Our in-house experts typically reply within one business day.
Luverne
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Like many LUVERNE side steps and running boards, O-Mega II 6" oval side steps are made to work hard and to do it with style. They are constructed from strong, lightweight, rust-free aluminum, and to truly make them a step up from the rest, we shield them in a highly durable powder coat finish. This ensures maximum corrosion resistance and excellent protection against scuffs and scratches. The side steps are available in two powder coat finish options, including textured black and silver powder coat. O-Mega II side steps are also made to provide safe, comfortable entry and exit from your vehicle. They feature tough aluminum step pads with protruded circular treads that will never wear or crack. The step pads offer a non-skid surface, and they are finished with a textured black powder coat for lasting corrosion resistance. Also unique to our O-Mega II step pads is their customizable positioning. The pads are packaged unattached from the tubes and mount with self-tapping screws. This allows you to precisely match the layout of your vehicle to suit your preferences. You can mount them to the provided factory specifications or adjust them to a custom placement. The 6" x 2-3/4" tubes are fitted with black TPO plastic end caps, adding a modern, professional look. The end caps are also paintable to allow for even further customization. Each set of O-Mega II side steps is designed for vehicle-specific installation and fitment, using a unique set of mounting brackets. This particular set of side steps fits specific years of the Toyota Tundra (see application info to verify fitment). NOTE: Mounting brackets are included but ship separately.
LUVERNE O-Mega II 6" oval side steps are made to work hard and to do it with style. They are constructed from strong, lightweight, rust-free aluminum and shielded in a highly durable powder coat finish of textured black or smooth silver.
LUVERNE has manufactured truck accessories in the United States since 1963, specialising in grille guards, running boards, side steps and mud guards for pickups, commercial vans and SUVs. Products are built primarily from stainless steel, aluminium and mild steel, with model-specific mounting kits that use existing frame locations for a bolt-on installation.
LUVERNE has been manufacturing automotive accessories in the United States since 1963, and six decades of continuous production have made it a nationally recognised name in the truck accessory market. Now a Lippert brand, it concentrates on a defined set of products rather than spreading across the whole aftermarket: front-end protection, step access and spray protection for pickup trucks, commercial vans and sport utility vehicles.
Step products are the largest part of the catalog and the range is unusually deep, because the right step depends on the vehicle's ride height, the width of the rocker panel and how often people get in and out. The O-Mega II six-inch oval steps give a wide, flat standing surface in polished stainless or black powder coat, while the Regal 7 seven-inch oval steps go wider still for full-size crew cabs and lifted trucks. The broader running board and side bar range covers round tube, oval and boxed profiles across cab configurations, with treads positioned at the door openings where they are used.
Grille guards protect the front end against impacts, brush and road debris, built in tubular stainless or steel with model-specific brackets that tie into factory frame mounting points. Because the fit is engineered per vehicle, installation is a bolt-on job that does not require drilling or cutting on most applications.
Rounding out the line, LUVERNE mud guards and mud flaps shield rocker panels, paint and following vehicles from stones and road spray, in widths matched to the tyre and fender they sit behind. Material choice runs through everything the brand does: stainless steel where appearance and corrosion resistance matter most, aluminium where weight is the priority, and mild steel with protective coating where strength and value lead. Customers include contractors, fleet operators, van upfitters and truck owners.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
1 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2007 - 2021 | Toyota Tundra | Extended Cab Pickup | — |
The O-MEGA II 6" Oval Steps (models 583072, 583078, 583088, 584072, 584078, 584088) are universal application steps designed to mount to vehicles using specific bracket packages. The manual provides a step pad location guide for Silverado, Sierra, Colorado, Canyon, Avalanche, Suburban, Yukon, Tahoe, RAM, Dodge Dakota, Dodge Durango, Ford F150, Ford Super Duty, Toyota Tundra, and Toyota Tacoma. Installation requires vehicle-specific mounting brackets and proper pad positioning according to the provided table.
The O-MEGA II steps are universal, but fitment depends on having the correct mounting brackets for your vehicle and cab style. The manual includes a step pad location guide for specific vehicles: Silverado/Sierra (Double, Extended, and Crew Cab), Colorado/Canyon (Extended and Crew Cab), Avalanche/Suburban/Yukon XL, Tahoe/Yukon, RAM (Quad, Crew, and Mega Cab), Dodge Dakota Quad Cab, Dodge Durango, Ford F150 (Super Cab and Super Crew Cab), Ford Super Duty (Super Cab and Crew Cab), and Toyota Tundra and Tacoma (various configurations). You must follow the instructions included with your specific bracket package to confirm fitment.
The Mega Steps Brackets (model 570752) are specifically designed for 2007 Toyota Tundra Double Cab and Crew Max pickups. The manual does not confirm compatibility with other model years or Toyota vehicles. Contact the manufacturer or consult your specific bracket package instructions to verify fitment for your vehicle.
The O-MEGA II steps include: 2 extrusions (aluminum, 69.0", 75.0", or 85.0" length, silver or black), 4 step pads (aluminum, black), 4 end caps (plastic, 2.95 x 6.70), 24 square head screws (5/16-18 x 1"), 24 serrated flange nuts (5/16-18, stainless steel), and 20 tek screws (#8-18 x 1/2", stainless steel, bronze plated). The mounting brackets are not included and must be ordered separately according to your vehicle type.
The Mega Steps Brackets (model 570752) include: 2 each of bracket types #1, #2, #3, and #4 (8 brackets total), 16 M8-1.25 x 25mm zinc-plated hex head cap screws, 16 lock washers (5/16"), 16 flat washers (5/16"), 16 serrated flange nuts (5/16-18, stainless steel), and 8 square head screws (5/16-18). The step board assembly is sold separately and length varies by application.
The manual specifies that you will need a drill with a 1/8" bit to drill 5 holes per step pad. You will also need a wrench or socket set to tighten fasteners to the specified torque values (5 lb ft for end caps, 19 lb ft for flange nuts). The manual does not list other specific tools required, but standard installation tools such as a torque wrench are recommended for proper fastener tightening.
The manual does not specify the tools required for bracket installation. However, you will need a wrench or socket set to tighten the M8-1.25 x 25mm hex head cap screws and serrated flange nuts to 19 lb ft torque. A torque wrench is recommended to ensure proper fastener tightening. Refer to the specific bracket package instructions for any additional tools needed.
The manual does not specify removal of any vehicle components. However, you must follow the instructions included with your specific bracket package, which may require removal or preparation of certain parts. Before starting installation, verify that all required parts are on hand and review the bracket package instructions for your vehicle.
Before installation, verify that all required parts are on hand. The brackets attach to existing threaded inserts in the rocker panel interior wall. The brackets are identified with notches on the inboard edge: 1 notch for bracket #1, 2 notches for bracket #2, etc. Bracket #1 is positioned at the front of the vehicle. Ensure you have the correct bracket orientation before attachment.
Before attaching the step pads to the step plates, use the Step Pad Location Guide on sheet 2 to determine the correct position for your vehicle model and cab style. The guide provides measurements for Pad A and Pad B locations. Pad positions are suggestions and may be placed at the purchaser's discretion. Once positioned, drill 5 holes using the step pad as a guide and attach with 5 tek screws (item #6, #8-18 x 1/2").
1. Position step pads on step plates using the vehicle-specific location guide and drill 5 holes per pad; attach with tek screws. 2. Install square head bolts into the designated slots in the bottom of the step plates. 3. Install end caps as shown in figure 1, tightening nuts to 5 lb ft. 4. Position the step on mounting brackets so square head screws are in the bracket slots and the step is centered front to rear. 5. Install serrated flange nuts on square head screws and tighten to 19 lb ft.
Position the brackets on the vehicle so both holes line up with the threaded inserts in the rocker panel interior wall. Attach the top of each bracket with an M8-1.25 x 25mm zinc-plated hex head cap screw, 5/16" flat washer, and lock washer (items #6, #7, #8). Level the brackets and tighten the fasteners to 19 lb ft. The brackets are identified with notches: bracket #1 (1 notch) goes at the front, followed by brackets #2, #3, and #4.
1. Insert four 5/16" square head screws (item #4) in the center slot on the underside of the step. 2. Position the step on the mounting brackets so the square head screws are located in the slots of the mounting brackets and the step is centered front to rear on the cab. 3. Locate the step in and out as desired. 4. Install 5/16" serrated flange nuts (item #5) on the square head screws and tighten to 19 lb ft.
Yes. For each step pad, you must drill 5 holes using the step pad as a guide. The holes are 1/8" diameter. The step pads are then attached with 5 tek screws (#8-18 x 1/2", stainless steel, bronze plated). This drilling is required for each step pad installed.
No drilling is required. The Mega Steps Brackets attach to existing threaded inserts in the rocker panel interior wall using M8-1.25 x 25mm hex head cap screws with flat and lock washers.
The end caps (item #3) must be tightened to 5 lb ft.
The 5/16" serrated flange nuts (item #5) on the square head screws (item #4) must be tightened to 19 lb ft. These fasteners secure the step to the mounting brackets.
The M8-1.25 x 25mm hex head cap screws that attach the brackets to the rocker panel must be tightened to 19 lb ft. The 5/16" serrated flange nuts that secure the step board to the brackets must also be tightened to 19 lb ft.
The O-MEGA II step extrusions are available in three lengths: 69.0", 75.0", or 85.0". They are aluminum construction and available in silver or black finish. The end caps are 2.95 x 6.70 inches.
The O-MEGA II steps use the following fasteners: 5/16-18 x 1" square head screws (24 qty), 5/16-18 serrated flange nuts (24 qty), and #8-18 x 1/2" tek screws (20 qty) for step pad attachment. The end caps are secured with nuts tightened to 5 lb ft.
The Mega Steps Brackets use M8-1.25 x 25mm zinc-plated hex head cap screws (16 qty) with 5/16" lock washers (16 qty) and 5/16" flat washers (16 qty) for bracket attachment. The step board is secured with 5/16-18 square head screws (8 qty) and 5/16-18 serrated flange nuts (16 qty).
After installation, verify that the step is centered front to rear on the vehicle. Confirm that all fasteners are tightened to the specified torque values: 5 lb ft for end cap nuts and 19 lb ft for the serrated flange nuts securing the step to the mounting brackets. Ensure that the step pads are securely attached with all 5 tek screws per pad.
After installation, verify that the brackets are level and all fasteners are tightened to 19 lb ft. Confirm that the step board is centered front to rear on the cab and that the square head screws are properly located in the bracket slots. Ensure all serrated flange nuts are securely tightened to 19 lb ft.
The O-MEGA II is universal but requires vehicle-specific mounting brackets. The manual includes a fitment guide for Silverado, Sierra, Colorado, Canyon, Avalanche, Suburban, Yukon, Tahoe, RAM, Dodge Dakota, Dodge Durango, Ford F150, Ford Super Duty, Toyota Tundra, and Toyota Tacoma. Confirm your vehicle model and cab style match the guide, then follow your bracket package instructions.
The mounting brackets are not included and must be ordered separately for your specific vehicle. The step board assembly is sold separately for the Mega Steps Brackets. Verify all required parts are on hand before starting installation.
Yes. You must drill 5 holes (1/8" diameter) per step pad using the pad as a guide, then attach with tek screws. No drilling is required for bracket attachment to the vehicle.
Tighten end cap nuts to 5 lb ft and serrated flange nuts (securing step to brackets) to 19 lb ft. For Mega Steps Brackets on Toyota Tundra, tighten bracket fasteners and step board flange nuts to 19 lb ft.
The Step Pad Location Guide provides suggested positions for your vehicle, but pad placement is optional and may be positioned at the purchaser's discretion. Use the guide as a reference and adjust as needed for your application.
Yes. After positioning the step on the brackets with the square head screws in the bracket slots and the step centered front to rear on the cab, you can locate the step in and out as desired before tightening the serrated flange nuts to 19 lb ft.
On Sale Today
Original price was $615.95. Current price is $539.95.You save $76.00 (12%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Aug 24 - Thu, Aug 27
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
