UWS Gloss Black Aluminum 63" Truck Tool Box with Low Profile TBS-63-LP-BLKUWSOriginal price was $834.95. Current price is $757.95.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
UWS
Verify Fitment
Select your vehicle to confirm this part fits.
2019 - 2024 Toyota Tacoma
Confirmed to Fit
2019 - 2023 Toyota Tacoma
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
On Sale Today
Original price was $834.95. Current price is $757.95.You save $77.00 (9%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
Shipping from Lancaster, TXFREE SHIPPING
Estimated delivery Wed, Aug 12 - Fri, Aug 14
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Free Shipping
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Finish: GLOSS BLACK POWDER COAT
Material: Aluminum
Part Type: Crossover
UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our patented RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. This particular truck tool box features a low profile, meaning the lid is built lower than our standard lid. This provides a better view out the rear cab window and additional clearance for other items in the truck bed, if needed. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
UWS designs and builds heavy-duty truck tool boxes and storage for tradespeople and truck owners. The line covers crossover and side-mount boxes, chest boxes, underbody boxes, transfer tanks and dog boxes. Every aluminum box is designed, fabricated and welded in Perry, Florida, with construction aimed at job-site abuse, road vibration and daily use.
UWS is a leading manufacturer and designer of truck tool boxes and truck accessories, and a Lippert brand. The company's focus is narrow and deliberate: storage that stands up to being opened and slammed shut dozens of times a day, loaded past what looks reasonable, and left outdoors in whatever weather the job brings. Its customers are electricians, plumbers, contractors, farmers, outdoorsmen and truck owners who treat a pickup as a working tool rather than transport.
The catalog covers the full range of bed storage. Crossover boxes sit across the bed behind the cab in single-lid, gull-wing, secure-lock and low-profile styles, so there is a fit whether the priority is capacity, rear visibility or working under a tonneau. Side-mount boxes mount along the bed rails and keep the bed floor free for cargo, while underbody boxes tuck beneath the frame rails of service bodies and flatbeds.
Beyond the bed, UWS makes portable chest boxes that move between vehicles and the shop, transfer tanks and combination tank-and-toolbox units for crews working away from fuel supply, and insulated, ventilated dog boxes for hunters and handlers.
Manufacturing sits at the centre of the brand's identity. Every UWS aluminum tool box is designed, fabricated and welded in Perry, Florida, by tradespeople with decades of experience, and the company's Rooted in Trades initiative is built around that connection to skilled manual work. Boxes use heavy-gauge aluminum, continuous welds at the seams, weather stripping to seal against rain and dust, and locking systems intended to resist tampering. The practical result is storage that keeps tools dry, organized and where they were left.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
14 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2017 - 2018 | Chevrolet Colorado | Crew Cab Pickup | 5'2" Bed | — |
| 2015 - 2016 | Chevrolet Colorado | Crew Cab Pickup | 5'3" Bed | — |
| 2015 - 2018 | Chevrolet Colorado | Crew Cab Pickup | 6'2" Bed | — |
| 2009 - 2010 | Dodge Dakota | Extended Cab Pickup | 5'5" Bed | — |
| 2015 - 2018 | GMC Canyon | Crew Cab Pickup | 5'2" Bed | — |
| 2015 - 2018 | GMC Canyon | Crew Cab Pickup | 6'2" Bed | — |
| 2005 | Nissan Frontier | Crew Cab Pickup | 4'11" Bed | — |
| 2006 - 2021 | Nissan Frontier | Crew Cab Pickup | 5' Bed | — |
| 2005 - 2026 | Nissan Frontier | Crew Cab Pickup | 6'1" Bed | — |
| 2005 - 2021 | Nissan Frontier | Extended Cab Pickup | 6'1" Bed | — |
| 2009 - 2012 | Suzuki Equator | Crew Cab Pickup | 5' Bed | — |
| 2009 - 2012 | Suzuki Equator | Crew Cab Pickup | 6'1" Bed | — |
| 2019 - 2024 | Toyota Tacoma | Crew Cab Pickup | 5' Bed | If your model is equipped with a factory bed-rail system, standard box-mounting may not apply. |
| 2019 - 2023 | Toyota Tacoma | Extended Cab Pickup | 6'2" Bed | If your model is equipped with a factory bed-rail system, standard box-mounting may not apply. |
The UWS Gloss Black Aluminum 63" Angled Truck Tool Box, Low Profile TBS-63-A-LP-BLK (Part #BHSGTBS-63-A-LP-BLK) fits 2015-2018 Chevrolet Colorado models. The 2026 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the UWS Gloss Black Aluminum 63" Angled Truck Tool Box, Low Profile TBS-63-A-LP-BLK (Part #BHSGTBS-63-A-LP-BLK) is designed to fit the 2015-2018 Chevrolet Colorado.
The UWS Gloss Black Aluminum 63" Angled Truck Tool Box, Low Profile TBS-63-A-LP-BLK (Part #BHSGTBS-63-A-LP-BLK) fits both short bed and long bed configurations. Check the fitment chart for your specific Chevrolet Colorado configuration.
The UWS Gloss Black Aluminum 63" Angled Truck Tool Box, Low Profile TBS-63-A-LP-BLK (Part #BHSGTBS-63-A-LP-BLK) fits the following vehicles: 2015-2018 Chevrolet Colorado; 2005-2010 Dodge Dakota; 2015-2018 GMC Canyon; 2005-2026 Nissan Frontier; 2009-2012 Suzuki Equator; 2019-2024 Toyota Tacoma. Always verify your specific year, make, and model before ordering.
The UWS Gloss Black Aluminum 63" Angled Truck Tool Box, Low Profile TBS-63-A-LP-BLK (Part #BHSGTBS-63-A-LP-BLK) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The package includes one crossover truck tool box, one key, two rail pads, two 3-inch J-hooks, two 1/4" washers, and two 1/4" nuts. A divider tray is included with some models but not all.
You will need a ratchet, socket set, and tape measure. The installation is rated as Easy difficulty.
The manual does not specify which truck models or bed lengths are compatible with this tool box. Contact CURT Group at 877-287-8634 or consult your dealer to confirm fitment for your specific vehicle.
Place the tool box in the truck bed and use a tape measure to ensure it is centered. Open the lid and check that there is adequate clearance between the open lid and the top and back of the cab before securing it.
The rail pads protect the truck bed rails and reduce movement. Attach the adhesive side of each rail pad to the underside of the tool box ends, then place the tool box with the adhered pads on top of the truck bed rails.
Place a J-hook under the lip of the bed rail and insert the threaded end up through the slot. Use only one J-hook assembly on each side of the vehicle. Attach with a 1/4" washer and 1/4" nut. Snug the hardware but do not fully tighten until you have re-measured to ensure the tool box is centered and the lid has proper clearance. Then fully tighten all hardware.
The manual does not explicitly state whether drilling is required for all installations. However, it warns that before drilling into your truck bed, you must check underneath the vehicle to ensure the drill location does not puncture, cut or obstruct any brake lines, fuel lines, electrical wires, fuel tanks or other components. If drilling is necessary for your truck, take this precaution before proceeding.
For 1/4" bolts (which are used with the J-hooks), apply 3 ft-lbs. of torque. The manual provides general torque guidelines for metric and SAE fasteners, but notes that these are general guidelines. If you purchase additional hardware separately, use the torque specifications provided with that hardware. Always refer to the torque specifications when securing hardware during installation to prevent damage to the product or vehicle.
Do not use this product for storing or transporting flammables, explosives, hazardous materials or hazardous waste, including containers of gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Doing so creates a danger of explosion.
The manual does not specify a weight capacity. You must never exceed the vehicle manufacturer's recommended capacity for your truck bed.
Yes. The product can reduce the driver's ability to clearly see roadways, vehicular or pedestrian traffic and other objects through the rear and side windows of the vehicle, which may cause an accident. Extra precaution should be taken when driving a vehicle with this product installed.
No. Do not interfere with factory-installed safety equipment. Ensure your installation does not obstruct or damage any original equipment on your vehicle.
After installation, ensure all knobs, bolts, screws, straps and locks are firmly secured. Open the lid and verify there is clearance between the open lid and the top and back of the cab. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue. With the crossover tool box installed, periodic inspections should be performed to ensure all mounting hardware remains tight.
For polished, gloss and other smooth finishes, polish may be used to clear small scratches and scuffs. Clean the product with mild automotive detergent. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or other similar products that may damage the finish. Periodically lubricate the strikers and locks to ensure optimum performance. Treat or seal all fasteners and exposed metal in any holes drilled in the vehicle to prevent corrosion.
If the strikers are ever out of alignment, simply loosen them, adjust to the correct position, and re-tighten. Periodically lubricate the strikers and locks to ensure optimum performance.
The manual does not list specific vehicle models or bed lengths. Contact CURT Group at 877-287-8634 or consult your dealer to confirm fitment.
You need a ratchet, socket set, and tape measure. Installation is rated Easy.
The manual does not explicitly state whether drilling is required. If drilling is necessary, you must check underneath your truck first to avoid puncturing brake lines, fuel lines, electrical wires or fuel tanks.
Apply 3 ft-lbs. of torque to 1/4" bolts. These are general guidelines; if you purchase separate hardware, use the torque specifications provided with that hardware.
Do not store flammables, explosives, hazardous materials or hazardous waste, including gasoline, solvents, gun powder, dynamite, propane tanks, acetylene tanks and cutting torches. Danger of explosion.
Ensure all knobs, bolts, screws, straps and locks are firmly secured. Periodically re-tighten and inspect all components for signs of wear, corrosion and fatigue.
Use mild automotive detergent. Do not use dish detergent, abrasive cleaners, abrasive pads, wire brushes or similar products. For polished or gloss finishes, polish may be used to clear small scratches.
No reviews have been added for this product.
