Our in-house experts typically reply within one business day.
Luverne
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Like many LUVERNE side steps and running boards, O-Mega II 6" oval side steps are made to work hard and to do it with style. They are constructed from strong, lightweight, rust-free aluminum, and to truly make them a step up from the rest, we shield them in a highly durable powder coat finish. This ensures maximum corrosion resistance and excellent protection against scuffs and scratches. The side steps are available in two powder coat finish options, including textured black and silver powder coat. O-Mega II side steps are also made to provide safe, comfortable entry and exit from your vehicle. They feature tough aluminum step pads with protruded circular treads that will never wear or crack. The step pads offer a non-skid surface, and they are finished with a textured black powder coat for lasting corrosion resistance. Also unique to our O-Mega II step pads is their customizable positioning. The pads are packaged unattached from the tubes and mount with self-tapping screws. This allows you to precisely match the layout of your vehicle to suit your preferences. You can mount them to the provided factory specifications or adjust them to a custom placement. The 6" x 2-3/4" tubes are fitted with black TPO plastic end caps, adding a modern, professional look. The end caps are also paintable to allow for even further customization. Each set of O-Mega II side steps is designed for vehicle-specific installation and fitment, using a unique set of mounting brackets. This particular set of side steps fits specific years of the Toyota 4Runner (see application info to verify fitment). NOTE: Mounting brackets are included but ship separately.
LUVERNE O-Mega II 6" oval side steps are made to work hard and to do it with style. They are constructed from strong, lightweight, rust-free aluminum and shielded in a highly durable powder coat finish of textured black or smooth silver.
LUVERNE has manufactured truck accessories in the United States since 1963, specialising in grille guards, running boards, side steps and mud guards for pickups, commercial vans and SUVs. Products are built primarily from stainless steel, aluminium and mild steel, with model-specific mounting kits that use existing frame locations for a bolt-on installation.
LUVERNE has been manufacturing automotive accessories in the United States since 1963, and six decades of continuous production have made it a nationally recognised name in the truck accessory market. Now a Lippert brand, it concentrates on a defined set of products rather than spreading across the whole aftermarket: front-end protection, step access and spray protection for pickup trucks, commercial vans and sport utility vehicles.
Step products are the largest part of the catalog and the range is unusually deep, because the right step depends on the vehicle's ride height, the width of the rocker panel and how often people get in and out. The O-Mega II six-inch oval steps give a wide, flat standing surface in polished stainless or black powder coat, while the Regal 7 seven-inch oval steps go wider still for full-size crew cabs and lifted trucks. The broader running board and side bar range covers round tube, oval and boxed profiles across cab configurations, with treads positioned at the door openings where they are used.
Grille guards protect the front end against impacts, brush and road debris, built in tubular stainless or steel with model-specific brackets that tie into factory frame mounting points. Because the fit is engineered per vehicle, installation is a bolt-on job that does not require drilling or cutting on most applications.
Rounding out the line, LUVERNE mud guards and mud flaps shield rocker panels, paint and following vehicles from stones and road spray, in widths matched to the tyre and fender they sit behind. Material choice runs through everything the brand does: stainless steel where appearance and corrosion resistance matter most, aluminium where weight is the priority, and mild steel with protective coating where strength and value lead. Customers include contractors, fleet operators, van upfitters and truck owners.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2010 - 2018 | Toyota 4Runner | Fits Limited only |
The O-MEGA II 6" Oval Steps (models 583072, 583078, 583088, 584072, 584078, 584088) are universal application steps designed to mount to your vehicle's rocker panel. They are available in silver or black aluminum extrusions in three sizes (69.0", 75.0", and 85.0"). The steps come with step pads that should be positioned according to your specific vehicle model using the provided location guide, which includes Silverado, Sierra, Colorado, Canyon, Avalanche, Suburban, Yukon, Tahoe, Ram, Dodge Dakota, Dodge Durango, Ford F150, Ford Super Duty, Toyota Tundra, and Toyota Tacoma models.
The Mega Step Bracket model 571054 is specifically designed for 2010 and newer Toyota 4Runner vehicles. It includes front and rear mounting brackets that attach to the existing rocker panel support brackets underneath the vehicle, along with the necessary fasteners and step boards.
The O-MEGA II steps are universal application, but step pad positioning varies by vehicle. The manual includes a Step Pad Location Guide on page 2 with specific pad positions (Pad A and Pad B measurements) for: Silverado/Sierra (Double, Extended, and Crew Cab), Colorado/Canyon (Extended and Crew Cab), Avalanche, Suburban, Yukon XL, Tahoe, Yukon, Ram (Quad, Crew, and Mega Cab), Dodge Dakota Quad Cab, Dodge Durango, Ford F150 (Super Cab and Super Crew Cab), Ford Super Duty (Super Cab and Crew Cab), Toyota Tundra (Double Cab and CrewMax 07+), and Toyota Tacoma (Access Cab and Double Cab). If your vehicle is not listed, the manual notes that pad locations are suggestions and may be placed at the purchaser's discretion.
No. The Mega Step Bracket model 571054 is designed specifically for 2010 and newer Toyota 4Runner vehicles only.
Each O-MEGA II step kit includes: 2 aluminum extrusions (available in 69.0", 75.0", or 85.0" lengths, silver or black), 4 step pads (aluminum, black), 4 plastic end caps, 24 square head bolts (5/16-18 x 1"), 24 serrated flange nuts (5/16-18, stainless steel), and 20 TEK screws (#8-18 x 1/2", stainless steel). You will also need a specific bracket package for your vehicle, which includes separate instructions.
The Mega Step Bracket kit includes: 2 front step brackets (left/right), 4 rear step brackets (left/right), 12 M8 x 1.25 x 25mm hex screws (zinc plated), and 12 flat stainless steel washers (5/16"). The step boards, serrated flange nuts (5/16"), and square head screws (5/16-18 x 1.00) are packaged separately with the boards, not with the brackets.
The manual requires a drill with a 1/8" drill bit to create holes for the step pad attachment. A wrench or socket set is needed to tighten the bolts and nuts to the specified torque values (5 lb ft for end caps, 19 lb ft for serrated flange nuts). The manual does not specify additional tools beyond these.
The manual requires a wrench or socket set to tighten M8 bolts and 5/16" serrated flange nuts to 19 ft lbs. No other tools are specified in the manual.
The manual does not specify whether battery disconnection is required. Consult the specific bracket package instructions for your vehicle or contact the manufacturer.
Before starting installation, read the instructions completely and verify that all required parts listed in the Service Parts List are on hand. You will also need to follow the instructions included with the specific bracket package for your vehicle, as the O-MEGA II steps require a separate bracket package to mount to your vehicle.
The first step is to locate the three mounting brackets on the underside of the rocker panel that are used as supports for the rocker panel molding. These existing brackets will serve as the attachment points for the new step brackets.
Yes. You must drill five 1/8" holes through the step plate using the step pad as a guide. The step pad is then attached with five #8-18 x 1/2" TEK screws (provided). This drilling and attachment process must be repeated for all step pads.
No drilling is required. The Mega Step Bracket installation uses existing rocker panel support brackets and fastens with supplied M8 bolts and washers.
Before attaching the step pads to the step plates, use the Step Pad Location Guide on page 2 to determine the correct positions (Pad A and Pad B measurements) for your specific vehicle model. The guide provides measurements for Silverado, Sierra, Colorado, Canyon, Avalanche, Suburban, Yukon, Tahoe, Ram, Dodge Dakota, Dodge Durango, Ford F150, Ford Super Duty, Toyota Tundra, and Toyota Tacoma. The manual notes that these locations are suggestions and may be placed at the purchaser's discretion.
1. Position step pads on step plates using the vehicle-specific location guide. 2. Drill five 1/8" holes using the step pad as a guide and attach with five #8-18 x 1/2" TEK screws. Repeat for all pads. 3. Install the required number of square head bolts into the designated slots in the bottom of the step plates. 4. Install end caps and tighten nuts to 5 lb ft. 5. Position the step on the mounting brackets so square head screws are in the bracket slots and the step is centered front to rear. 6. Install 5/16" serrated flange nuts on the square head screws and tighten to 19 lb ft.
Mount the front bracket (Item #2) over the existing rocker panel bracket. Fasten it with the supplied M8 bolts and washers (Items #4 and #5), and tighten to 19 ft lbs.
Mount the second and third brackets (Item #3) by gently pulling down on the rocker panel bracket and sliding the step bracket into place. Fasten with the supplied M8 bolts and washers (Items #4 and #5), and tighten to 19 ft lbs.
Insert three 5/16" square head screws (Item #7) in the outer slot on the underside of each step board.
Position the Mega Step on the mounting brackets so that the square head screws are located in the slots of the mounting brackets and the step is centered front to rear on the vehicle. Install 5/16" serrated flange nuts (Item #6) on the square head screws and tighten to 19 ft lbs.
The end cap nuts must be tightened to 5 lb ft.
The 5/16" serrated flange nuts (Item #5) that secure the square head screws (Item #4) to the mounting brackets must be tightened to 19 lb ft.
The M8 bolts and washers used to fasten both the front bracket (Item #2) and rear brackets (Item #3) to the rocker panel support brackets must be tightened to 19 ft lbs.
The 5/16" serrated flange nuts (Item #6) that secure the square head screws to the step boards must be tightened to 19 ft lbs.
Five 1/8" holes are drilled through the step plate using the step pad as a guide for each step pad.
The O-MEGA II step extrusions are available in three sizes: 69.0", 75.0", and 85.0" lengths. Each kit includes two extrusions. They are available in silver or black aluminum.
The TEK screws are #8-18 x 1/2", stainless steel with bronze plating (Item #6). Five screws are used per step pad.
The square head bolts are 5/16-18 x 1" with Magniguard coating (Item #4). Twenty-four bolts are included in each kit.
The serrated flange nuts are 5/16-18, hexagonal, stainless steel (Item #5). Twenty-four nuts are included in each kit.
The M8 bolts are M8 x 1.25 x 25mm, zinc plated (Item #4). Twelve bolts are included in the kit.
The washers are flat, stainless steel, 5/16" size (Item #5). Twelve washers are included in the kit.
The square head screws are 5/16-18 x 1.00 (Item #7). Twelve screws are included in the kit, packaged with the step boards rather than with the brackets.
The manual emphasizes reading the instructions completely before installation and following the instructions included with the specific bracket package for your vehicle. The manual does not provide additional safety warnings or operating restrictions.
The manual emphasizes reading the instructions completely before installation. When installing the rear brackets, the manual notes to gently pull down on the rocker panel bracket to avoid damage. No other safety warnings or operating restrictions are provided.
The O-MEGA II is universal application. Check the Step Pad Location Guide on page 2 for your specific vehicle model (Silverado, Sierra, Colorado, Canyon, Avalanche, Suburban, Yukon, Tahoe, Ram, Dodge Dakota, Dodge Durango, Ford F150, Ford Super Duty, Toyota Tundra, or Toyota Tacoma). If your vehicle is not listed, pad locations may be placed at your discretion.
Yes, if your vehicle is a 2010 or newer Toyota 4Runner. The model 571054 is designed specifically for 2010+ 4Runner vehicles only.
You need a drill with a 1/8" bit and a wrench or socket set to tighten bolts and nuts to the specified torque values (5 lb ft for end caps, 19 lb ft for serrated flange nuts).
You need a wrench or socket set to tighten M8 bolts and 5/16" serrated flange nuts to 19 ft lbs.
Yes. You must drill five 1/8" holes through the step plate for each step pad using the pad as a guide, then attach with five #8-18 x 1/2" TEK screws.
End cap nuts: 5 lb ft. Serrated flange nuts (5/16") securing square head screws to mounting brackets: 19 lb ft.
M8 bolts fastening brackets to rocker panel: 19 ft lbs. Serrated flange nuts (5/16") securing square head screws to step boards: 19 ft lbs.
On Sale Today
Original price was $594.95. Current price is $521.95.You save $73.00 (12%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Fri, Oct 9 - Mon, Oct 12
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
