Our in-house experts typically reply within one business day.
Luverne
Verify Fitment
Select your vehicle to confirm this part fits.
2003 - 2027 Chevrolet Express 2500
Confirmed to Fit
2003 - 2027 GMC Savana 2500
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Like many LUVERNE side steps and running boards, O-Mega II 6" oval side steps are made to work hard and to do it with style. They are constructed from strong, lightweight, rust-free aluminum, and to truly make them a step up from the rest, we shield them in a highly durable powder coat finish. This ensures maximum corrosion resistance and excellent protection against scuffs and scratches. The side steps are available in two powder coat finish options, including textured black and silver powder coat. O-Mega II side steps are also made to provide safe, comfortable entry and exit from your vehicle. They feature tough aluminum step pads with protruded circular treads that will never wear or crack. This package includes the side steps only and requires mounting brackets for a complete installation (sold separately).
LUVERNE O-Mega II 6" oval side steps are made to work hard and to do it with style. They are constructed from strong, lightweight, rust-free aluminum and shielded in a highly durable powder coat finish of textured black or smooth silver.
LUVERNE has manufactured truck accessories in the United States since 1963, specialising in grille guards, running boards, side steps and mud guards for pickups, commercial vans and SUVs. Products are built primarily from stainless steel, aluminium and mild steel, with model-specific mounting kits that use existing frame locations for a bolt-on installation.
LUVERNE has been manufacturing automotive accessories in the United States since 1963, and six decades of continuous production have made it a nationally recognised name in the truck accessory market. Now a Lippert brand, it concentrates on a defined set of products rather than spreading across the whole aftermarket: front-end protection, step access and spray protection for pickup trucks, commercial vans and sport utility vehicles.
Step products are the largest part of the catalog and the range is unusually deep, because the right step depends on the vehicle's ride height, the width of the rocker panel and how often people get in and out. The O-Mega II six-inch oval steps give a wide, flat standing surface in polished stainless or black powder coat, while the Regal 7 seven-inch oval steps go wider still for full-size crew cabs and lifted trucks. The broader running board and side bar range covers round tube, oval and boxed profiles across cab configurations, with treads positioned at the door openings where they are used.
Grille guards protect the front end against impacts, brush and road debris, built in tubular stainless or steel with model-specific brackets that tie into factory frame mounting points. Because the fit is engineered per vehicle, installation is a bolt-on job that does not require drilling or cutting on most applications.
Rounding out the line, LUVERNE mud guards and mud flaps shield rocker panels, paint and following vehicles from stones and road spray, in widths matched to the tyre and fender they sit behind. Material choice runs through everything the brand does: stainless steel where appearance and corrosion resistance matter most, aluminium where weight is the priority, and mild steel with protective coating where strength and value lead. Customers include contractors, fleet operators, van upfitters and truck owners.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
43 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2003 - 2027 | Chevrolet Express 2500 | — | — | — |
| 2003 - 2027 | Chevrolet Express 3500 | Extended Passenger Van | — | — |
| 2014 - 2026 | Chevrolet Silverado 1500 | Crew Cab Pickup | 6'7" Bed | — |
| 1999 - 2013 | Chevrolet Silverado 1500 | Extended Cab Pickup | 8'2" Bed | — |
| 2007 | Chevrolet Silverado 1500 Classic | Extended Cab Pickup | 8'2" Bed | — |
| 2022 | Chevrolet Silverado 1500 LTD | Crew Cab Pickup | 6'7" Bed | — |
| 2004 | Chevrolet Silverado 2500 | Crew Cab Pickup | 6'7" Bed | — |
| 2000 - 2004 | Chevrolet Silverado 2500 | Extended Cab Pickup | 8'2" Bed | — |
| 2001 - 2019 | Chevrolet Silverado 2500 HD | Crew Cab Pickup | 6'7" Bed | — |
| 2001 - 2013, 2015 - 2019 | Chevrolet Silverado 2500 HD | Extended Cab Pickup | 8'2" Bed | — |
| 2007 | Chevrolet Silverado 2500 HD Classic | Crew Cab Pickup | 6'7" Bed | — |
| 2007 | Chevrolet Silverado 2500 HD Classic | Extended Cab Pickup | 8'2" Bed | — |
| 2001 - 2006 | Chevrolet Silverado 3500 | Extended Cab Pickup | 8'2" Bed | — |
| 2007 | Chevrolet Silverado 3500 Classic | Extended Cab Pickup | 8'2" Bed | — |
| 2011 - 2019 | Chevrolet Silverado 3500 HD | Crew Cab Pickup | 6'7" Bed | — |
| 2007 - 2013, 2015 - 2018 | Chevrolet Silverado 3500 HD | Extended Cab Pickup | 8'2" Bed | — |
| 2006 - 2008 | Dodge Ram 1500 | Extended Crew Cab Pickup | 8'2" Bed | — |
| 2006 - 2009 | Dodge Ram 2500 | Extended Crew Cab Pickup | 8'2" Bed | — |
| 2006 - 2009 | Dodge Ram 3500 | Extended Crew Cab Pickup | 8'2" Bed | — |
| 2015 - 2026 | Ford F-150 | Extended Cab Pickup | 8'2" Bed | — |
| 2008 - 2016 | Ford F-250 Super Duty | Crew Cab Pickup | 6'10" Bed | — |
| 2008 - 2027 | Ford F-250 Super Duty | Extended Cab Pickup | 8'2" Bed | — |
| 2008 - 2016 | Ford F-350 Super Duty | Crew Cab Pickup | 6'10" Bed | — |
| 2008 - 2027 | Ford F-350 Super Duty | Extended Cab Pickup | 8'2" Bed | — |
| 2003 - 2027 | GMC Savana 2500 | — | — | — |
The O-MEGA II 6" Oval Step is a universal nerf bar/running board system manufactured by Curt. It is designed for universal application and comes in multiple model numbers (583098, 583102, 583108, 583114, 583125, 584098, 584102, 584114, 584125). The manual provides specific step pad location guidance for Chevrolet Silverado/Sierra (Double, Extended, and Crew Cab), GMC Sierra, Chevrolet Express Van, GMC Savana Van, RAM Quad/Crew/Mega Cab, and Ford F150 and Super Duty trucks in various cab configurations. For other vehicles, the step pad locations may be positioned at the purchaser's discretion.
Yes, the O-MEGA II 6" Oval Step is compatible with Chevrolet Silverado Double Cab. The manual provides specific step pad positioning for this vehicle: Pad A should be positioned at 14-3/4" and Pad B at 46-3/4" from a reference point. However, the manual notes that these pad locations are suggestions only and may be placed at the purchaser's discretion.
Yes, the O-MEGA II 6" Oval Step is compatible with Ford F150 Super Crew Cab. The manual provides specific step pad positioning for this vehicle: Pad A should be positioned at 18-1/4" and Pad B at 56-1/2" from a reference point. These pad locations are suggestions only and may be placed at the purchaser's discretion.
Yes, the O-MEGA II 6" Oval Step is compatible with RAM Crew Cab. The manual provides specific step pad positioning for this vehicle: Pad A should be positioned at 10-1/2" and Pad B at 48" from a reference point. These pad locations are suggestions only and may be placed at the purchaser's discretion.
Yes, the O-MEGA II 6" Oval Step is compatible with Chevrolet Express Van. The manual provides specific step pad positioning for this vehicle: Pad A should be positioned at 7-1/2" and only one pad (Pad A) is used—Pad B is marked as N/A. These pad locations are suggestions only and may be placed at the purchaser's discretion.
The O-MEGA II step includes: 2 aluminum extrusions (available in silver or black, in various lengths), 6 step pads, 4 plastic end caps, 28 square head bolts (5/16-18 x 1"), 28 serrated flange nuts (5/16-18), and 30 TEK screws (#8-18 x 1/2"). The specific extrusion length depends on your model number. You will also need vehicle-specific mounting brackets, which are installed per separate bracket instructions provided with your bracket package.
The manual does not explicitly state whether mounting brackets are included. The instructions direct you to "follow the instructions included with the specific bracket package that you are using, to mount the brackets to your vehicle," which suggests brackets are a separate component. Contact the manufacturer or your retailer to confirm whether brackets are included with your purchase or must be ordered separately.
The manual requires a drill with a 1/8" drill bit to drill holes for the step pad attachment. The manual does not specify other tools required for installation. You will need tools to install the mounting brackets per the separate bracket instructions, and standard tools to tighten nuts and bolts (wrench or socket set for 5/16" fasteners).
Read the installation instructions completely and check that all required parts listed on the Service Parts List are on hand before starting the installation. You will also need to follow the instructions included with your specific bracket package to mount the brackets to your vehicle before attaching the O-MEGA steps to the brackets.
1. Use the Step Pad Location Guide on page 2 to determine the correct position for each step pad on your vehicle model. 2. Place the step pads (Item #2) on top of the step plates. 3. Using the step pad as a guide, drill 5 holes at 1/8" diameter through the step pad into the step plate. 4. Attach the step pad with 5 TEK screws (Item #6, #8-18 x 1/2") provided. 5. Repeat for all step pads. Note: Due to the shortness of some boxes, mount the box step pad first approximately 1/2" from the end cap, then mount the middle step pad accordingly.
Yes, drilling is required. You must drill 5 holes at 1/8" diameter through each step pad into the step plate using the step pad as a guide. These holes are used to attach the step pads with TEK screws. The drilling is permanent and necessary for proper step pad installation.
Drill 5 holes at 1/8" diameter through each step pad into the step plate. Use the step pad as a guide for hole placement.
Tighten the nuts on the end caps (Item #3) to 5 lb-ft.
Install 5/16" serrated flange nuts (Item #5) on the square head screws (Item #4) and tighten to 19 lb-ft. These screws are located in the slots of the mounting brackets and secure the step to the brackets.
1. Position the O-MEGA step on the mounting brackets so that the square head screws (Item #4) are located in the slots of the mounting brackets. 2. Center the step front to rear on the vehicle. 3. Install 5/16" serrated flange nuts (Item #5) on the square head screws and tighten to 19 lb-ft.
1. Read instructions completely and verify all required parts are on hand. 2. Follow bracket package instructions to mount brackets to your vehicle. 3. Place step pads on step plates using the location guide for your vehicle. 4. Drill 5 holes at 1/8" diameter per step pad and attach with TEK screws. 5. Install square head bolts into the designated slots in the bottom of the step plates. 6. Install end caps and tighten nuts to 5 lb-ft. 7. Position the step on the mounting brackets with square head screws in the bracket slots, centered front to rear. 8. Install serrated flange nuts on square head screws and tighten to 19 lb-ft.
Yes. Step 4 of the installation instructions states: "Install the required number of square head bolts into the designated slots in the bottom of the step plates." These bolts are part of the assembly and must be installed before positioning the step on the mounting brackets.
Install the end caps (Item #3) as shown in Figure 1 on the manual, and tighten the nuts to 5 lb-ft. The manual references Figure 1 for proper installation orientation.
For Chevrolet Silverado Extended Cab, position Pad A at 14-3/4" and Pad B at 41-3/4" from a reference point. These are suggested locations and may be placed at the purchaser's discretion.
For Chevrolet Silverado Crew Cab, position Pad A at 14-3/4" and Pad B at 54-1/4" from a reference point. These are suggested locations and may be placed at the purchaser's discretion.
For RAM Quad Cab, position Pad A at 10-1/2" and Pad B at 46" from a reference point. These are suggested locations and may be placed at the purchaser's discretion.
For RAM Mega Cab, position Pad A at 10-1/2" and Pad B at 52-1/16" from a reference point. These are suggested locations and may be placed at the purchaser's discretion.
For Ford F150 Super Cab, position Pad A at 18-1/4" and Pad B at 46-1/4" from a reference point. These are suggested locations and may be placed at the purchaser's discretion.
For Ford Super Duty Super Cab, position Pad A at 6-7/8" and Pad B at 39-1/16" from a reference point. These are suggested locations and may be placed at the purchaser's discretion.
For Ford Super Duty Crew Cab, position Pad A at 6-7/8" and Pad B at 52-7/8" from a reference point. These are suggested locations and may be placed at the purchaser's discretion.
Yes. The manual states: "The above pad locations are only suggestions and may be placed at the purchaser's discretion." You may position the step pads at locations other than those listed in the Step Pad Location Guide.
Due to the shortness of some boxes, mount the box step pad first approximately 1/2" from the end cap, and then mount the middle step pad accordingly. This ensures proper spacing and positioning on vehicles with shorter bed lengths.
The O-MEGA II is designed for universal application with specific pad location guidance for Chevrolet Silverado/Sierra, GMC Sierra, Chevrolet Express Van, GMC Savana Van, RAM Quad/Crew/Mega Cab, and Ford F150 and Super Duty trucks. For other vehicles, pad locations may be positioned at your discretion. Consult the Step Pad Location Guide on page 2 for your specific vehicle model.
End cap nuts: 5 lb-ft. Square head screw serrated flange nuts: 19 lb-ft.
Yes. When positioning the step on the mounting brackets, center it front to rear on the vehicle before tightening the serrated flange nuts to 19 lb-ft.
1. Install mounting brackets per bracket instructions. 2. Attach step pads using the location guide for your vehicle, drilling 5 holes at 1/8" and securing with TEK screws. 3. Install square head bolts into step plate slots. 4. Install and tighten end caps to 5 lb-ft. 5. Position step on brackets, center front to rear, and tighten serrated flange nuts to 19 lb-ft.
On Sale Today
Original price was $521.95. Current price is $459.95.You save $62.00 (12%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Aug 24 - Thu, Aug 27
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
