Our in-house experts typically reply within one business day.
Luverne
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Like many LUVERNE side steps and running boards, O-Mega II 6" oval side steps are made to work hard and to do it with style. They are constructed from strong, lightweight, rust-free aluminum, and to truly make them a step up from the rest, we shield them in a highly durable powder coat finish. This ensures maximum corrosion resistance and excellent protection against scuffs and scratches. The side steps are available in two powder coat finish options, including textured black and silver powder coat. O-Mega II side steps are also made to provide safe, comfortable entry and exit from your vehicle. They feature tough aluminum step pads with protruded circular treads that will never wear or crack. The step pads offer a non-skid surface, and they are finished with a textured black powder coat for lasting corrosion resistance. Also unique to our O-Mega II step pads is their customizable positioning. The pads are packaged unattached from the tubes and mount with self-tapping screws. This allows you to precisely match the layout of your vehicle to suit your preferences. You can mount them to the provided factory specifications or adjust them to a custom placement. The 6" x 2-3/4" tubes are fitted with black TPO plastic end caps, adding a modern, professional look. The end caps are also paintable to allow for even further customization. Each set of O-Mega II side steps is designed for vehicle-specific installation and fitment, using a unique set of mounting brackets. This particular set of side steps fits specific years of the Chevy Colorado and GMC Canyon (see application info to verify fitment). NOTE: Mounting brackets are included but ship separately.
LUVERNE O-Mega II 6" oval side steps are made to work hard and to do it with style. They are constructed from strong, lightweight, rust-free aluminum and shielded in a highly durable powder coat finish of textured black or smooth silver.
LUVERNE has manufactured truck accessories in the United States since 1963, specialising in grille guards, running boards, side steps and mud guards for pickups, commercial vans and SUVs. Products are built primarily from stainless steel, aluminium and mild steel, with model-specific mounting kits that use existing frame locations for a bolt-on installation.
LUVERNE has been manufacturing automotive accessories in the United States since 1963, and six decades of continuous production have made it a nationally recognised name in the truck accessory market. Now a Lippert brand, it concentrates on a defined set of products rather than spreading across the whole aftermarket: front-end protection, step access and spray protection for pickup trucks, commercial vans and sport utility vehicles.
Step products are the largest part of the catalog and the range is unusually deep, because the right step depends on the vehicle's ride height, the width of the rocker panel and how often people get in and out. The O-Mega II six-inch oval steps give a wide, flat standing surface in polished stainless or black powder coat, while the Regal 7 seven-inch oval steps go wider still for full-size crew cabs and lifted trucks. The broader running board and side bar range covers round tube, oval and boxed profiles across cab configurations, with treads positioned at the door openings where they are used.
Grille guards protect the front end against impacts, brush and road debris, built in tubular stainless or steel with model-specific brackets that tie into factory frame mounting points. Because the fit is engineered per vehicle, installation is a bolt-on job that does not require drilling or cutting on most applications.
Rounding out the line, LUVERNE mud guards and mud flaps shield rocker panels, paint and following vehicles from stones and road spray, in widths matched to the tyre and fender they sit behind. Material choice runs through everything the brand does: stainless steel where appearance and corrosion resistance matter most, aluminium where weight is the priority, and mild steel with protective coating where strength and value lead. Customers include contractors, fleet operators, van upfitters and truck owners.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
2 compatible vehicles
| Year | Make & Model | Style | Notes |
|---|---|---|---|
| 2015 - 2026 | Chevrolet Colorado | Crew Cab Pickup | — |
| 2015 - 2026 | GMC Canyon | Crew Cab Pickup | — |
Model 571515 is designed specifically for 2015 GM Colorado/Canyon Crew Cab pickup trucks with rocker panel mounting. If you have a different vehicle model or year, you will need a different bracket package. Consult the bracket package instructions for your specific vehicle.
The O-MEGA II 6" Oval Steps are listed as a universal application. However, the manual does not specify which bracket packages are compatible with which vehicle models. You must obtain the bracket package specific to your vehicle and follow the instructions included with that package to mount the brackets correctly.
Each O-MEGA II step kit includes: 2 aluminum extrusions (available in 69.0", 75.0", or 85.0" lengths, in silver or black), 4 step pads (aluminum, black), 4 end caps (plastic), 24 square head bolts (5/16"-18 x 1"), 24 serrated flange nuts (5/16"-18, stainless steel), and 20 TEK screws (#8-18 x 1/2", stainless steel). Verify all parts are present before starting installation.
The model 571515 bracket kit includes: 3 right front/left rear mounting brackets (part 552790), 3 left front/right rear mounting brackets (part 552791), 12 hex bolts (5/16"-18 x 1.00"), 12 flat washers (5/16"), 12 lock washers (5/16"), and 8 U-nuts (5/16"-18). Verify all parts are present before starting installation.
The manual does not specify which tools are required. You will need a drill to create 5 x 1/8" holes for the step pad attachment, and you will need a wrench or socket to tighten the mounting bolts and end cap nuts. Consult the bracket package instructions for your vehicle for any additional tools required.
You will need a wrench or socket to install and tighten the hex bolts. The manual does not specify other tools required. Consult the step board instructions included with your step boards for any additional tools needed.
No. You must attach the step pads (item #2) to the step plates before mounting the steps to the brackets. Position the step pads according to the vehicle model location guide on sheet 2, drill 5 x 1/8" holes using the step pad as a guide, and attach with 5 TEK screws (item #6). Repeat for all step pads before proceeding to install the steps on the mounting brackets.
Step pad position varies by vehicle model. Use the Step Pad Location Guide on sheet 2 to find your vehicle model and the measurements for Pad A and Pad B. The guide includes positions for Silverado, Sierra, Colorado, Canyon, Avalanche, Suburban, Yukon, Tahoe, Ram, Dodge Dakota, Durango, Ford F150, Ford Super Duty, Toyota Tundra, and Toyota Tacoma models. Note that these are suggestions and may be placed at the purchaser's discretion.
Yes. On the left side of the vehicle, remove the plastic body plugs located on the bottom and vertical wall of the rocker panel. Use the first, second, and fourth set of holes back from the front wheel opening. Insert a 5/16"-18 U-nut (item #6) into each hole. Repeat this process for the right side of the vehicle.
Yes. You must drill 5 x 1/8" holes in the step plates using the step pad as a guide. These holes are used to attach the step pads with TEK screws (item #6). This drilling is required before mounting the steps to the brackets.
No. Model 571515 is a no-drill application. The rocker panel already has holes that line up with the bracket holes. You remove the plastic body plugs, insert U-nuts, and install the hex bolts through the existing holes.
The end caps (item #3) must be tightened to 5 lb-ft.
The 5/16" serrated flange nuts (item #5) on the square head screws (item #4) must be tightened to 19 lb-ft.
The 5/16"-18 x 1.00" hex bolts (item #3) must be tightened to 19 lb-ft. Start with the bottom bolts, then tighten the top bolts.
You must drill 5 x 1/8" holes in the step plates. Use the step pad as a guide to position the holes correctly.
1. Verify all parts are on hand. 2. Follow the bracket package instructions for your vehicle to mount the brackets. 3. Position and attach step pads to the step plates using the location guide for your vehicle model, drilling 5 x 1/8" holes and using 5 TEK screws per pad. 4. Install square head bolts into the designated slots in the bottom of the step plates. 5. Install end caps and tighten nuts to 5 lb-ft. 6. Position the step on the mounting brackets so the square head screws are in the bracket slots and the step is centered front to rear. 7. Install 5/16" serrated flange nuts on the square head screws and tighten to 19 lb-ft.
1. Verify all parts are on hand. 2. On the left side, remove plastic body plugs from the rocker panel bottom and vertical wall using the first, second, and fourth set of holes back from the front wheel opening. 3. Insert 5/16"-18 U-nuts into the holes. 4. Position the mounting brackets so the holes line up with the rocker panel holes. 5. Install hex bolts, lock washers, and flat washers finger tight. 6. Repeat steps 2-5 for the right side. 7. Install the step board per its instructions. 8. Tighten mounting bolts to 19 lb-ft, starting with bottom bolts then top bolts.
Position the step so that the square head screws (item #4) are located in the slots of the mounting brackets and the step is centered front to rear on the vehicle. Then install the 5/16" serrated flange nuts (item #5) and tighten to 19 lb-ft.
Tighten the mounting bolts to 19 lb-ft in a specific order: start with the bottom bolts, then tighten the top bolts.
Yes. Install the 5/16"-18 x 1.00" hex bolts (item #3), 5/16" lock washers (item #4), and 5/16" flat washers (item #5) finger tight. After positioning all brackets and repeating for both sides, then tighten the mounting bolts to 19 lb-ft.
Model 571515 is designed for 2015 GM Colorado/Canyon Crew Cab pickup trucks only. For other vehicles, you need a different bracket package.
Yes. You must drill 5 x 1/8" holes in the step plates to attach the step pads with TEK screws.
No. Model 571515 is a no-drill application. The rocker panel has existing holes that align with the bracket.
Tighten the 5/16" serrated flange nuts to 19 lb-ft. End caps must be tightened to 5 lb-ft.
Tighten the hex bolts to 19 lb-ft, starting with bottom bolts then top bolts.
Yes. Attach step pads to the step plates using the location guide for your vehicle model, drill 5 x 1/8" holes, and secure with 5 TEK screws per pad before mounting to brackets.
Yes. Remove plastic body plugs from the rocker panel and insert U-nuts in the first, second, and fourth set of holes back from the front wheel opening on both sides.
On Sale Today
Original price was $604.95. Current price is $530.95.You save $74.00 (12%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Aug 24 - Thu, Aug 27
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
