Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
2015 - 2020 Cadillac Escalade
Confirmed to Fit
2015 - 2020 GMC Yukon
Confirmed to Fit
2015 - 2020 GMC Yukon XL
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Includes harness, 4-flat extension, mounting bracket and hardware
Includes harness, 4-flat extension, mounting bracket and hardware
Warranty: One-Year Limited Warranty
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
Towing your vehicle behind your RV is a great way to experience more of the adventure on your cross-country excursions. Whether you're towing a compact car or a full-size truck, CURT has the perfect solution to help you Bring It! CURT towed-vehicle RV harnesses are a vehicle-specific, plug-and-play solution to wiring your vehicle for dinghy towing. They use original-equipment-compatible connectors to plug into your vehicle's wiring system without any cutting, splicing or soldering required. They provide a standard 4-way flat connector to plug into the RV socket and synchronize the vehicle's tail lights, turn signals and brake lights with the RV's. Because each towed-vehicle RV harness has a vehicle-specific design, installation is fast and easy. This particular RV dinghy towing wiring harness is designed for specific years of the Cadillac Escalade, GMC Yukon and Yukon XL (see application info to verify fitment). CURT RV harnesses are also built to provide long-lasting operation. They feature integrated block diodes that protect the vehicle's circuits from the RV signals. They isolate the sensitive vehicle electronics, keeping them from overheating and short circuiting. Every CURT towed-vehicle RV harness comes ready to install with all necessary hardware included. They also come with a 4-way flat extension to provide plenty of length to plug into the RV socket, as well as a connector mounting bracket to mount the connector on the vehicle.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
3 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2015 - 2020 | Cadillac Escalade | — |
| 2015 - 2020 | GMC Yukon | — |
| 2015 - 2020 | GMC Yukon XL | — |
The CURT Custom Towed-Vehicle RV Wiring Harness, Select Cadillac Escalade, GMC Yukon, XL Trailer Connector Kit (Part #BKDK58965) fits the following vehicles: 2015-2020 Cadillac Escalade; 2015-2020 GMC Yukon; 2015-2020 GMC Yukon XL. Always verify your specific year, make, and model before ordering.
Yes, the CURT Custom Towed-Vehicle RV Wiring Harness, Select Cadillac Escalade, GMC Yukon, XL Trailer Connector Kit (Part #BKDK58965) is designed to fit the 2015-2020 Cadillac Escalade.
The CURT Custom Towed-Vehicle RV Wiring Harness, Select Cadillac Escalade, GMC Yukon, XL Trailer Connector Kit (Part #BKDK58965) fits 2015-2020 Cadillac Escalade models. The 2020 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT Custom Towed-Vehicle RV Wiring Harness, Select Cadillac Escalade, GMC Yukon, XL Trailer Connector Kit (Part #BKDK58965) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The CURT 58965 is designed for SUVs and Vans (S). The manual does not list specific vehicle makes, models, or years. Contact CURT or consult a fitment database to confirm compatibility with your exact vehicle before purchasing.
The CURT 58965 is a custom wiring harness that connects your vehicle's taillights to a 4-flat trailer connector. Once installed and tested with a trailer, the taillights on both the tow vehicle and trailer will function together.
You will need: a drill, a 3/32" drill bit, a panel trim removal tool, and a cutting tool. The manual rates the installation difficulty as Easy.
Yes. Step 1 requires you to locate the vehicle battery using your owner's manual, then disconnect the negative battery terminal. Fasten this wire down and away from the battery during installation. Reconnect it after all installation steps are complete.
The harness has two main connectors. The yellow wire connector installs at the rear corner under the vehicle on the driver side, separated from the factory harness. The green wire connector installs at the rear corner on the passenger side. Both connectors must be separated carefully to avoid damaging the locking tabs.
After installing the yellow wire connector at the driver side rear corner, route the custom RV harness along the rear bumper to the passenger side. Use the provided cable ties to loosely secure the wiring as needed. Then install the green wire connector at the passenger side rear corner and tighten the cable ties so the harness is firmly in place.
You may need to drill. First, locate an existing screw or bolt in the vehicle frame near the box to use as a grounding point. If no suitable existing fastener is available, drill a 3/32" pilot hole. The area must be free from rust, dirt, and paint; use an abrasive pad or paper to clean it. Before drilling, check for miscellaneous items hidden behind or under surfaces to avoid damage or personal injury.
The white ground wire has a ring terminal. Secure it either on an existing fastener in the vehicle frame or with the provided ground screw. The grounding point must be clean, free from rust, dirt, and paint.
The 4-flat connector is routed in stages: (1) along the fuel fill tube and above the frame rail to the rear of the fuel tank on the driver side; (2) above and along the frame rail to just behind the driver-side front wheel, secured loosely with cable ties; (3) to the rear of the driver-side wheel well; (4) up through the wheel well lining into the engine compartment below the brake master cylinder and left of the main fuse block; (5) along the secondary battery box up to the radiator support.
Use the provided cable ties to secure the wire, but do not tighten them so much that they cause unnecessary strain, which could lead to breakage over time. After removing slack, tighten the zip ties and add additional ones as needed. Secure any excess wire to a solid spot along the driver-side inner fender so it is not drooping or dangling.
Reinstall all items removed during installation. Reconnect the negative battery terminal if it was disconnected. Install the provided 4-flat dust cover to help prevent corrosion. Test the harness for proper function by attaching the 4-flat to any vehicle with functioning trailer lights; the taillights on both the tow vehicle and trailer should function together.
Attach the 4-flat connector to any vehicle with functioning trailer lights. The taillights on the tow vehicle should function along with the taillights on the trailer. Alternatively, use a test light to verify proper function.
Periodic inspection of all wires and connections should be performed to ensure there is no visible damage or loose connections. No specific inspection interval is provided in the manual.
Do not exceed the product rating or the tow vehicle lamp load rating, whichever is lower. The manual does not specify the product's rating; consult the product documentation or CURT for the exact capacity.
Before drilling, check for miscellaneous items that may be hidden behind or under any surface to avoid damage and personal injury. This is especially important when drilling the 3/32" pilot hole for the ground wire.
The CURT 58965 is designed for SUVs and Vans (S). Confirm your specific vehicle model and year with CURT or a fitment database before purchasing.
Yes, disconnect the negative battery terminal before beginning installation and reconnect it after all steps are complete.
Drilling may be required. If no existing screw or bolt is available for the ground wire, you must drill a 3/32" pilot hole. Always check for hidden items before drilling.
Do not exceed the product rating or tow vehicle lamp load rating, whichever is lower. Consult product documentation for the specific rating.
On Sale Today
Original price was $152.95. Current price is $126.71.You save $26.24 (17%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Thu, Aug 13 - Sat, Aug 15
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.