CURT 2" Front Receiver Hitch, Select Toyota 4Runner Trailer HitchCURTOriginal price was $506.95. Current price is $339.99.In Stock
View productAsk a Question About This Product
Our in-house experts typically reply within one business day.
Our in-house experts typically reply within one business day.
CURT
On Sale Today
Original price was $490.95. Current price is $329.99.You save $160.96 (33%)
Free Shipping
Ships free on all orders
Authorized Dealer
2010 - 2021 Toyota 4Runner
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Verify Fitment
Select your vehicle to confirm this part fits.
Quick Ship
In stock and ready to ship — order now!
Shipping from Eau Claire, WIFREE SHIPPING
Estimated delivery Mon, Sep 7 - Wed, Sep 9
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
Includes all necessary installation hardware
Includes all necessary installation hardware
Warranty: Limited Lifetime Warranty (One-Year Finish, One-Year Parts)
Receiver Tube Size (Inches): 2 IN
Finish: GLOSS BLACK POWDER COAT
WC / TW (Pounds): 350 LB / 3,500 LB
Weight Carrying Capacity (Pounds): 3,500 LB
WC Tongue Weight (Pounds): 350 LB
Installation Difficulty: Novice
Installation Time Exact (Minutes): 30
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2" x 2" shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 3,500 lbs. GTW and 350 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Toyota 4Runner (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
CURT offers a variety of high-quality trailer hitches and accessories for select vehicle models. Find the perfect fit for your towing needs at TowUniverse.
CURT, a Lippert brand, offers a complete line of towing products and is the leading manufacturer of custom-fit trailer hitches. We offer the broadest selection of custom-fit hitches, and each one is designed, welded, and coated in Wisconsin.
CURT is also a leader in flat towing products, as well as 5th wheel, gooseneck, and weight distribution hitches, ball mounts, electrical components, cargo solutions, and other towing accessories.
For everything from passenger cars and vans to full-size pickups and SUVs, CURT is 'The First Name in Towing Products®.'
Experts available to answer your questions
Call 888-634-9494The CURT 31054 2-Inch Front Receiver Hitch, Select Toyota 4Runner (Part #BKDK31054) fits 2010-2021 Toyota 4Runner models. The 2021 model year is the last year covered by this part number. For newer models, check for an updated version.
Yes, the CURT 31054 2-Inch Front Receiver Hitch, Select Toyota 4Runner (Part #BKDK31054) is designed to fit the 2010-2021 Toyota 4Runner.
The CURT 31054 2-Inch Front Receiver Hitch, Select Toyota 4Runner (Part #BKDK31054) fits the following vehicles: 2010-2021 Toyota 4Runner. Always verify your specific year, make, and model before ordering.
The CURT 31054 2-Inch Front Receiver Hitch, Select Toyota 4Runner (Part #BKDK31054) Drilling is not required for installation. Typical installation time is 30-60 minutes. Basic hand tools are typically all you need.
The CURT 31054 hitch fits Toyota 4Runner models from 2010 to present, excluding the Trail Edition. Verify your vehicle model and year before purchasing.
When used as a straight line pull, the hitch has a gross load capacity of 9,000 lbs maximum. The weight carrying capacity (trailer weight and tongue weight) is listed in the manual but the specific values are not filled in on the provided documentation. Contact CURT Manufacturing at 877-287-8634 for weight carrying specifications. Never exceed your vehicle manufacturer's recommended towing capacity.
The manual lists tongue weight as 350 lbs minimum and trailer weight as 3,500 lbs minimum, but the maximum weight carrying capacity values are not specified in the provided documentation. Contact CURT Manufacturing at 877-287-8634 for complete weight carrying specifications.
The hitch weight is 33 lbs.
You will need a ratchet, sockets in 10mm, 14mm, 17mm, 19mm, and 15/16" sizes, and a torque wrench. Safety glasses should be worn at all times during installation.
The kit includes: 2× M10 hex cap screws (HHCS, M10×1.25×35, CL10.9), 2× 3/8" conical tooth washers, 2× M12 hex cap screws (HHCS, M12×1.25×35, CL10.9), 2× 1/2" conical tooth washers, 2× 5/8" carriage bolts (5/8-11 UNC, 1-3/4"), 2× 5/8" serrated flange nuts (GRD8), and 2× round hole spacers (CM-31054-SP).
No, drilling is not required. The hitch uses existing weldnuts and bolt holes on the vehicle frame.
Two people may be required to ease installation. If you are hesitant to undertake this task on your own, contact an authorized CURT installer for additional assistance.
Professional installation takes approximately 30 minutes. Novice (DIY) installation takes approximately 60 minutes.
Underbody panel trimming is optional. You may remove the driver and passenger side underbody panels and return them to the vehicle owner, or trim and reinstall them. If trimming, refer to the underbody panel trim diagram on page 2 or 5. Trim dimensions are approximate; check fit prior to completing the trim.
Torque all M10 fasteners to 48 ft-lbs, all M12 fasteners to 86 ft-lbs, and all 5/8" fasteners to 180 lb-ft. Use a torque wrench to ensure proper tightness.
1. Remove driver and passenger side underbody panels (5 fasteners each). 2. Remove one hex bolt from the end of each frame rail (lowest outer bolt on each side). 3. Lift hitch into position, locating vehicle tow loops under hitch mounting plates. 4. Loosely insert M10 hex bolts with 3/8" conical tooth washers into the weldnuts where bolts were removed. 5. Loosely insert M12 bolts with 1/2" conical tooth washers into existing weldnuts on frame rail outsides. 6. Insert 5/8" carriage bolts through hitch mounting plates and tow loops; secure with supplied spacers and 5/8" flange nuts. 7. Torque all fasteners to specification. 8. If trimming, trim and reinstall underbody panels.
Fasteners should be inserted loosely first. In step 4, loosely insert M10 hex bolts with washers. In step 5, loosely insert M12 bolts with washers. In step 6, insert and loosely attach 5/8" carriage bolts with spacers and flange nuts. Only after all fasteners are in place should they be torqued to specification in step 7.
The original hex bolts removed from the end of each frame rail (lowest outer bolt on each side) should be returned to the vehicle owner. They are replaced with the included M10 hardware.
The vehicle tow loops are factory attachment points on the 4Runner frame. During installation, the hitch is positioned so that the vehicle tow loops are located under the hitch mounting plates. The carriage bolts are then inserted through both the hitch mounting plates and tow loops to secure the hitch.
Periodically check the receiver hitch to ensure all fasteners are tight and all structural components are sound. This ongoing inspection helps maintain safe operation and prevent loosening due to vibration and use.
For maximum line pull rating, the winch cable must not exceed 15 degrees angle up or down from horizontal, and 45 degrees angle left or right from straight ahead. Exceeding these angles may overload the winch, winch mount, and/or front mounted receiver.
No. Never use a ball and/or ball mount as an anchor point for a tow strap or winch cable. Severe personal injury or death could result. Use OEM tow hooks, recovery eyes, or a clevis mount for attachment instead.
The front axle GAWR is the maximum weight the front axle can safely carry. Do not exceed your vehicle's front axle GAWR. Consult your owner's manual or the specification plate on the driver's door frame. Measure gross front axle weight by placing the front wheels of your loaded vehicle on a scale. Exceeding GAWR may overload the front axle and/or suspension, which could result in accident, property damage, and personal injury.
Do not obstruct vehicle lights. Reposition the front mounted license plate if it is obstructed by the hitch. Ensure the hitch does not block any lights or impede driver view.
The hitch extends the front of the vehicle, which may reduce approach angle. Use caution when parking and maneuvering. Additionally, rear wheel traction may be reduced when the hitch is in use, which could affect handling. Reduce speed and drive with caution.
Yes. Allow free air flow into the grille opening. Do not obstruct the grille, as this is necessary for proper engine cooling.
Yes, it fits Toyota 4Runner 2010–present (excludes Trail Edition). Verify your model year and edition before purchasing.
9,000 lbs maximum. Never exceed your vehicle manufacturer's recommended towing capacity.
Ratchet, sockets (10mm, 14mm, 17mm, 19mm, 15/16"), torque wrench, and safety glasses.
No drilling required. The hitch uses existing frame weldnuts and bolt holes.
No, trimming is optional. You may remove and return the panels or trim and reinstall them. Trim dimensions are approximate; check fit before completing.
M10 fasteners: 48 ft-lbs. M12 fasteners: 86 ft-lbs. 5/8" fasteners: 180 lb-ft.
Professional: ~30 minutes. DIY/novice: ~60 minutes.
No. Never use the ball as an anchor point. Use OEM tow hooks or recovery eyes instead. Severe injury or death could result.
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2010 - 2021 | Toyota 4Runner | No Drilling Required Installation Time: 30-60 minutes Visibility: Exposed |
No reviews have been added for this product.
