Our in-house experts typically reply within one business day.
UWS
Verify Fitment
Select your vehicle to confirm this part fits.
2007 - 2013, 2015 - 2018, 2020 - 2026 Chevrolet Silverado 3500 HD
Confirmed to Fit
2006 - 2010, 2023 - 2024, 2026 - 2027 Ford F-350 Super Duty
Confirmed to Fit
2007 - 2013, 2015 - 2018, 2020 - 2026 GMC Sierra 3500 HD
Confirmed to Fit
2019 - 2026 Ram 1500
Confirmed to Fit
2019 - 2026 Ram 1500
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Tub Style
Profile
Finish
Angled
Rail
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: MATTE BLACK POWDER COAT
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
UWS | Tough. Reliable.
120 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2019 - 2026 | Chevrolet Silverado 1500 | Crew Cab Pickup | 5'10" Bed | — |
| 2007 - 2018 | Chevrolet Silverado 1500 | Crew Cab Pickup | 5'9" Bed | — |
| 2014 - 2026 | Chevrolet Silverado 1500 | Crew Cab Pickup | 6'7" Bed | — |
| 1999 - 2026 | Chevrolet Silverado 1500 | Extended Cab Pickup | 6'7" Bed | — |
| 1999 - 2018, 2022 - 2026 | Chevrolet Silverado 1500 | Standard Cab Pickup | 6'7" Bed | — |
| 1999 - 2013 | Chevrolet Silverado 1500 | Extended Cab Pickup | 8'2" Bed | — |
| 1999 - 2013, 2019 - 2026 | Chevrolet Silverado 1500 | Standard Cab Pickup | 8'2" Bed | — |
| 2022 | Chevrolet Silverado 1500 LTD | Crew Cab Pickup | 5'10" Bed | — |
| 2022 | Chevrolet Silverado 1500 LTD | Crew Cab Pickup | 6'7" Bed | — |
| 2022 | Chevrolet Silverado 1500 LTD | Extended Cab Pickup | 6'7" Bed | — |
| 2022 | Chevrolet Silverado 1500 LTD | Standard Cab Pickup | 8'2" Bed | — |
| 1999 - 2004 | Chevrolet Silverado 2500 | Extended Cab Pickup | 6'7" Bed | — |
| 1999 | Chevrolet Silverado 2500 | Standard Cab Pickup | 6'7" Bed | — |
| 1999 - 2003 | Chevrolet Silverado 2500 | Extended Cab Pickup | 8'2" Bed | — |
| 1999 - 2004 | Chevrolet Silverado 2500 | Standard Cab Pickup | 8'2" Bed | — |
| 2020 - 2026 | Chevrolet Silverado 2500 HD | Crew Cab Pickup | 6'10" Bed | — |
| 2020 - 2026 | Chevrolet Silverado 2500 HD | Extended Cab Pickup | 6'10" Bed | — |
| 2007 - 2019 | Chevrolet Silverado 2500 HD | Crew Cab Pickup | 6'7" Bed | — |
| 2001 - 2013 | Chevrolet Silverado 2500 HD | Extended Cab Pickup | 6'7" Bed | — |
| 2001 - 2026 | Chevrolet Silverado 2500 HD | Crew Cab Pickup | 8'2" Bed | — |
| 2001 - 2013, 2020 - 2026 | Chevrolet Silverado 2500 HD | Extended Cab Pickup | 8'2" Bed | — |
| 2001 - 2026 | Chevrolet Silverado 2500 HD | Standard Cab Pickup | 8'2" Bed | — |
| 2007 | Chevrolet Silverado 2500 HD Classic | Crew Cab Pickup | 8'2" Bed | — |
| 2007 | Chevrolet Silverado 2500 HD Classic | Extended Cab Pickup | 8'2" Bed | — |
| 2007 | Chevrolet Silverado 2500 HD Classic | Standard Cab Pickup | 8'2" Bed | — |
Yes, the UWS Matte Black Aluminum 69" Truck Tool Box with Low Profile TBS-69-LP-MB (Part #BHSGTBS-69-LP-MB) is designed to fit the 2007-2026 Chevrolet Silverado 1500.
The UWS Matte Black Aluminum 69" Truck Tool Box with Low Profile TBS-69-LP-MB (Part #BHSGTBS-69-LP-MB) fits both short bed and long bed configurations. Check the fitment chart for your specific Chevrolet Silverado 1500 configuration.
The UWS Matte Black Aluminum 69" Truck Tool Box with Low Profile TBS-69-LP-MB (Part #BHSGTBS-69-LP-MB) fits the following vehicles: 2007-2026 Chevrolet Silverado 1500; 2022 Chevrolet Silverado 1500 LTD; 1999 Chevrolet Silverado 2500; 2020-2026 Chevrolet Silverado 2500 HD; 2007-2014, 2020-2026 Chevrolet Silverado 3500 HD; 2002-2008 Dodge Ram 1500; 1997-2026 Ford F-150; 2004 Ford F-150 Heritage; 1999-2026 Ford F-250 Super Duty; 1999-2026 Ford F-350 Super Duty; 2023-2026 Ford F-450 Super Duty; 2007-2026 GMC Sierra 1500; 2022 GMC Sierra 1500 Limited; 1999 GMC Sierra 2500; 2020-2026 GMC Sierra 2500 HD; 2020-2026 GMC Sierra 3500 HD; 2004-2015 Nissan Titan; 2019-2026 Ram 1500; 2007-2021 Toyota Tundra. Always verify your specific year, make, and model before ordering.
The UWS Matte Black Aluminum 69" Truck Tool Box with Low Profile TBS-69-LP-MB (Part #BHSGTBS-69-LP-MB) fits 2007-2026 Chevrolet Silverado 1500 models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
The UWS Matte Black Aluminum 69" Truck Tool Box with Low Profile TBS-69-LP-MB (Part #BHSGTBS-69-LP-MB) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The package includes one crossover truck tool box, one key, one divider tray (not included with all models), two rail pads, two 3-inch J-hooks, two 1/4" washers, and two 1/4" nuts. Note that the divider tray is not included with every model variant.
The manual does not specify which truck models or bed styles are compatible. Contact CURT Group at 877-287-8634 or consult your dealer to confirm fitment for your specific vehicle before purchasing.
Yes, but you must verify this during installation. In Step 1, open the tool box lid and ensure there is clearance between the open lid, the top of the cab, and the back of the cab. If clearance is insufficient, the tool box may not be suitable for your truck configuration.
You need a ratchet, socket set, and tape measure. The installation is rated as Easy difficulty.
The manual does not explicitly state whether drilling is required for all installations. However, it includes a warning to check under the truck bed before drilling to avoid puncturing brake lines, fuel lines, electrical wires, or fuel tanks. Contact the manufacturer or your installer to confirm whether drilling is necessary for your specific truck bed configuration.
Place the tool box in the truck bed and use a tape measure to ensure it is centered. Attach the adhesive side of the rail pads to the underside of the tool box ends, then place the tool box with the rail pads on top of the truck bed rails. Verify centering and lid clearance before securing with fasteners.
Place a J-hook under the lip of the bed rail and insert the threaded end up through the slot. Use only one hole and J-hook assembly on each side of the vehicle. Attach with a washer and nut, snug the hardware but do not fully tighten yet. Re-measure to ensure the tool box is centered and allows lid clearance when open, then fully tighten all hardware.
The torque specification for 1/4" bolts is 3 ft-lbs. These specifications are general guidelines; if you purchase replacement hardware, use the torque specifications provided with that hardware.
If the strikers are out of alignment, simply loosen them, adjust to the correct position, and re-tighten. Periodically lubricate the strikers and locks to ensure optimum performance.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks, or cutting torches. Danger of explosion.
Yes. The product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product installed.
Yes. Never exceed the vehicle manufacturer's recommended capacity. The manual does not specify the tool box's own weight capacity; consult your vehicle's owner manual or contact the manufacturer for this information.
Ensure all knobs, bolts, screws, straps and locks are firmly secured before every trip. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. With the crossover tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. Periodically lubricate the strikers and locks to ensure optimum performance.
Before drilling into your truck bed, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, etc. Precaution must be taken that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision. Treat or seal all fasteners and exposed metal in any holes drilled in the vehicle to prevent corrosion.
No. In Step 2, snug the hardware but do not fully tighten it yet. After re-measuring to ensure the tool box is centered and allows lid clearance when open, then fully tighten all hardware.
The manual does not specify compatible models. Contact CURT Group at 877-287-8634 or your dealer to confirm fitment for your truck.
You need a ratchet, socket set, and tape measure. Installation is rated Easy.
The manual does not explicitly state whether drilling is required. Contact the manufacturer to confirm for your specific truck bed.
3 ft-lbs. for 1/4" bolts. Use hardware-specific torque specs if purchasing replacement fasteners.
No. Do not store flammables, explosives, or hazardous materials. Danger of explosion.
Ensure all fasteners are firmly secured before every trip. Periodically re-tighten and inspect all components for wear, corrosion and fatigue.
On Sale Today
Original price was $836.95. Current price is $759.95.You save $77.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Thu, Sep 17 - Sat, Sep 19
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
