Our in-house experts typically reply within one business day.
CURT
On Sale Today
Original price was $352.95. Current price is $238.99.You save $113.96 (32%)
Free Shipping
Ships free on all orders
Authorized Dealer
2008 - 2010 Ford F-250 Super Duty
Confirmed to Fit
2008 - 2010 Ford F-350 Super Duty
Confirmed to Fit
2008 - 2010 Ford F-450 Super Duty
Confirmed to Fit
2008 - 2010 Ford F-550 Super Duty
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Verify Fitment
Select your vehicle to confirm this part fits.
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Sun, Aug 30 - Tue, Sep 1
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes all necessary installation hardware
Includes all necessary installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 500 LB / 5,000 LB
Weight Carrying Capacity (Pounds): 5,000 LB
WC Tongue Weight (Pounds): 500 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2" x 2" shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Ford F250 Super Duty, F350 Super Duty, F450 Super Duty and F550 Super Duty (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Rediscover "Us" Time | Tested. Proven. Safe. Towing Products
Yes, the CURT 2" Front Receiver Hitch, Select Ford F-250, F-350, F-450, F-550 Super Duty Trailer Hitch (Part #BKDK31008) is designed to fit the 2008-2010 Ford F-250 Super Duty.
The CURT 2" Front Receiver Hitch, Select Ford F-250, F-350, F-450, F-550 Super Duty Trailer Hitch (Part #BKDK31008) fits 2008-2010 Ford F-250 Super Duty models. The 2010 model year is the last year covered by this part number. For newer models, check for an updated version.
The CURT 2" Front Receiver Hitch, Select Ford F-250, F-350, F-450, F-550 Super Duty Trailer Hitch (Part #BKDK31008) fits the following vehicles: 2008-2010 Ford F-250 Super Duty; 2008-2010 Ford F-350 Super Duty; 2008-2010 Ford F-450 Super Duty; 2008-2010 Ford F-550 Super Duty. Always verify your specific year, make, and model before ordering.
The CURT 2" Front Receiver Hitch, Select Ford F-250, F-350, F-450, F-550 Super Duty Trailer Hitch (Part #BKDK31008) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
Yes, part number 31008 is designed for 2008-Present Ford Super Duty F-250, F-350, and F-450 models. Confirm your truck model year and cab/bed configuration match this range before purchasing.
When used as a weight-carrying hitch, the 31008 has a gross load capacity of 5,000 lbs trailer weight and 500 lbs tongue weight. When used for straight-line pull (winching), the maximum line pull is 9,000 lbs. However, you must not exceed your vehicle manufacturer's recommended towing capacity, which may be lower than these ratings.
The Curt 31008 fits 2008-Present Ford Super Duty F-250, F-350, and F-450 trucks.
5,000 lbs trailer weight and 500 lbs tongue weight for weight-carrying use; 9,000 lbs maximum line pull for straight-line pull. Do not exceed your vehicle manufacturer's recommended towing capacity.
On newer Ford Super Duty models, it may be necessary to trim the plastic air dam located on the bottom of the bumper and remove air dam support brackets. Check your specific model before installation; if the hitch does not fit properly, trimming will be required.
You will need: 5/8" fishwire, ratchet, 9/16" socket, 5/8" socket, 9/16" wrench, and a torque wrench. You will also need jack stands to support the hitch during installation.
5/8" fishwire, ratchet, 9/16" and 5/8" sockets, 9/16" wrench, torque wrench, and jack stands.
The kit includes: 2× 5/8"-11 UNC carriage bolts (1-1/2" long, Grade 8); 2× 9/16"-12 UNC hex cap screws (2" long, Grade 8, yellow zinc); 2× 9/16" hex nuts (Grade 8, yellow zinc); 2× 5/8" hex nuts (Grade 8, yellow zinc); 2× 5/8" lock washers (yellow zinc); 2× 9/16" lock washers (yellow zinc); 2× 9/16" flat washers (yellow zinc); and 2× 5/8" fishwire.
1. On newer models, trim the plastic air dam on the bottom of the bumper and remove air dam support brackets if necessary. 2. Raise the hitch into position and support it with jack stands. 3. Fishwire the 5/8" carriage bolts through the end of the frame rail into position as shown in the diagram. Secure with lock washers and hex nuts. 4. Install the 9/16" hex bolts and flat washers as shown. Secure with lock washers and hex nuts. 5. Torque all 9/16" hardware to 130 lb-ft and all 5/8" hardware to 180 lb-ft.
Torque all 9/16" hardware to 130 lb-ft and all 5/8" hardware to 180 lb-ft. This applies to both the carriage bolts and hex cap screws used in the installation.
9/16" hardware: 130 lb-ft; 5/8" hardware: 180 lb-ft.
Fishwire is a method of securing fasteners through aligned holes. In the 31008 installation, you thread the 5/8" carriage bolts through the end of the frame rail and into position, then secure them with lock washers and hex nuts. The fishwire hardware is included in the kit.
Periodically check the receiver hitch to ensure that all fasteners are tight and that all structural components are sound. This helps maintain the integrity and safety of the installation over time.
Periodically check all fasteners for tightness and inspect all structural components for soundness.
Yes, the 31008 can be used for straight-line pull with a maximum line pull of 9,000 lbs. However, you must follow these guidelines: use OEM tow hooks, recovery eyes, or a clevis mount for attachment—never use a ball mount as an anchor point. When using a snatch block, attach the return cable to the tow hook or recovery eye, not to the winch mount. The winch cable must not exceed 15 degrees up or down from horizontal or 45 degrees left or right from straight ahead. Observe all winch manufacturer's recommendations, cautions, and warnings.
The winch cable must not exceed 15 degrees up or down from horizontal and 45 degrees left or right from straight ahead. Exceeding these angles may overload the winch, winch mount, and/or front-mounted receiver.
No. Never use a ball mount or ball as an anchor point for a tow strap or winch cable. Severe personal injury or death could result. Use only OEM tow hooks, recovery eyes, or a clevis mount for attachment.
Attach the return cable to the tow hook or recovery eye, not to the winch mount. Attaching it to the winch mount may overload the winch mount and/or front-mounted receiver.
The GAWR is the maximum weight your vehicle's front axle is designed to carry. You must not exceed your vehicle's front axle GAWR when using front-mounted accessories. Exceeding GAWR may overload the front axle and/or suspension, which could result in accident, property damage, and personal injury. Find your GAWR in your vehicle's owner's manual or on the specification plate located on the driver's door frame. Measure gross front axle weight by placing the front wheels of your loaded vehicle on a scale.
Yes. Rear wheel traction may be reduced when using the hitch, which could affect handling. Reduce speed and drive with caution. Additionally, the hitch extends the front of the vehicle, which may reduce approach angle. Use caution when parking and maneuvering.
Ensure the hitch does not: obstruct vehicle lights, obstruct the driver's view, or block free air flow into the grille opening. If your front-mounted license plate is obstructed by the hitch, reposition it.
On newer models, the plastic air dam located on the bottom of the bumper and air dam support brackets may need to be trimmed or removed to allow the hitch to fit. Check whether the air dam is interfering with the hitch position. If trimming is necessary, remove the air dam and support brackets before attempting to install the hitch again.
Check that all fasteners are tight. Retorque all 9/16" hardware to 130 lb-ft and all 5/8" hardware to 180 lb-ft using a torque wrench. Periodically check the hitch to ensure all fasteners remain tight and all structural components are sound, as vibration and use can loosen fasteners over time.
4 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2008 - 2010 | Ford F-250 Super Duty | No Drilling Required Fascia Trimming: Yes (minor) Installation Time: 30-60 minutes Visibility: Concealed |
| 2008 - 2010 | Ford F-350 Super Duty | No Drilling Required Fascia Trimming: Yes (minor) Installation Time: 30-60 minutes Visibility: Concealed |
| 2008 - 2010 | Ford F-450 Super Duty | No Drilling Required Fascia Trimming: Yes (minor) Installation Time: 30-60 minutes Visibility: Concealed |
| 2008 - 2010 | Ford F-550 Super Duty | No Drilling Required Fascia Trimming: Yes (minor) Frame: With 34 In. Frame (O.D.) Installation Time: 30-60 minutes Visibility: Concealed |
No reviews have been added for this product.
