Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2018 - 2026 Honda Odyssey
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
Installation requires temporary exhaust deflector removal
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes ball mount #45521, installation hardware, pin & clip (trailer ball sold separately)
Includes ball mount #45521, installation hardware, pin & clip (trailer ball sold separately)
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Main Body Shape: Round
Receiver Tube Size (Inches): 1-1/4 IN
Color: Black
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 350 LB / 3,500 LB
Weight Carrying Capacity (Pounds): 3,500 LB
WC Tongue Weight (Pounds): 350 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
A CURT trailer hitch is the key to pursuing your passions, whether you're taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Honda Odyssey (see application info to verify fitment). It is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight. It is also equipped with 1-1/4" x 1-1/4" hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4" trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2018 - 2026 | Honda Odyssey | No Drilling Required Exhaust: Temporarily Remove Exhaust Deflector Installation Time: 30-60 minutes Reverse Fishwire Hardware: Required Underbody Panel: Permanent Removal or Trimming Required Visibility: Exposed |
The CURT 121753 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda Odyssey (Part #BKDK121753) fits the following vehicles: 2018-2026 Honda Odyssey. Always verify your specific year, make, and model before ordering.
The CURT 121753 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda Odyssey (Part #BKDK121753) fits 2018-2026 Honda Odyssey models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT 121753 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda Odyssey (Part #BKDK121753) is designed to fit the 2018-2026 Honda Odyssey.
The CURT 121753 Class 2 Trailer Hitch with Ball Mount, 1-1/4-In Receiver, Fits Select Honda Odyssey (Part #BKDK121753) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, CURT part number 12175 is designed for 2018-Present Honda Odyssey vans. It is a weight-carrying hitch with a maximum trailer weight capacity of 3,500 lbs and tongue weight capacity of 350 lbs.
The CURT 12175 is rated for a maximum trailer weight of 3,500 lbs and a tongue weight of 350 lbs when used as a weight-carrying hitch. You must never exceed your vehicle manufacturer's recommended towing capacity.
Yes, but all non-trailer (wheel-less) loads applied to this hitch must be supported by CURT 18050 stabilizing straps. Failure to properly support non-trailer loads will void the product warranty. See the CURT catalog or visit www.curtmfg.com for further information on stabilizing straps.
You will need: a ratchet, torque wrench, 9" extension, sockets in 11/16", 10mm, and 19mm sizes, a straight screwdriver, a Phillips screwdriver, and safety glasses. A Phillips head screw and hex bolt with 10mm socket are used to remove the underbody panel.
No, drilling is not required. The hitch uses existing access holes in the frame rails and existing weldnuts. The installation notes explicitly state "NO DRILLING REQUIRED."
You must remove the plastic underbody panel covering the driver side frame rail. This panel is secured by 6 fasteners: 4 plastic push pins, 1 Phillips head screw, and 1 hex bolt (10mm socket). You should return these fasteners and the plastic shield to the owner. You may trim the panel and re-attach it after hitch installation. You must also temporarily remove the exhaust deflector, which is secured by 2 fasteners, and reinstall it after the hitch is mounted.
Two people may be required to ease installation, though the manual does not state this is mandatory. If you are hesitant to undertake the task on your own, CURT recommends contacting an authorized CURT installer for additional assistance.
1. Remove the driver side underbody panel (6 fasteners: 4 push pins, 1 Phillips screw, 1 hex bolt with 10mm socket) and temporarily remove the exhaust deflector (2 fasteners). 2. Reverse fishwire the 2 carriage bolts (7/16-14 x 1 1/2") and CM-SP2 spacers into the existing holes in the bottom of the frame rails, leaving the fishwires attached. 3. Locate and clean the 2 weldnuts near the end of each frame rail of debris and rust. 4. Raise the hitch into position by sliding the passenger side plate over the exhaust first. Secure using M12-1.25 x 35mm bolts, 1/2" conical toothed washers, and 7/16" flange nuts. 5. Torque all 12mm hardware to 86 lb-ft and all 7/16" hardware to 70 lb-ft. Reinstall the exhaust deflector.
Torque all 12mm hardware (M12-1.25 x 35mm bolts) to 86 lb-ft. Torque all 7/16" hardware (7/16-14 carriage bolts and flange nuts) to 70 lb-ft.
The hitch includes: 2 pieces of 7/16" fishwire, 2 carriage bolts (7/16-14 x 1 1/2"), 2 square hole spacers (CM-SP2, .250 x .88 x 2.25"), 2 hex flange nuts (7/16-14), 4 hex bolts (M12-1.25 x 35mm), and 4 conical toothed washers (1/2").
The CURT 12175 is designed for use with ball mount #45521 (Euro mount). Ball options available are #45571 (1 7/8" ball) and #45572 (2" ball).
Safety glasses must be worn at all times while installing this product. Before beginning installation, read all instructions thoroughly. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance. Call CURT Technical Support at 800.798.0813 if you need help or have questions.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection is important for safe operation.
The manual states you should periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound, but does not specify an exact interval. Regular inspection before towing is recommended as a best practice.
Yes, the CURT 12175 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Yes, the CURT 12175 is designed specifically for 2018-Present Honda Odyssey vans. It is rated for 3,500 lbs trailer weight and 350 lbs tongue weight.
No, drilling is not required. The hitch uses existing frame rail access holes and weldnuts.
You need a ratchet, torque wrench, 9" extension, sockets (11/16", 10mm, 19mm), straight and Phillips screwdrivers, and safety glasses.
Yes, you must remove the driver side underbody panel (6 fasteners) and temporarily remove the exhaust deflector (2 fasteners). Both are reinstalled after hitch installation.
Torque all 12mm bolts to 86 lb-ft and all 7/16" hardware to 70 lb-ft.
Maximum trailer weight is 3,500 lbs and tongue weight is 350 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Safety glasses must be worn at all times during installation.
Total for 5 items:
$425.57$558.53
On Sale Today
Original price was $407.95. Current price is $274.99.You save $132.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 30 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.