2019-2024 Toyota RAV4 Draw-Tite Class 3 Trailer Hitch, 2 Inch Square Receiver Bundle w/ Plug-n-Play T-One Wiring HarnessDraw-titeIn Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.
2019 - 2024 Honda Passport
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
These durable custom hitches are manufactured for 2019-2023 Honda Passport and attach to your vehicle?s frame or bumper for a sleek, clean appearance. Each hitch also has a 2 inch square receiver tube opening ? the most common and versatile on the market - allowing you to attach accessories like a bike rack or cargo carrier, or hook up your pop-up, boat trailer, or utility trailer. The options are endless! DRAW-TITE Class 4 Custom Trailer Hitches come complete with all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. So, whether you are headed out to the campground, the lake, or the bike trails, or you are tackling a project at home and need to haul the materials home, choose DRAW-TITE and travel with confidence knowing your setup is connected with the security only DRAW-TITE can provide. DRAW-TITE: North America?s Favorite Hitch
Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2019 - 2024 | Honda Passport | — |
Yes, the 2019-2024 Honda Passport Draw-Tite Class 4 Trailer Hitch, 2 Inch Square Receiver Bundle w/ Plug-n-Play T-One Wiring Harness (Part #DTB76290-118809) is designed to fit the 2019-2024 Honda Passport.
The 2019-2024 Honda Passport Draw-Tite Class 4 Trailer Hitch, 2 Inch Square Receiver Bundle w/ Plug-n-Play T-One Wiring Harness (Part #DTB76290-118809) fits 2019-2024 Honda Passport models. The 2024 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2019-2024 Honda Passport Draw-Tite Class 4 Trailer Hitch, 2 Inch Square Receiver Bundle w/ Plug-n-Play T-One Wiring Harness (Part #DTB76290-118809) fits the following vehicles: 2019-2024 Honda Passport. Always verify your specific year, make, and model before ordering.
The 2019-2024 Honda Passport Draw-Tite Class 4 Trailer Hitch, 2 Inch Square Receiver Bundle w/ Plug-n-Play T-One Wiring Harness (Part #DTB76290-118809) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The part numbers are 76290, 84290, or CQT76290. These are equivalent part numbers for the same hitch receiver product.
Yes, this hitch is designed for 2019-Current Honda Passport models. Visit the manufacturer's website at www.horizonglobal.com for the most up-to-date information regarding specific application years and trim levels.
Part number 76290 (also sold as 84290 or CQT76290) is designed for 2019-Current Honda Passport models. For the most current information on specific trim levels and model years, visit www.horizonglobal.com or contact technical support at 800-632-3290.
Maximum gross trailer weight is 6000 lb (2724 kg) for weight carrying, or 8000 lb (3632 kg) for weight distributing. Maximum tongue weight is 900 lb (409 kg) for both types. Do not exceed the lower of the towing vehicle manufacturer's rating or these limits.
Required tools are: ratchet, torque wrench, safety glasses, and 21 mm sockets. A 6 inch socket extension is also shown in the hitch illustration. An M14x1.5 tap is needed only if the frame rail weldnuts require cleaning.
Fastener kit 76290F includes 6 M14x1.5x45 CL10.9 bolts and 6 conical washers (5/8 inch, part 01292010). These are the only fasteners required for installation.
Yes. Before installation, remove any stickers or plugs covering the weldnuts on the frame rails on both sides. Make sure the weldnuts are free from rust and debris. Use an M14x1.5 tap to clean the weldnuts if necessary.
1. Clean weldnuts: Remove stickers or plugs covering weldnuts on frame rails (both sides). Ensure weldnuts are free from rust and debris. Use M14x1.5 tap if necessary. 2. Install hitch: Raise hitch into position, align holes in hitch bracket to frame rail weldnuts, and loosely install the supplied M14 bolts and conical washers. 3. Tighten all M14 fasteners with torque wrench to the specified torque value.
No. During step 2, loosely install the M14 bolts and conical washers. Tighten all fasteners to the specified torque value only in step 3 using a torque wrench.
All M14 fasteners must be tightened to 89 Ft.Lb. (121 N*M) using a torque wrench. Proper torque is essential to keep the hitch securely mounted to the vehicle when towing.
The bolts are M14x1.5x45 CL10.9 grade. Six bolts are included in fastener kit 76290F.
The conical washers are 5/8 inch, part number 01292010. Six washers are included in fastener kit 76290F. The teeth side of the washer must face against the hitch.
The teeth side of the conical washer must face against the hitch. This orientation is shown in Figure 1 of the installation instructions.
Always wear safety glasses when installing the hitch. Observe safety precautions when working beneath a vehicle and wear eye protection.
No. Do not cut access or attachment holes with a torch. This is a safety requirement stated in the installation instructions.
A damaged hitch or ball must be removed and replaced. Do not continue to use a damaged hitch.
Check the hitch frequently to ensure all fasteners and the ball are properly tightened. The manual emphasizes periodic checking but does not specify an exact interval.
If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes.
The maximum tongue weight is 900 lb (409 kg) for both weight carrying and weight distributing hitch types.
Load the trailer heavier in front. This helps maintain proper weight distribution and towing stability.
If excess sway occurs, take your foot off the gas pedal and hold the steering wheel as steady as possible. Do not apply your brakes and do not speed up.
Yes. Slow down when towing and never exceed any posted speed limit. Always wear your seatbelt when towing.
No. Do not cut, weld, or modify this receiver. Modifications are not permitted and will compromise the safety and integrity of the hitch.
This hitch is covered by a Limited Lifetime Warranty from Horizon Global. The warranty covers material defects in materials and workmanship, excluding ordinary wear and tear. The warranty is valid only if products are installed, maintained, and used in accordance with the manufacturer's instructions. To make a warranty claim, contact Horizon Global at 47912 Halyard Drive, Suite 100, Plymouth, MI 48170, or call 1-800-632-3290. Product replacement is the sole and exclusive remedy under this warranty.
Contact Horizon Global technical support at: Phone: 800-632-3290, Email: TechnicalSupport@horizonglobal.com, Website: www.horizonglobal.com. For step-by-step photo installation instructions, scan the QR code on the manual or visit http://qr.towingproducts.net/qrproducts/qr-product.
The average installation time is 20 minutes for professional installers. If you do not feel comfortable performing the installation on your own or are in need of assistance, contact a professional installer.
Installation is designed to take approximately 20 minutes for professional installers. If you do not feel comfortable performing the installation yourself or need assistance, contact a professional installer.
Yes, the T-One® Connector (118809-037) is designed for Honda Passport vehicles. The vehicle must have a factory tow-plug connector on the driver's side of the cargo area.
The T-One® Connector package includes: the T-One® Connector harness with black box module, a 20 amp fuse, cable ties for securing the harness, an eyelet and screw for grounding the white wire, and a 4-Flat connector. The package also includes these installation instructions.
Required tools are: trim panel remover, 10 mm and 8 mm socket and ratchet (or 10 mm and 8 mm wrench), drill with 3/32" drill bit, wire crimpers, wire cutters, Phillips head screwdriver, and test probe.
The manual does not specify whether the battery must be disconnected. Contact the manufacturer or consult your vehicle's owner's manual for guidance on electrical work safety.
Open the rear tailgate. Inside the rear cargo area, temporarily remove all floor coverings and cargo trays. On the driver's side, remove the cargo bin, cargo hooks (using an 8 mm socket and Phillips screwdriver), and side panel to access the mating tow-plug connector.
Locate the mating tow-plug connector on the driver's side of the cargo area (after removing the cargo bin, cargo hooks, and side panel). Insert the T-One® Connector harness into the vehicle's tow-plug harness and lock it into place. Ensure all connector surfaces are clean and free of dirt, and verify that connectors are fully inserted with locking tabs in place. Be careful not to damage the locking tabs.
Yes, drilling is required. You must drill a 3/32" hole to secure the white ground wire using the eyelet and screw provided. However, you may avoid drilling if an existing ground stud is available near the connector. Before drilling, verify what is behind the surface to avoid damage to the vehicle or personal injury. Do not drill into the vehicle floor, bed, or any exposed surfaces.
Mount the black box module on a flat surface in an out-of-the-way location to prevent damage or rattling. The exact location is not specified in the manual; choose a secure, accessible spot in the cargo area.
Secure the remainder of the T-One® Connector harness with the cable ties provided to prevent damage or rattling. Route the harness carefully to avoid any areas that would pinch, cut, or melt the wire. Route the 4-Flat connector from below the driver's side trim panel into the rear storage compartment.
The T-One® Connector uses a 20 amp fuse. This fuse must be inserted into position #11 (labeled 20A Trl Charge) in the vehicle's fuse box, located on the driver's side near the rear of the firewall. A 20 amp fuse is included in the package.
The fuse box is located on the driver's side of the vehicle, near the rear of the firewall. Open the vehicle hood to access it. Unlatch the fuse door to access the fuse area.
Route the 4-Flat connector through the driver's side trim panel into the storage compartment on the threshold and store it there when not in use.
After installation, verify that: all connector surfaces are clean and fully inserted with locking tabs in place; the white ground wire is securely fastened with the eyelet and screw; the black box module is mounted securely on a flat surface; the harness is secured with cable ties and routed to avoid pinching, cutting, or melting; the 20 amp fuse is installed in position #11 of the fuse box; all trim panels, threshold, storage covers, and floor coverings are reinstalled without pinching or cutting wires; and the 4-Flat connector is stored in the threshold storage compartment.
Do not exceed the lower of: the towing manufacturer rating stated in your vehicle's owner's manual, or the specific amperage ratings stated on the T-One® Connector product. Overloading circuits can cause fires. Consult your vehicle's owner's manual and the product documentation for the exact ratings.
Always wear safety glasses during installation. Follow all warnings and instructions included with the product. Read and understand all warnings and instructions printed on the tow vehicle's battery. Do not exceed the stated product ratings or towing manufacturer rating. Verify what is behind any surface before drilling to avoid damage to the vehicle or personal injury. Be careful not to pinch, cut, or melt wires during routing and securing.
Yes, the T-One® Connector is designed for Honda Passport vehicles with a factory tow-plug connector.
You need: trim panel remover, 10 mm and 8 mm socket/ratchet (or wrench), drill with 3/32" bit, wire crimpers, wire cutters, Phillips screwdriver, and test probe.
A 20 amp fuse must be installed in position #11 (20A Trl Charge) of the vehicle's fuse box. The fuse is included in the package.
Do not exceed the lower of the towing manufacturer rating in your vehicle's owner's manual or the amperage ratings stated on the product. Consult both documents for the exact limit.
Open the rear tailgate, remove floor coverings and cargo trays from the cargo area, and remove the cargo bin, cargo hooks, and side panel on the driver's side to access the tow-plug connector.
Total for 4 items:
$134.54$137.05
On Sale Today
You save $48.34 (13%)
Free Shipping
Ships free on all orders
Authorized DealerFREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 29 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.