ARIES Jeep Wrangler JK Aluminum Front Tube Doors DoorARIESOriginal price was $563.95. Current price is $295.88.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
ARIES
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes rear driver and passenger side doors with swing-out straps
Check with local and state laws before installing tube doors
Warranty: Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
Finish: TEXTURED BLACK POWDER COAT
Material: Blank
Color: Black
ARIES Jeep tube doors are more than a fancy aftermarket toy for your Wrangler JK; they are the key to turning your ride into the ultimate off-roading machine. Their open-concept design and aggressive cutout pattern makes them the perfect accessory for the desert baja and the rock climber alike. To keep your Jeep JK light on its feet over every sand dune, ARIES Jeep tube doors are built to be lightweight while still maintaining superior strength. They are constructed from T6 aluminum alloy, making them strong but far lighter than steel. We also use 100% TIG welds to ensure a solid build and a precise fit on your vehicle. Jeep tube doors are quick to install and easy to remove whenever necessary, using the factory hinge points. They are coated in a durable black powder coat for maximum corrosion resistance, and the unique textured finish of the powder coat helps hide minor scratches and grime from your off-road excursions (NOTE: Before purchasing ARIES Jeep tube doors, it is recommended that you check local and state laws. Some laws may prohibit the use of this product).
Explore ARIES products at TowUniverse for top-tier grille guards, side bars, nerf bars, headache racks, and more. Upgrade your vehicle with ARIES today!
ARIES is a fast-paced marketer and innovator of truck, Jeep, SUV and CUV accessories. From automotive enthusiasts to professional builders, our products are built for the champions of individualism, innovation and attitude.
We offer the perfect combination of unique style and durable construction, specializing in custom-fit grille guards, bull bars, side bars and running boards, as well as Jeep Wrangler and Jeep Gladiator accessories.
ARIES products are made vehicle-specific for a custom fit, and they are available for a wide variety of makes and models sold in North America.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
2 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2007 - 2017 | Jeep Wrangler | Sport Utility · 4-Door | — |
| 2018 | Jeep Wrangler JK | Sport Utility · 4-Door | — |
Yes, the ARIES Jeep Wrangler JK Aluminum Rear Tube Doors Door (Part #BBDR25009) is designed to fit the 2007-2017 Jeep Wrangler.
The ARIES Jeep Wrangler JK Aluminum Rear Tube Doors Door (Part #BBDR25009) fits the following vehicles: 2007-2017 Jeep Wrangler; 2018 Jeep Wrangler JK. Always verify your specific year, make, and model before ordering.
The ARIES Jeep Wrangler JK Aluminum Rear Tube Doors Door (Part #BBDR25009) fits 2007-2017 Jeep Wrangler models. The 2018 model year is the last year covered by this part number. For newer models, check for an updated version.
The ARIES Jeep Wrangler JK Aluminum Rear Tube Doors Door (Part #BBDR25009) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The kit includes 1 driver side door back, 1 passenger side door back, 4 lock nuts (8mm), 4 flat washers (8mm), 2 rubber bushings, and 2 Phillips head sheet metal screws. The manual does not specify whether both driver and passenger doors are required for installation or can be purchased separately.
The manual does not specify which vehicle makes, models, years, cab styles or configurations the 25009 is designed for. Contact ARIES Automotive at 877.287.8634 or visit ARIESAUTOMOTIVE.COM to confirm fitment for your specific vehicle before purchasing.
You will need a ratchet, Torx T40 bit, Torx T50 bit, extension, and 13mm socket. A Phillips head screwdriver is also required to install the rubber bushings with the supplied sheet metal screws.
Yes. The installation begins by removing the torque bolts on the factory door hinges using a T50 Torx bit, then disconnecting the dome light and safety strap before lifting the factory door aside. The new tube doors are then installed by sliding the door pins into the factory hinges.
Yes. After removing the lower kick panel between the front and rear doors, you must disconnect the dome light and safety strap before lifting the factory door aside.
Slide the door pins of the new tube door into the factory hinges. Secure the door with an 8mm flat washer and lock nut. Snug the hardware but do not fully tighten at this stage—final tightening comes after alignment is confirmed.
The rubber bushings are attached to the inside of the door using the supplied Phillips head sheet metal screws. They are installed after the safety strap is reattached and before the door is closed.
1. Remove torque bolts from factory door hinges using T50 Torx bit. 2. Remove lower kick panel and disconnect dome light and safety strap. 3. Lift factory door aside. 4. Slide new tube door pins into factory hinges. 5. Secure with 8mm flat washer and lock nut (snug but do not fully tighten). 6. Reattach safety strap. 7. Attach rubber bushings to inside of door with Phillips head sheet metal screws. 8. Check alignment of door latch with striker plate. 9. Adjust striker plate if needed using T40 Torx bit. 10. Tighten hinge hardware. 11. Repeat on passenger side.
No. After securing the door with the 8mm flat washer and lock nut, snug the hardware but do not fully tighten. Final tightening of the hinge hardware comes only after the door alignment and striker plate adjustment are complete.
Check the alignment of the locking door latch with the striker plate inside the door jam. If adjustment is needed, use a T40 Torx bit to loosen the bolts on the striker plate. Align the striker plate with the door latch, then tighten the bolts once alignment is correct.
The manual describes installation on the rear passenger side first, then instructs to repeat steps 1 through 5 on the passenger side. The manual does not clarify whether both driver and passenger doors must be installed or whether installation can be done on one side only. Contact ARIES Automotive at 877.287.8634 for clarification.
Periodic inspections should be performed to ensure all mounting hardware remains tight. For black finishes, mild soap may be used to clean the product. The manual does not specify the inspection interval or other maintenance procedures.
The manual does not list specific vehicle compatibility. Contact ARIES Automotive at 877.287.8634 or visit ARIESAUTOMOTIVE.COM to confirm fitment before purchasing.
You need a ratchet, Torx T40 and T50 bits, extension, 13mm socket, and Phillips head screwdriver.
Yes, the factory doors must be removed by unbolting the hinges. The new tube doors are then installed onto the same factory hinges.
No. Snug the hinge bolts initially, then fully tighten them only after confirming door alignment and adjusting the striker plate if needed.
Perform periodic inspections to ensure all mounting hardware remains tight. For black finishes, clean with mild soap.
On Sale Today
Original price was $563.95. Current price is $280.96.You save $282.99 (50%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.