Our in-house experts typically reply within one business day.
Luverne
Verify Fitment
Select your vehicle to confirm this part fits.
2011 - 2021 Jeep Grand Cherokee
Confirmed to Fit
Confirmed to Fit
2010 - 2018 Toyota 4Runner
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Like many LUVERNE side steps and running boards, O-Mega II 6" oval side steps are made to work hard and to do it with style. They are constructed from strong, lightweight, rust-free aluminum, and to truly make them a step up from the rest, we shield them in a highly durable powder coat finish. This ensures maximum corrosion resistance and excellent protection against scuffs and scratches. The side steps are available in two powder coat finish options, including textured black and silver powder coat. O-Mega II side steps are also made to provide safe, comfortable entry and exit from your vehicle. They feature tough aluminum step pads with protruded circular treads that will never wear or crack. This package includes the side steps only and requires mounting brackets for a complete installation (sold separately).
LUVERNE O-Mega II 6" oval side steps are made to work hard and to do it with style. They are constructed from strong, lightweight, rust-free aluminum and shielded in a highly durable powder coat finish of textured black or smooth silver.
LUVERNE has manufactured truck accessories in the United States since 1963, specialising in grille guards, running boards, side steps and mud guards for pickups, commercial vans and SUVs. Products are built primarily from stainless steel, aluminium and mild steel, with model-specific mounting kits that use existing frame locations for a bolt-on installation.
LUVERNE has been manufacturing automotive accessories in the United States since 1963, and six decades of continuous production have made it a nationally recognised name in the truck accessory market. Now a Lippert brand, it concentrates on a defined set of products rather than spreading across the whole aftermarket: front-end protection, step access and spray protection for pickup trucks, commercial vans and sport utility vehicles.
Step products are the largest part of the catalog and the range is unusually deep, because the right step depends on the vehicle's ride height, the width of the rocker panel and how often people get in and out. The O-Mega II six-inch oval steps give a wide, flat standing surface in polished stainless or black powder coat, while the Regal 7 seven-inch oval steps go wider still for full-size crew cabs and lifted trucks. The broader running board and side bar range covers round tube, oval and boxed profiles across cab configurations, with treads positioned at the door openings where they are used.
Grille guards protect the front end against impacts, brush and road debris, built in tubular stainless or steel with model-specific brackets that tie into factory frame mounting points. Because the fit is engineered per vehicle, installation is a bolt-on job that does not require drilling or cutting on most applications.
Rounding out the line, LUVERNE mud guards and mud flaps shield rocker panels, paint and following vehicles from stones and road spray, in widths matched to the tyre and fender they sit behind. Material choice runs through everything the brand does: stainless steel where appearance and corrosion resistance matter most, aluminium where weight is the priority, and mild steel with protective coating where strength and value lead. Customers include contractors, fleet operators, van upfitters and truck owners.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
6 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2015 - 2022 | Chevrolet Colorado | Extended Cab Pickup | — |
| 2015 - 2022 | GMC Canyon | Extended Cab Pickup | — |
| 2011 - 2021 | Jeep Grand Cherokee | — | — |
| 2022 | Jeep Grand Cherokee WK | — | — |
| 2010 - 2018 | Toyota 4Runner | — | — |
| 2005 - 2023 | Toyota Tacoma | Extended Cab Pickup | — |
The O-MEGA II 6" Oval Steps package includes: 2 step extrusions (available in silver or black aluminum, in three length options), 4 step pads, 4 end caps, 24 square head bolts (5/16-18 x 1"), 24 serrated flange nuts (5/16-18), and 20 TEK screws (#8-18 x 1/2"). A separate bracket package is required for mounting to your vehicle.
The O-MEGA II 6" Oval Steps are a universal application product. The manual provides specific step pad location guidance for Silverado, Sierra, Colorado, Canyon, Avalanche, Suburban, Yukon, Yukon XL, Tahoe, RAM Quad Cab, RAM Crew Cab, RAM Mega Cab, Dodge Dakota Quad Cab, Dodge Durango, Ford F150 Super Cab, Ford F150 Super Crew Cab, Ford Super Duty Super Cab, Ford Super Duty Crew Cab, Toyota Tundra Double Cab 07+, Toyota Tundra CrewMax 07+, Toyota Tacoma Access Cab, and Toyota Tacoma Double Cab. For other vehicles, contact the manufacturer or your installer.
Step pad locations vary by vehicle model and cab style. Pad A is positioned near the front of the step, and Pad B near the rear. For example, Silverado/Sierra Double Cab uses 14-3/4" for Pad A and 46-3/4" for Pad B; Silverado/Sierra Crew Cab uses 14-3/4" and 54-1/4". Refer to the Step Pad Location Guide table on page 2 for your specific vehicle model and cab configuration. Note: these locations are suggestions and may be adjusted at the purchaser's discretion.
The manual specifies that you will need a drill to create 1/8" holes for the step pad attachment. The manual does not list other required tools. Consult the separate bracket package instructions for any additional tools needed to mount the brackets to your vehicle.
Yes. The manual states: "Follow the instructions included with the specific bracket package that you are using, to mount the brackets to your vehicle." The bracket package instructions are separate from these O-MEGA II step installation instructions and must be followed to properly mount the brackets before attaching the steps.
Yes. The manual states: "Read instructions completely and check to make sure that all required parts (listed on the Service Parts List) are on hand before starting the installation." Verify you have 2 step extrusions, 4 step pads, 4 end caps, 24 square head bolts, 24 serrated flange nuts, and 20 TEK screws before beginning work.
The installation sequence is: 1) Mount the brackets to your vehicle using the separate bracket package instructions. 2) Position and attach the step pads to the step plates using 1/8" holes and TEK screws. 3) Install square head bolts into the slots in the bottom of the step plates. 4) Install end caps and tighten nuts to 5 lb ft. 5) Position the step on the mounting brackets with square head screws in the bracket slots, centered front to rear. 6) Install serrated flange nuts on the square head screws and tighten to 19 lb ft.
Yes. You must drill five 1/8" holes through the step plates using the step pad as a guide. These holes are used to attach the step pads with the provided #8-18 x 1/2" TEK screws. This drilling is required for each step pad.
The end cap nuts must be tightened to 5 lb ft.
The 5/16" serrated flange nuts that secure the square head screws to the mounting brackets must be tightened to 19 lb ft.
The square head bolts are 5/16-18 x 1" (part number 106880). The serrated flange nuts are 5/16-18 stainless steel (part number 102680). Twenty-four of each are included in the package.
The TEK screws are #8-18 x 1/2" stainless steel (part number 107958). Twenty screws are provided, which allows for five screws per step pad on four pads.
You must drill five 1/8" holes through the step plates using the step pad as a guide. These holes are used to attach the step pads with the provided TEK screws.
Position the O-MEGA step on the mounting brackets so that: 1) The square head screws (item #4) are located in the slots of the mounting brackets, and 2) The step is centered front to rear on the vehicle. Then install the 5/16" serrated flange nuts on the square head screws and tighten to 19 lb ft.
The square head bolts are installed into the designated slots in the bottom of the step plates. The manual does not specify the exact number of bolts per step or their precise spacing; refer to the bracket package instructions or contact the manufacturer for specific placement details.
Before attaching the step pads to the step plates, use the Step Pad Location Guide table on page 2 to determine the correct position for your vehicle. The table provides measurements for Pad A (front position) and Pad B (rear position) for each vehicle model and cab style. Note that these locations are suggestions and may be adjusted at the purchaser's discretion.
The O-MEGA II is a universal application. The manual provides specific pad location guidance for Silverado, Sierra, Colorado, Canyon, Avalanche, Suburban, Yukon, Tahoe, RAM, Dodge Dakota, Dodge Durango, Ford F150, Ford Super Duty, and Toyota Tundra/Tacoma models. For other vehicles or to confirm fitment, contact the manufacturer.
You will need a drill to create 1/8" holes for step pad attachment. Additional tools may be required by the separate bracket package instructions.
End cap nuts: 5 lb ft. Serrated flange nuts (5/16-18) securing the step to brackets: 19 lb ft.
Yes. A separate bracket package is required to mount the brackets to your vehicle. Follow the instructions included with your specific bracket package before attaching the steps.
Position the step on the mounting brackets so that the square head screws are located in the slots of the mounting brackets and the step is centered front to rear on the vehicle before tightening the serrated flange nuts to 19 lb ft.
On Sale Today
Original price was $417.95. Current price is $367.95.You save $50.00 (12%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Oct 9 - Mon, Oct 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
