UWS Bright Aluminum 66" Crossover Truck Tool Box TBS-66UWSOriginal price was $697.95. Current price is $633.95.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
UWS
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: BRIGHT ALUMINUM
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
6 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 1997 - 2003 | Ford F-150 | Extended Cab Pickup | 6'7" Bed | — |
| 1997 - 2003 | Ford F-150 | Standard Cab Pickup | 6'7" Bed | — |
| 2004 | Ford F-150 Heritage | Extended Cab Pickup | 6'7" Bed | — |
| 2004 | Ford F-150 Heritage | Standard Cab Pickup | 6'7" Bed | — |
| 2017 - 2024 | Nissan Titan | Crew Cab Pickup | 6'7" Bed | — |
| 2016 - 2024 | Nissan TITAN XD | Crew Cab Pickup | 6'7" Bed | — |
On Sale Today
Original price was $697.95. Current price is $597.18.You save $100.77 (14%)
Free Shipping
Ships free on all orders
Authorized Dealer
The package includes one crossover truck tool box, one key, one divider tray (not included with all models), two rail pads, two 3-inch J-hooks, two 1/4-inch washers, and two 1/4-inch nuts. Note that the divider tray is not included with all models, so check your specific package contents.
The manual does not specify which truck models, bed lengths, cab styles or drivetrains are compatible with this tool box. Before purchasing, contact the manufacturer at 877.287.8634 or consult your dealer to confirm fitment for your specific vehicle.
You will need a ratchet, socket set, and tape measure. The manual rates the installation as 'Easy' difficulty.
The manual does not explicitly state whether drilling is required or optional for this model. However, it includes a warning to check under your truck before drilling to ensure the drill location does not puncture brake lines, fuel lines, electrical wires, fuel tanks or other components. Contact the manufacturer at 877.287.8634 to confirm whether drilling is necessary for your specific installation.
Place the tool box in the truck bed and check clearance with the lid open. Attach the adhesive side of the rail pads to the underside of the tool box ends. Place the tool box with the adhered rail pads on top of the truck bed rails. Use a tape measure to ensure the tool box is centered in the truck bed. Open the lid and verify there is clearance between the open lid and the top and back of the cab.
Place a J-hook under the lip of the bed rail and insert the threaded end up through the slot. Use only one hole and J-hook assembly on each side. Attach with a washer and nut. Snug the hardware but do not fully tighten at this stage. Repeat on the other side. After re-measuring to ensure the tool box is centered and lid clearance is correct, fully tighten all hardware.
The manual provides a general torque specification of 3 ft-lbs for 1/4-inch bolts. However, the manual notes that these are general guidelines and recommends using the torque specifications provided with the hardware if purchasing separately. Consult the hardware manufacturer's specifications for the exact torque value for your specific fasteners.
If the strikers are out of alignment, simply loosen them, adjust to the correct position, and re-tighten. Periodically lubricate the strikers and locks to ensure optimum performance.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, such as containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Doing so creates a danger of explosion.
The manual does not specify the weight capacity of the tool box. Never exceed the vehicle manufacturer's recommended capacity. Contact the manufacturer at 877.287.8634 or consult your dealer for the specific weight capacity.
Yes. The product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product installed.
After installation, ensure all knobs, bolts, screws, straps and locks are firmly secured. Verify the tool box is centered in the truck bed and that the lid has proper clearance when open. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. With the crossover tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. Periodically lubricate the strikers and locks to ensure optimum performance.
Before drilling into your truck bed, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, etc. Precaution must be taken that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision. After drilling, treat or seal all fasteners and exposed metal in any holes drilled in the vehicle to prevent corrosion.
No. Never modify this product. Do not use this product for purposes other than those for which it was designed. If you have questions regarding the installation, operation, use and limits of the product, consult your dealer.
The manual does not specify vehicle compatibility. Contact the manufacturer at 877.287.8634 or consult your dealer to confirm fitment for your truck model, bed length and cab style.
You will need a ratchet, socket set, and tape measure. Installation is rated as Easy difficulty.
The manual does not explicitly state whether drilling is required. Contact the manufacturer at 877.287.8634 to confirm. If drilling is needed, check under your truck first to avoid fuel lines, brake lines, electrical wires and fuel tanks.
Do not store flammables, explosives, hazardous materials or hazardous waste such as gasoline, solvents, propane tanks or acetylene tanks. Never exceed your vehicle manufacturer's recommended capacity.
Periodically re-tighten and inspect all mounting hardware for wear, corrosion and fatigue. Lubricate strikers and locks regularly. Clean with mild automotive detergent only; avoid abrasive cleaners and wire brushes.
Yes. The tool box can reduce your ability to see through the rear and side windows. Extra precaution should be taken when driving.
Quick Ship
In stock and ready to ship — order now!
Shipping from Perry, FLFREE SHIPPING
Estimated delivery Sat, Aug 29 - Mon, Aug 31
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.