Our in-house experts typically reply within one business day.
Draw-tite
On Sale Today
Original price was $243.75. Current price is $238.69.You save $5.06
Free Shipping
Ships free on all orders
Authorized Dealer
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Verify Fitment
Select your vehicle to confirm this part fits.
FREE ShippingFREE SHIPPING
Estimated delivery Tue, Sep 1 - Fri, Sep 4
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Total for 4 items:
$150.58
These dependable custom hitches are manufactured for 2019-2022 Acura RDX and attach to your vehicle?s frame or bumper for a sleek, clean appearance. Each hitch also has a 1-1/4 inch square receiver tube opening so you can easily attach accessories like a bike rack or cargo carrier, or a utility trailer. DRAW-TITE Class 2 custom trailer hitches come complete with all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. So, whether you are headed out to the campground and need a place for the cooler, taking the bikes to hit the trails in the park, or you are tackling a DIY project (maybe some landscaping or a home repair), choose DRAW-TITE and travel with confidence knowing your setup is connected with the security only DRAW-TITE can provide. DRAW-TITE: North America?s Favorite Hitch.
Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Experts available to answer your questions
Call 888-634-9494The 2019-2022 Acura RDX With +12V Power Provision Draw-tite Class 2 Trailer Hitch, 1-1/4 Inch Square Receiver Bundle w/ Plug-n-Play T-One Wiring Harness (Part #DTB36114-118800) fits the following vehicles: 2008-2010 Acura RDX. Always verify your specific year, make, and model before ordering.
Yes, the 2019-2022 Acura RDX With +12V Power Provision Draw-tite Class 2 Trailer Hitch, 1-1/4 Inch Square Receiver Bundle w/ Plug-n-Play T-One Wiring Harness (Part #DTB36114-118800) is designed to fit the 2008-2010 Acura RDX.
The 2019-2022 Acura RDX With +12V Power Provision Draw-tite Class 2 Trailer Hitch, 1-1/4 Inch Square Receiver Bundle w/ Plug-n-Play T-One Wiring Harness (Part #DTB36114-118800) fits 2008-2010 Acura RDX models. The 2010 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2019-2022 Acura RDX With +12V Power Provision Draw-tite Class 2 Trailer Hitch, 1-1/4 Inch Square Receiver Bundle w/ Plug-n-Play T-One Wiring Harness (Part #DTB36114-118800) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Part number 36114 fits 2019-current Acura RDX models. Visit the Horizon Global website for the most up-to-date information regarding specific application years and trim levels.
Maximum Gross Trailer Weight: 3500 lb. (1589 kg). Maximum Tongue Weight: 350 lb. (159 kg). Do not exceed the lower of your towing vehicle manufacturer's rating or these limits.
Required tools: ratchet, prybar, torque wrench, safety glasses, 19 mm sockets, 6-inch socket extension, and exhaust removal pliers.
Yes. You must lower the spare tire using the vehicle's lowering tools and mechanism (consult your vehicle owner's manual) and set it aside before installation. It is reinstalled after the hitch is mounted.
Yes. Using exhaust removal pliers or a prybar, remove the rubber exhaust hangers from in front of and behind the muffler. Support the exhaust to prevent damage. Reinstall after the hitch is mounted.
All M12 fasteners must be tightened to 42 lb-ft (57 N·m) using a torque wrench.
Always wear safety glasses when installing the hitch. Observe safety precautions when working beneath the vehicle and wear eye protection.
Check the hitch frequently to ensure all fasteners and the ball are properly tightened. Proper torque is needed to keep the hitch secure to the vehicle when towing.
The part numbers are 36114, 06193, and CQT36114. These are equivalent part numbers for the same hitch receiver.
No. Hitch 36114 is a weight-carrying hitch only. Weight-distributing capacity is listed as n/a. If you need weight-distributing capability, you will need a different hitch model.
The fastener kit 36114F includes: (4) Hex Bolts M12 x 1.25 x 40mm Class 10.9, and (4) Conical Washers 1/2" (Part No. 01292008). The conical washers must be installed with the teeth side facing toward the hitch.
Install the conical washers with the teeth side facing toward the hitch. The washers are part of the fastener kit 36114F and must be positioned correctly to ensure proper load distribution and fastener security.
The hitch attaches to the rearmost weldnuts on each side of the frame rail. Align the attachment holes to these weldnuts and install the supplied bolts and conical washers into them. The weldnuts must be clear of rust and debris before installation.
Before installation, make sure the weldnuts are clear from rust and debris. Clean them if necessary to ensure proper fastener engagement and secure mounting.
1. Lower the spare tire and set aside. 2. Lower the exhaust by removing rubber hangers from in front of and behind the muffler, supporting the exhaust. 3. Raise the hitch into position, aligning attachment holes to the rearmost weldnuts on each side of the frame rail, and install bolts and conical washers (teeth side toward hitch). 4. Tighten all M12 fasteners to 42 lb-ft (57 N·m). 5. Raise the exhaust back into position and reinstall all hangers. 6. Reinstall the spare tire.
No drilling is required. The hitch attaches to existing weldnuts on the vehicle frame. Do not cut access or attachment holes with a torch.
No. Do not cut, weld, or modify this receiver. Doing so will compromise the hitch integrity and safety.
The maximum tongue weight is 350 lb. (159 kg). Do not exceed this limit or the lower of your towing vehicle manufacturer's rating.
If excess sway occurs, take your foot off the gas pedal and hold the steering wheel as steady as possible. Do not apply your brakes and do not speed up.
Load the trailer heavier in front. This helps maintain proper weight distribution and improves towing stability.
If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes.
A hitch or ball which has been damaged should be removed and replaced. Do not attempt to repair a damaged hitch.
The authorized drawbar kit is part number 36051 (sold separately). The drawbar must be used in the RISE position only.
Always wear your seatbelt. Slow down when towing and never exceed any posted speed limit. Always read and follow all warnings and instructions for your vehicle and other accessories you will use with the hitch before use.
Check the hitch frequently, making sure all fasteners and the ball are properly tightened. Periodically verify that all fasteners are tight and the hitch is securely mounted to your vehicle.
Horizon Global Americas Inc. provides a Limited Lifetime Warranty to the original consumer purchaser. The product is warranted to be free from material defects in both material and workmanship, ordinary wear and tear excepted. The warranty is valid only if products are installed, maintained, and used in accordance with the instructions, and any alleged defects have not been caused by misuse, neglect, wear and tear, improper installation, unsuitable storage, improper repair, alteration, or accident. Product replacement is the sole and exclusive remedy. For warranty claims, contact Horizon Global at 47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, or TechnicalSupport@horizonglobal.com.
Hitch 36114 complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684.
Fasteners may loosen if they were not torqued to the correct specification (42 lb-ft / 57 N·m) or if they were not checked periodically. Proper torque is needed to keep the hitch secure to the vehicle when towing. Check all fasteners frequently and retighten if necessary.
Ensure the weldnuts are clear of rust and debris, as buildup can prevent proper alignment. Clean the weldnuts thoroughly. If alignment issues persist, verify you are using the rearmost weldnuts on each side of the frame rail, as specified in the installation instructions.
Use exhaust removal pliers or a prybar to carefully remove the rubber exhaust hangers from in front of and behind the muffler. Be sure to support the exhaust to prevent damage during removal. If hangers are stuck, apply gentle pressure and work them free gradually.
The T-One T-Connector (part number 118800-037) is shown to fit the Acura RDX in the manual. However, the manual does not provide a complete list of compatible vehicles. Before purchasing, verify that your vehicle has an 8-pin connector located behind the rear interior trim panel and confirm the presence of two separate red wires in that connector. If your vehicle has only one red wire, you will need part number 118804 instead.
If your vehicle's 8-pin connector has only one red wire, the T-One part number 118804 is required instead of the 118800. Before installation, inspect the wires going into the vehicle's 8-pin connector and confirm the presence of two separate red wires. If only one red wire is present, do not proceed with the 118800 installation.
You will need: trim panel remover, 10mm socket and ratchet or 10mm wrench, drill with 3/32" drill bit, 1/4" socket, wire crimpers, wire cutters, Phillips head screwdriver, and test-probe. These tools are required for trim removal, grounding, and electrical testing.
You must remove the lower interior trim panels on the driver's side only. The manual also requires temporary removal of the rear hatch, rear threshold plate, privacy screen, storage covers, and floor covering to access the 8-pin connector located behind the rear interior trim panel. Be careful not to damage clips when removing panels, and set aside all fasteners and removed items.
Drilling may be required depending on your grounding method. If you use Option 1 (existing ground stud on driver's side), no drilling is needed—you loosen the bolt, place the screw eyelet on the stud, and re-tighten. If you use Option 2 (new grounding point), you must drill a 3/32" hole near the connector in the vehicle's frame or crossmember. Do not drill into the vehicle floor or bed. Always verify what is behind any surface before drilling to avoid damage to the vehicle or personal injury.
If using Option 2 grounding, drill a 3/32" hole in the vehicle's frame or crossmember near the connector. Do not drill into the vehicle floor or bed. Clean dirt and rustproofing from the area before drilling, and verify what is behind the surface to avoid damage to the vehicle or personal injury.
The vehicle's 8-pin connector is located behind the rear interior trim panel. To access it, open the rear hatch, temporarily remove the rear threshold plate, privacy screen, storage covers, and floor covering. Open the rear door and fold the rear seat forward. Then partially remove the lower interior trim panels on the driver's side only. The 8-pin connector will be visible behind these panels.
You have two options. Option 1: On the driver's side, locate the existing ground stud, loosen the bolt, place the screw eyelet on the stud, and re-tighten the bolt. Make sure all other ground connections are secure when removing and reattaching the ground stud. Option 2: Locate a suitable grounding point near the connector such as the vehicle's frame or crossmember, clean the area, drill a 3/32" hole, and secure the white wire using the eyelet and screw provided. Do not drill into the vehicle floor or bed.
Mount the black box-module on a flat surface in an out-of-the-way place to prevent damage or rattling. The exact location is not specified in the manual, but it should be positioned to avoid interference with vehicle operation and to protect it from damage.
Secure the remainder of the harness with the cable ties provided to prevent damage or rattling. Be careful to avoid any areas that would pinch, cut, or melt the wire. When reinstalling trim panels, be careful not to pinch or cut the wires. Do not pinch the harness in the door latch.
Store the 4-flat connector in the rear cargo area when not in use. When in use, pull the 4-flat connector through the door and close the door. Be careful not to pinch the harness in the door latch.
The ground wire is white. It is secured using the eyelet and screw provided, either to an existing ground stud or to a new grounding point drilled in the vehicle's frame or crossmember.
The vehicle's 8-pin connector provides +12V power provisions. The manual requires inspection of this connector to confirm the presence of two separate red wires before installation. These red wires supply power to the T-One T-Connector system.
The manual does not state the specific amperage rating for the 118800. However, the manual clearly states: DO NOT exceed the lower of the towing manufacturer rating (including in your vehicle owner's manual) or the specific amperage ratings stated on the product itself. Check the product label and your vehicle's owner's manual for the exact amperage rating.
Always wear safety glasses and use all safety precautions during installation. Read and follow all warnings and instructions included with the product before beginning installation. Do not exceed the towing manufacturer rating or product amperage ratings, as overloading circuits can cause fires. Read, understand, and follow all warnings and instructions printed on the tow vehicle's battery. Verify what is behind any surface before drilling to avoid damage to the vehicle or personal injury.
All connections must be complete for the T-One T-Connector to function properly. Test and verify the installation with a test light or trailer once installed. For the initial test, reset the vehicle electrical system by temporarily removing the key from the ignition. Use a test-probe to verify proper electrical connections.
After reinstalling the plastic trim panels, threshold, storage covers, floor covering, and other items removed during installation, verify that you have not pinched or cut any wires. Ensure the harness is properly secured with cable ties and that no wires are exposed or at risk of damage. Perform the electrical test described in the installation instructions.
The 118800 fits the Acura RDX and vehicles with an 8-pin connector behind the rear interior trim panel containing two separate red wires. If your vehicle has only one red wire, you need part 118804 instead. Verify your vehicle's connector before purchasing.
You need: trim panel remover, 10mm socket/ratchet or wrench, 3/32" drill bit, 1/4" socket, wire crimpers, wire cutters, Phillips screwdriver, and test-probe.
Drilling is optional. If you use the existing ground stud on the driver's side (Option 1), no drilling is needed. If you create a new ground point (Option 2), you drill a 3/32" hole in the vehicle's frame or crossmember—never in the floor or bed.
The 8-pin connector is behind the rear interior trim panel on the driver's side. Access it by opening the rear hatch, removing the rear threshold plate, privacy screen, storage covers, and floor covering, then partially removing the lower interior trim panels.
The ground wire is white. Secure it to either an existing ground stud or a new 3/32" hole drilled in the vehicle's frame using the provided eyelet and screw.
The manual does not state the specific amperage rating. Check the product label and your vehicle's owner's manual. Do not exceed the lower of the towing manufacturer rating or the product's stated amperage rating.
Test with a test light or trailer once all connections are complete. Reset the vehicle electrical system by temporarily removing the ignition key. Use a test-probe to verify proper electrical connections.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2010 | Acura RDX | With +12V Power Provision |
No reviews have been added for this product.
