.
The ARIES 3" Round Black Steel Side Bars, Select Jeep Cherokee Step Nerf Bar Kit (Part #BBDR201000) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes: 1 driver/left side bar, 1 passenger/right side bar, 2 front mounting brackets, 1 driver/left rear mounting bracket, 1 passenger/right rear mounting bracket, 10 M10 self-tapping hex bolts, 10 M10 flat washers, 10 M10 lock washers, 4 M12 hex bolts (50mm), 4 M12 flat washers, and 4 M12 lock washers.
The manual does not specify which vehicle makes, models, or years the 201000 is compatible with. Contact Aries Automotive at 877.287.8634 or visit ariesautomotive.com to confirm fitment for your specific vehicle.
You will need an 8mm drill bit to drill the front bracket mounting holes. The manual does not specify other tools required, such as wrenches, sockets, or torque wrench size. A torque wrench is strongly recommended to achieve the specified torque values.
The manual does not mention battery disconnection. No electrical work is described in the installation procedure.
Yes. You must drill four 8mm holes in the front sub frame to mount the front brackets. The manual instructs you to hold the front bracket in place, mark the holes, and then drill using an 8mm drill bit before securing with M10 self-tapping hex bolts.
On some models, a diagonal oblong hole may be present on the sub frame. If this occurs, it may be necessary to place the front mounting bracket at an angle to avoid drilling through this hole. Check alignment carefully before marking and drilling.
1. Start with the driver side. 2. Attach front and rear mounting brackets to the side bar using M12 bolts, lock washers, and flat washers; snug but do not fully tighten. 3. Loosen (do not remove) the front rear spring bolt and slide the slotted top edge of the rear bracket underneath its head. 4. Tighten the spring bolt to hold the rear bracket. 5. Align the front end to the sub frame and mark the 8mm holes. 6. Drill the holes. 7. Secure the front bracket with M10 self-tapping bolts, washers, and lock washers; snug but do not fully tighten. 8. Tighten all fasteners to specification. 9. Repeat for the passenger side.
No. The manual instructs you to snug (hand-tighten) the M12 bolts connecting the brackets to the side bars, and the M10 bolts connecting the front bracket to the sub frame, but not to fully tighten them until after all holes are drilled and all fasteners are in place. This allows for alignment adjustment.
No. The manual explicitly states: 'Do not remove this bolt.' You must only loosen it enough to slide the slotted top edge of the rear bracket underneath the bolt head, then tighten it again to hold the rear bracket in place.
M10 bolts should be tightened to 16 ft.-lbs. This applies to the M10 self-tapping hex bolts used to secure the front mounting brackets to the sub frame.
M12 bolts should be tightened to 28 ft.-lbs. This applies to the M12 hex bolts (50mm) used to connect the mounting brackets to the side bars.
An 8mm drill bit is required to drill the four holes in the front sub frame for the front mounting brackets.
Wax the product after installation to protect the finish. Regular waxing is recommended to add a protective layer. Do not use any polish or wax containing abrasives, as these can damage the finish. For gloss black finishes, mild soap may be used to clean the product.
Periodic inspections should be performed to ensure all mounting hardware remains tight. Wax the product after installation and regularly thereafter to protect the finish. Do not use abrasive polish or wax.
The manual does not list specific vehicle applications. Contact Aries Automotive at 877.287.8634 or visit ariesautomotive.com to confirm fitment.
Yes. You must drill four 8mm holes in the front sub frame to mount the front brackets.
An 8mm drill bit is required. A torque wrench is recommended to tighten fasteners to specification (M10 bolts to 16 ft.-lbs., M12 bolts to 28 ft.-lbs.).
M10 self-tapping bolts: 16 ft.-lbs. M12 hex bolts: 28 ft.-lbs.
Wax after installation and regularly thereafter. Do not use abrasive polish or wax. For gloss black finishes, use mild soap to clean.
Perform periodic inspections to ensure all mounting hardware remains tight.
On Sale Today
Original price was $366.95. Current price is $208.00.You save $158.95 (43%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Fri, Aug 14 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
