Our in-house experts typically reply within one business day.
CURT
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
This fits: 2024-2025 Hyundai Kona Excluding N Line or EV
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Hyundai Kona (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2" receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Not compatible for use with vertical hanging bicycles (bike racks that require the bicycles to be hung / mounted vertically)
Includes installation hardware
2024, 2025 Hyundai Kona Excluding N Line or EV Class 3 Trailer Hitch, 2" Receiver, Select Hyundai Kona
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-94941 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2024 - 2025 | Hyundai Kona | Excluding N Line or EV |
The 2024-2025 Hyundai Kona Excluding N Line or EV CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13606-001) fits the following vehicles: 2024-2025 Hyundai Kona. Always verify your specific year, make, and model before ordering.
The 2024-2025 Hyundai Kona Excluding N Line or EV CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13606-001) fits 2024-2025 Hyundai Kona models. The 2025 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the 2024-2025 Hyundai Kona Excluding N Line or EV CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13606-001) is designed to fit the 2024-2025 Hyundai Kona.
The 2024-2025 Hyundai Kona Excluding N Line or EV CURT Class 3 Trailer Hitch, 2" Receiver + 2" Ball + 1-7/8" Ball Kit (Part #CHD-13606-001) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
The manual does not specify which vehicle makes, models, years or configurations this hitch is designed for. Contact CURT product support at 877.287.8634 or visit curtmfg.com to confirm fitment for your specific vehicle.
The CURT 13606 has a gross trailer weight (GTW) capacity of 2,000 lbs and a tongue weight (TW) capacity of 200 lbs. Never exceed your vehicle manufacturer's recommended towing capacity, as that is the limiting factor.
You will need a ratchet, 17mm socket, torque wrench, and 6-inch socket extension. A 5/8" open-end wrench and pry bar are helpful for exhaust hanger removal if you do not have exhaust hanger removal pliers. Safety glasses are required.
The kit includes six M10 hex bolts and six conical-toothed washers (3/8"). All fasteners are installed into existing vehicle weld nuts on the frame.
Yes. Lowering the exhaust is required. You must remove the two rear-most exhaust hanger rods on both sides from their rubber isolators before raising the hitch into position, then reinstall them after the hitch is bolted down.
Panel trimming may be required, but it is dependent on your vehicle model and trim level. The manual does not specify which vehicles require trimming. Contact CURT product support at 877.287.8634 to confirm whether trimming is needed for your vehicle.
No drilling is mentioned in the installation manual. The hitch uses six existing vehicle weld nuts on the frame for mounting.
Use exhaust hanger removal pliers if available. If not, use a 5/8" open-end wrench and a pry bar: slide the wrench up to the rubber isolator, cradling the hanger rod. Place the flat edge of the pry bar between the wrench and the hanger stop or rod, then rotate the pry bar toward the wrench. Using lubricant or soapy water on the hanger rod and isolator helps removal.
Spray lubricant or compressed air into the weld nut holes to remove debris. For heavy debris, use a wire brush. Take care not to damage the threads.
The conical-toothed washers must be oriented with the teeth facing the vehicle frame. The assembly diagram on page 2 shows the correct orientation.
All six M10 bolts must be torqued to 33.4 ft-lbs using a torque wrench, 17mm socket, and extension if needed.
You may need to gently pull the bumper facia rearward to raise the hitch into position, but this is only if needed. The manual indicates this is conditional based on your vehicle.
1. Lower the exhaust by removing the two rear-most exhaust hanger rods on both sides from their rubber isolators. Support the exhaust with a stand. 2. Raise the hitch over the exhaust on the passenger side first if applicable, gently pull the bumper facia rearward if needed, and install the six M10 bolts and six conical-toothed washers into the vehicle weld nuts. Torque all bolts to 33.4 ft-lbs. 3. Reinstall the exhaust hanger rods.
Wear safety glasses at all times during installation. When lowering the exhaust, use a stand to support it and prevent damage. Never exceed your vehicle manufacturer's recommended towing capacity when using the hitch.
Perform a periodic inspection to ensure all mounting hardware remains tight and structural components are secure. The manual does not specify the inspection interval.
On Sale Today
Original price was $436.85. Current price is $325.71.You save $111.14 (25%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sun, Sep 27 - Wed, Sep 30
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.