UWS 75-Gallon L-Shape Bright Aluminum Transfer Tank TT-75-L-T-PUWSOriginal price was $1,462.95. Current price is $1,328.95.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
UWS
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: GLOSS BLACK POWDER COAT
Material: Aluminum
Part Type: TRANSFER TANK
UWS transfer tanks offer the perfect solution for transporting chemicals, solutions and other non-flammable liquids to your next jobsite. Each tank features corrosion-resistant aluminum construction, a commercial-grade ventilation cap and an optimal fit and capacity to suit your truck and lifestyle. The heavy-duty .125" thick aluminum alloy construction provides the tank with structural strength, while keeping it lightweight and resilient to corrosion. The commercial-grade vented cap allows for proper ventilation of the liquid contents, and the tank is also equipped with commercial-grade mounting flanges for maximum strength in the truck bed. UWS transfer tanks are available in multiple sizes to accommodate any job. Like all UWS truck tool boxes, this product is proudly assembled right here in the USA for style and long-lasting dependability. NOTE: This tank is DOT-compliant for transporting Class 3 combustible fuels only, such as diesel.
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
UWS | Tough. Reliable.
The kit includes the transfer tank, filler neck and cap, a 3/8" drain plug, and a key (supplied only with combo models). Hardware such as bolts, washers, nuts and any spacers must be purchased separately.
The tank is DOT-compliant for transporting Class 3 combustible fuels only, such as diesel. It is not approved for flammables such as gasoline, explosives, hazardous materials, hazardous waste, propane tanks, acetylene tanks, cutting torches, or diesel exhaust fluid (DEF) and other corrosive materials. It must never be connected to a vehicle's fuel system or used as an auxiliary fuel tank.
The manual does not specify vehicle make, model, year, bed length or cab style compatibility. Contact CURT Group at 877-287-8634 or consult your dealer to confirm fitment for your specific vehicle.
You will need a drill, 3/8" drill bit, ratchet, socket set, tape measure, and marker. You must also purchase your own hardware: hex bolts, flat washers, lock washers, and nuts for each mounting hole.
Yes. Hardware is not included. You must purchase hex bolts, flat washers, lock washers and nuts for each mounting hole. If any holes fall between the ribs on the truck bed floor, spacers will also be required.
Before drilling into your truck bed, check under your vehicle to ensure the drill location does not puncture, cut or obstruct any brake or fuel fluid lines, electrical wires, fuel tanks, or other components. Precaution must be taken that all fasteners near the fuel tank do not create the possibility of fuel tank puncture or other damage during a collision.
Push the tank up to the truck cab and center it side-to-side. Make sure the tank is fully supported by the truck bed floor. Use the mounting brackets as a guide to mark the hole locations.
Drill 3/8" holes in the marked locations on the truck bed floor. After drilling, treat or seal all fasteners and exposed metal in any holes to prevent corrosion.
No. Do not cut, weld or drill into the tank. Doing so could result in serious injury or death.
Secure the mounting brackets to the truck bed with a hex bolt, two flat washers, one lock washer and one nut in each hole. Do not over tighten the hardware.
If any holes fall between the ribs on the truck bed floor, spacers will be required between the floor and mounting bracket for proper installation. These must be purchased separately.
Before securing the tank to the truck bed, ensure the tank is level. Use a level tool to verify proper positioning before tightening the mounting hardware.
Torque specifications depend on bolt size. For common sizes: 1/4" bolt = 3 ft-lbs, 5/16" bolt = 7 ft-lbs, 3/8" bolt = 16 ft-lbs, 7/16" bolt = 20 ft-lbs, 1/2" bolt = 28 ft-lbs. These are general guidelines; if purchasing hardware, use the torque specifications provided with that hardware. Do not over tighten.
Make sure the transfer tank and pump are grounded to avoid static charge. Static build-up can result in explosion. The manual does not specify the grounding method or connection points; contact CURT Group at 877-287-8634 for detailed grounding instructions.
You must use an automatic shut-off nozzle (not provided) and a fuel filter (not provided). The tank must be vented at all times. Do not pressurize the tank.
Never exceed the vehicle manufacturer's recommended capacity. Consult your vehicle's owner manual or contact your dealer for the maximum safe load capacity for your specific truck bed.
No. The tank is for private use only and is not intended to be used commercially.
No. The tank must be lifted only when empty.
Ensure all knobs, bolts, screws, straps and locks are firmly secured before every trip. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. With the transfer tank installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Yes. This product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product.
The manual does not specify vehicle compatibility. Contact CURT Group at 877-287-8634 or consult your dealer to confirm fitment for your specific vehicle make, model, year and bed length.
No. You must purchase hex bolts, flat washers, lock washers, nuts and any required spacers separately. A 3/8" drill bit is also required.
Yes. You must drill 3/8" holes in the truck bed floor. Before drilling, check under your vehicle to ensure the drill location does not puncture brake lines, fuel lines, electrical wires or fuel tanks.
The tank is DOT-compliant for Class 3 combustible fuels only, such as diesel. It is not approved for gasoline, explosives, hazardous materials, propane, acetylene or DEF. It must never be used as an auxiliary fuel tank.
Torque depends on bolt size: 1/4" = 3 ft-lbs, 5/16" = 7 ft-lbs, 3/8" = 16 ft-lbs, 7/16" = 20 ft-lbs, 1/2" = 28 ft-lbs. Do not over tighten. Use torque specifications provided with purchased hardware.
You must use an automatic shut-off nozzle and a fuel filter (neither provided). The tank must be vented at all times and grounded to avoid static charge. Do not pressurize the tank.
Ensure all bolts, screws and locks are firmly secured before every trip. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue.
On Sale Today
Original price was $1,627.95. Current price is $1,478.95.You save $149.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Sat, Aug 29 - Mon, Aug 31
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 2 items:
$2,058.94$2,207.94
No reviews have been added for this product.