ARIES Jeep Wrangler JL, Gladiator Aluminum Front Tube Doors DoorARIESOriginal price was $563.95. Current price is $300.00.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
ARIES
Verify Fitment
Select your vehicle to confirm this part fits.
2020 - 2026 Jeep Gladiator
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes rear driver and passenger side doors with swing-out straps
Check with local and state laws before installing tube doors
Warranty: Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
Finish: TEXTURED BLACK POWDER COAT
Material: Aluminum
ARIES Jeep tube doors are more than a fancy aftermarket toy for your Jeep Wrangler JL or Jeep Gladiator; they are the key to turning your ride into the ultimate off-roading machine. Their open-concept design and aggressive cutout pattern makes them the perfect accessory for the desert baja and the rock climber alike. To keep your Jeep JL / Gladiator light on its feet over every sand dune, ARIES Jeep tube doors are built to be lightweight while still maintaining superior strength. They are constructed from T6 aluminum alloy, making them strong but far lighter than steel. We also use 100% TIG welds to ensure a solid build and a precise fit on your vehicle. Jeep tube doors are quick to install and easy to remove whenever necessary, using the factory hinge points. They are coated in a durable black powder coat for maximum corrosion resistance, and the unique textured finish of the powder coat helps hide minor scratches and grime from your off-road excursions (NOTE: Before purchasing ARIES Jeep tube doors, it is recommended that you check local and state laws. Some laws may prohibit the use of this product).
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
2 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2020 - 2026 | Jeep Gladiator | — | — |
| 2018 - 2026 | Jeep Wrangler | Sport Utility · 4-Door | — |
The ARIES Jeep Wrangler JL, Gladiator Aluminum Rear Tube Doors Door (Part #BBDR2500200) fits 2020-2026 Jeep Gladiator models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the ARIES Jeep Wrangler JL, Gladiator Aluminum Rear Tube Doors Door (Part #BBDR2500200) is designed to fit the 2020-2026 Jeep Gladiator.
The ARIES Jeep Wrangler JL, Gladiator Aluminum Rear Tube Doors Door (Part #BBDR2500200) fits the following vehicles: 2020-2026 Jeep Gladiator; 2018-2026 Jeep Wrangler. Always verify your specific year, make, and model before ordering.
The ARIES Jeep Wrangler JL, Gladiator Aluminum Rear Tube Doors Door (Part #BBDR2500200) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes one driver side (left) rear door, one passenger side (right) rear door, four M8 lock nuts, four M8 flat washers, and two rubber bushings.
The manual does not specify vehicle make, model, year or cab style compatibility. Contact ARIES Automotive at 877-287-8634 or check ariesautomotive.com for fitment information before purchasing.
You will need a T40 Torx bit, T50 Torx bit, ratchet, ratchet extension, and socket set. These are the only tools specified in the manual.
Yes. You must remove the factory rear doors by using a T50 Torx bit to remove the bolts securing the doors to the hinges, and a T40 Torx bit to remove the bolt from the inside of the door. This is the first step of installation.
Yes. You must remove the dome light by moving the red clip back to disconnect the light wire from the harness. This is done after removing the plastic cover from the lower kick panel between the front and rear doors.
Slide the door pins into the factory hinges. Secure the door with an M8 flat washer and lock nut. Snug the hardware but do not fully tighten at this stage. Final tightening occurs after alignment is checked.
The rubber bushing is attached to the inside of the door before closing it. The manual does not specify its exact function, but it is part of the standard installation sequence.
Yes. The safety strap must be reattached as part of Step 4, before closing the door.
After installing the tube doors, check the alignment of the locking door latch with the striker plate inside the door jam. If the door does not close completely, use a T40 Torx bit to loosen the bolts on the striker plate, align it with the door latch, and then tighten the bolts.
M8 bolts should be torqued to 7 ft-lbs. This applies to the M8 lock nuts used to secure the tube doors to the factory hinges.
The manual does not specify the torque for the striker plate bolts. Use the general torque specification table: if the bolts are M6, torque to 3 ft-lbs; if M8, torque to 7 ft-lbs; if M10, torque to 16 ft-lbs. Verify the bolt size before installation.
Use only mild automotive detergent to clean the doors. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or similar products that may damage the finish. Wax the doors after installation and regularly thereafter to add a protective layer. For polished, gloss and smooth finishes, polish may be used to clear small scratches and scuffs. Do not use any polish or wax containing abrasives.
Check the alignment of the locking door latch with the striker plate inside the door jam to ensure the door closes completely. If adjustment is needed, loosen the striker plate bolts with a T40 Torx bit, align the plate with the door latch, and tighten the bolts.
Yes. Wax the product after installing to protect the finish. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish.
The manual does not specify vehicle compatibility. Contact ARIES Automotive at 877-287-8634 or visit ariesautomotive.com to confirm fitment for your vehicle make, model and year.
You need a T40 Torx bit, T50 Torx bit, ratchet, ratchet extension, and socket set.
M8 bolts and lock nuts should be torqued to 7 ft-lbs.
No. Snug the M8 lock nuts and flat washers but do not fully tighten them until after you check and adjust the door latch alignment with the striker plate.
Use only mild automotive detergent. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or polishes containing abrasives, as these will damage the finish.
On Sale Today
Original price was $563.95. Current price is $296.59.You save $267.36 (47%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Fri, Aug 14 - Sun, Aug 16
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.