Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2024-2025 Hyundai Kona EV or N Line only
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Hyundai Kona N-Line and EV (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2024, 2025 Hyundai Kona EV or N Line only Class 3 Trailer Hitch, 2" Receiver, Select Hyundai Kona N-Line, EV
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2024 - 2025 | Hyundai Kona | EV or N Line only |
The 2024-2025 Hyundai Kona EV or N Line only CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13608-001) fits 2024-2025 Hyundai Kona models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
The 2024-2025 Hyundai Kona EV or N Line only CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13608-001) fits the following vehicles: 2024-2025 Hyundai Kona. Always verify your specific year, make, and model before ordering.
Yes, the 2024-2025 Hyundai Kona EV or N Line only CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13608-001) is designed to fit the 2024-2025 Hyundai Kona.
The 2024-2025 Hyundai Kona EV or N Line only CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13608-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The CURT 13608 has a gross trailer weight (GTW) capacity of 2,000 lbs and a tongue weight (TW) capacity of 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes, CURT 13608 fits Hyundai Kona EV models. Installation requires trimming of the rearmost underbody bumper panel using a rotary tool. The trim cutout is approximately 4-1/2" wide by 4" tall, as shown in the trim diagram on page 4.
Yes, CURT 13608 fits Hyundai Kona gasoline models. Gasoline models with an exhaust require lowering of the exhaust during installation by removing the two rearmost exhaust hanger rods from both sides from their rubber isolators. The exhaust is reinstalled after the hitch is mounted.
Required tools are: ratchet, 10mm socket, 14mm socket, 17mm socket, 6" socket extension, torque wrench, flathead screwdriver, rotary tool, tape, and tape measure. A tools reference guide is available at curtmfg.com/trailer-hitch-installation.
The kit includes six M10-1.25 x 40mm Class 8.8 hex bolts and six 3/8" conical-toothed washers. These bolts and washers are installed into the vehicle's existing weld nuts on the frame.
The manual does not specify whether battery disconnection is required. Contact CURT product support at 877.287.8634 for clarification.
The installation is rated as moderate difficulty. The manual does not specify whether professional installation is required or recommended. Contact CURT product support at 877.287.8634 if you have concerns about your ability to complete the installation.
Yes. If your vehicle has an exhaust, you must place a support stand under the exhaust to prevent damage to the vehicle when the exhaust hanger rods are removed during installation.
To remove debris from the weld nuts in the frame, spray lubricant or compressed air into the hole. For heavy debris, use a wire brush. Take care not to damage the threads.
No drilling is required. The hitch uses the vehicle's existing weld nuts on the frame. However, Kona EV models require trimming of the rearmost underbody bumper panel using a rotary tool. The trim cutout is approximately 4-1/2" wide by 4" tall.
The trim cutout for the rearmost underbody bumper panel on Kona EV models is approximately 4-1/2" wide by 4" tall. Use a tape measure, tape, and rotary tool to mark and trim the panel.
Torque the six M10 bolts to 33.4 ft-lbs using a torque wrench, 17mm socket, and extension if needed.
For Kona EV models: (1) Detach the frontmost underbody panel by unscrewing two 10mm hex nuts and pull it down. (2) Remove six plastic clips and unscrew four 14mm plastic hex nuts from the rearmost underbody panel, then pull it down. (3) Mark and trim the rearmost panel using a rotary tool (approximately 4-1/2" × 4"). (4) Raise the hitch into position. (5) Install six M10 bolts and conical-toothed washers into the frame weld nuts using a 17mm socket. (6) Torque bolts to 33.4 ft-lbs. (7) Reinstall the panels, clips, and nuts in reverse order.
For gasoline models with exhaust: (1) Lower the exhaust by removing the two rearmost exhaust hanger rods on both sides from their rubber isolators. Place a support stand under the exhaust. (2) Raise the hitch over the exhaust on the passenger side first. Gently pull the bumper facia rearward if needed. (3) Install six M10 bolts and conical-toothed washers into the frame weld nuts using a 17mm socket. (4) Torque bolts to 33.4 ft-lbs. (5) Reinstall the exhaust onto the hanger rods in reverse.
Remove the two rearmost exhaust hanger rods on both sides from their rubber isolators. If exhaust hanger removal pliers are not available, use a 5/8" open end wrench: slide the wrench up to the rubber isolator, cradling the hanger rod. Place the flat edge of a pry bar between the wrench and the hanger stop or hanger rod, then rotate the pry bar toward the wrench to remove the rubber isolator. Using lubricant or soapy water on the hanger rod and isolator helps removal.
The conical-toothed washers are installed with the conical teeth facing the vehicle frame. See the Conical Toothed Washer Orientation diagram on page 2 for the correct positioning.
Safety glasses should be worn at all times while installing this product. If your vehicle has an exhaust, place a support stand under the exhaust to prevent damage to the vehicle when the hanger rods are removed. Never exceed your vehicle manufacturer's recommended towing capacity.
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure. The manual does not specify the inspection interval. Contact CURT product support at 877.287.8634 for recommended inspection frequency.
The manual specifies that bolts should be torqued to 33.4 ft-lbs during installation but does not specify whether retorque is required at a later interval. Contact CURT product support at 877.287.8634 for retorque recommendations.
Yes, CURT 13608 fits Hyundai Kona gasoline and EV models. Gasoline models may require exhaust lowering; EV models require underbody panel trimming.
You need a ratchet, 10mm/14mm/17mm sockets, 6" socket extension, torque wrench, flathead screwdriver, rotary tool, tape, and tape measure.
Torque the six M10 bolts to 33.4 ft-lbs using a torque wrench and 17mm socket.
Gross trailer weight capacity is 2,000 lbs; tongue weight capacity is 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity.
Yes, place a support stand under the exhaust when removing the hanger rods to prevent vehicle damage.
Installation is rated as moderate difficulty. Proper tools and careful attention to the sequence are required. Contact CURT at 877.287.8634 if you have concerns about your ability to complete the installation.
On Sale Today
Original price was $436.85. Current price is $325.71.You save $111.14 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 27 - Wed, Sep 30
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.