UWS Gloss Black Aluminum 58" Truck Tool Box with Low Profile TBS-58-LP-BLKUWSOriginal price was $834.95. Current price is $757.95.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
UWS
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Tub Style
Profile
Finish
Angled
Rail
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: BRIGHT ALUMINUM
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
UWS | Tough. Reliable.
7 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2004 - 2012 | Chevrolet Colorado | Extended Cab Pickup | 6'1" Bed | — |
| 1999 - 2005 | Chevrolet Silverado 1500 | Extended Cab Pickup | 6'7" Bed | — |
| 1999 - 2005 | Chevrolet Silverado 1500 | Standard Cab Pickup | 6'7" Bed | — |
| 2007 - 2010 | Ford Explorer Sport Trac | Crew Cab Pickup | 4'2" Bed | — |
| 2004 - 2012 | GMC Canyon | Extended Cab Pickup | 6'1" Bed | — |
| 1999 - 2005 | GMC Sierra 1500 | Extended Cab Pickup | 6'7" Bed | — |
| 1999 - 2005 | GMC Sierra 1500 | Standard Cab Pickup | 6'7" Bed | — |
The UWS Bright Aluminum 58" Crossover Truck Tool Box, Low Profile TBS-58-LP (Part #BHSGTBS-58-LP) fits the following vehicles: 2004-2012 Chevrolet Colorado; 1999-2005 Chevrolet Silverado 1500; 2007-2010 Ford Explorer Sport Trac; 2004-2012 GMC Canyon; 1999-2005 GMC Sierra 1500. Always verify your specific year, make, and model before ordering.
The UWS Bright Aluminum 58" Crossover Truck Tool Box, Low Profile TBS-58-LP (Part #BHSGTBS-58-LP) fits 2004-2012 Chevrolet Colorado models. The 2012 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the UWS Bright Aluminum 58" Crossover Truck Tool Box, Low Profile TBS-58-LP (Part #BHSGTBS-58-LP) is designed to fit the 2004-2012 Chevrolet Colorado.
The UWS Bright Aluminum 58" Crossover Truck Tool Box, Low Profile TBS-58-LP (Part #BHSGTBS-58-LP) fits both short bed and long bed configurations. Check the fitment chart for your specific Chevrolet Colorado configuration.
The UWS Bright Aluminum 58" Crossover Truck Tool Box, Low Profile TBS-58-LP (Part #BHSGTBS-58-LP) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The package includes one crossover truck tool box, one key, one divider tray (not included with all models), two rail pads, two 3-inch J-hooks, two 1/4" washers, and two 1/4" nuts. Note that the divider tray may not be included depending on your specific model.
The tool box is designed to fit across truck bed rails as a crossover style box. Before purchasing, verify that your truck has accessible bed rails and sufficient bed width to accommodate the box. The manual does not specify compatibility by truck model, year or bed length. Contact the manufacturer or your dealer to confirm fitment for your specific vehicle.
You will need a ratchet, socket set, and tape measure. These are the only tools listed as required for installation.
The manual does not explicitly state whether drilling is required. However, it includes a warning to check under your truck bed before drilling to ensure you do not puncture brake lines, fuel lines, electrical wires, fuel tanks or other components. The installation uses J-hooks that insert through bed rail slots and are secured with washers and nuts, suggesting fasteners may align with existing holes. Confirm with your dealer or the manufacturer whether your specific truck requires drilling.
1. Place the tool box in the truck bed and check clearance with the lid open. 2. Attach the adhesive side of the rail pads to the underside of the tool box ends. 3. Place the tool box with the adhered rail pads on top of the truck bed rails. 4. Use a tape measure to ensure the tool box is centered in the truck bed. 5. Open the tool box lid and verify there is clearance between the open lid and the top and back of the cab.
1. Place a J-hook under the lip of the bed rail and insert the threaded end up through the slot. 2. Use only one hole and J-hook assembly on each side of the vehicle. 3. Attach with a washer and nut, snugging the hardware but not fully tightening. 4. Repeat on the other side. 5. Re-measure to ensure the tool box is centered and allows lid clearance when open. 6. Fully tighten all hardware.
The torque specification for 1/4" bolts is 3 ft-lbs. This is a general guideline. If you purchase replacement hardware, use the torque specifications provided with that hardware instead.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, including containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Doing so creates a danger of explosion.
Never exceed the vehicle manufacturer's recommended capacity. The manual does not specify a separate capacity for the tool box itself. Refer to your vehicle's owner manual for the truck bed weight limit.
Yes. The product can reduce your ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product installed.
After installation, ensure all knobs, bolts, screws, straps and locks are firmly secured. Open the tool box lid and verify there is clearance between the open lid and the top and back of the cab. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. With the crossover tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. Periodically lubricate the strikers and locks to ensure optimum performance. Ensure all knobs, bolts, screws, straps and locks are firmly secured before every trip and periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue.
If the strikers are ever out of alignment, simply loosen, adjust and re-tighten them. Periodically lubricate the strikers and locks to ensure optimum performance.
Before drilling into your truck bed, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, etc. Precaution must be taken that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision. After drilling, treat or seal all fasteners and exposed metal in any holes drilled in the vehicle to prevent corrosion.
No. Do not modify this product. Use it only for the purposes for which it was designed. Consult your dealer if you have any questions regarding the installation, operation, use and limits of the product.
No. Do not interfere with factory-installed safety equipment. Ensure the tool box is positioned so it does not obstruct or damage any factory safety systems.
The tool box is designed for trucks with accessible bed rails. Compatibility by truck model, year and bed length is not specified in the manual. Contact the manufacturer or your dealer to confirm fitment for your vehicle.
You need a ratchet, socket set and tape measure. Installation is rated as easy.
The torque specification for 1/4" bolts is 3 ft-lbs. This is a general guideline; if you purchase replacement hardware, use the torque specifications provided with that hardware.
Do not store flammables, explosives or hazardous materials including gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Doing so creates a danger of explosion.
Ensure all fasteners are firmly secured before every trip. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. The manual does not specify a fixed re-tightening interval.
Use mild automotive detergent to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads or wire brushes. For polished or gloss finishes, polish may be used to clear small scratches and scuffs.
On Sale Today
Original price was $695.95. Current price is $631.95.You save $64.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Perry, FLFREE SHIPPING
Estimated delivery Tue, Sep 8 - Thu, Sep 10
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.