Our in-house experts typically reply within one business day.
Luverne
Verify Fitment
Select your vehicle to confirm this part fits.
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Like many LUVERNE side steps and running boards, O-Mega II 6" oval side steps are made to work hard and to do it with style. They are constructed from strong, lightweight, rust-free aluminum, and to truly make them a step up from the rest, we shield them in a highly durable powder coat finish. This ensures maximum corrosion resistance and excellent protection against scuffs and scratches. The side steps are available in two powder coat finish options, including textured black and silver powder coat. O-Mega II side steps are also made to provide safe, comfortable entry and exit from your vehicle. They feature tough aluminum step pads with protruded circular treads that will never wear or crack. This package includes the side steps only and requires mounting brackets for a complete installation (sold separately).
LUVERNE O-Mega II 6" oval side steps are made to work hard and to do it with style. They are constructed from strong, lightweight, rust-free aluminum and shielded in a highly durable powder coat finish of textured black or smooth silver.
LUVERNE has manufactured truck accessories in the United States since 1963, specialising in grille guards, running boards, side steps and mud guards for pickups, commercial vans and SUVs. Products are built primarily from stainless steel, aluminium and mild steel, with model-specific mounting kits that use existing frame locations for a bolt-on installation.
LUVERNE has been manufacturing automotive accessories in the United States since 1963, and six decades of continuous production have made it a nationally recognised name in the truck accessory market. Now a Lippert brand, it concentrates on a defined set of products rather than spreading across the whole aftermarket: front-end protection, step access and spray protection for pickup trucks, commercial vans and sport utility vehicles.
Step products are the largest part of the catalog and the range is unusually deep, because the right step depends on the vehicle's ride height, the width of the rocker panel and how often people get in and out. The O-Mega II six-inch oval steps give a wide, flat standing surface in polished stainless or black powder coat, while the Regal 7 seven-inch oval steps go wider still for full-size crew cabs and lifted trucks. The broader running board and side bar range covers round tube, oval and boxed profiles across cab configurations, with treads positioned at the door openings where they are used.
Grille guards protect the front end against impacts, brush and road debris, built in tubular stainless or steel with model-specific brackets that tie into factory frame mounting points. Because the fit is engineered per vehicle, installation is a bolt-on job that does not require drilling or cutting on most applications.
Rounding out the line, LUVERNE mud guards and mud flaps shield rocker panels, paint and following vehicles from stones and road spray, in widths matched to the tyre and fender they sit behind. Material choice runs through everything the brand does: stainless steel where appearance and corrosion resistance matter most, aluminium where weight is the priority, and mild steel with protective coating where strength and value lead. Customers include contractors, fleet operators, van upfitters and truck owners.
Experts available to answer your questions
Call 888-634-9494Limited Lifetime Warranty (Five-Year Finish, One-Year Parts)
17 compatible vehicles
| Year | Make & Model | Style | Bed | Notes |
|---|---|---|---|---|
| 2004 | Chevrolet Silverado 2500 | Crew Cab Pickup | 8'2" Bed | — |
| 2001 - 2019 | Chevrolet Silverado 2500 HD | Crew Cab Pickup | 8'2" Bed | — |
| 2007 | Chevrolet Silverado 2500 HD Classic | Crew Cab Pickup | 8'2" Bed | — |
| 2001 - 2006 | Chevrolet Silverado 3500 | Crew Cab Pickup | 8'2" Bed | — |
| 2007 | Chevrolet Silverado 3500 Classic | Crew Cab Pickup | 8'2" Bed | — |
| 2007 - 2019 | Chevrolet Silverado 3500 HD | Crew Cab Pickup | 8'2" Bed | — |
| 2008 - 2027 | Ford F-250 Super Duty | Crew Cab Pickup | 8'2" Bed | — |
| 2008 - 2027 | Ford F-350 Super Duty | Crew Cab Pickup | 8'2" Bed | — |
| 2008 - 2026 | Ford F-450 Super Duty | Crew Cab Pickup | 8'2" Bed | — |
| 2004 | GMC Sierra 2500 | Crew Cab Pickup | 8'2" Bed | — |
| 2001 - 2019 | GMC Sierra 2500 HD | Crew Cab Pickup | 8'2" Bed | — |
| 2007 | GMC Sierra 2500 HD Classic | Crew Cab Pickup | 8'2" Bed | — |
| 2001 - 2006 | GMC Sierra 3500 | Crew Cab Pickup | 8'2" Bed | — |
| 2007 | GMC Sierra 3500 Classic | Crew Cab Pickup | 8'2" Bed | — |
| 2007 - 2019 | GMC Sierra 3500 HD | Crew Cab Pickup | 8'2" Bed | — |
| 2014 - 2026 | Ram 2500 | Crew Cab Pickup | 8'2" Bed | — |
| 2013 - 2026 | Ram 3500 | Crew Cab Pickup | 8'2" Bed | — |
The O-MEGA II 6" Oval Step is a universal nerf bar/side step system available in nine model variations (583098, 583102, 583108, 583114, 583125, 584098, 584102, 584114, 584125). It is designed for universal application with specific pad location guidance provided for Chevrolet Silverado/Sierra (Double, Extended, and Crew Cab), GMC Sierra, Chevrolet Express Van, GMC Savana Van, RAM Quad/Crew/Mega Cab, Ford F150 (Super Cab and Super Crew Cab), and Ford Super Duty (Super Cab and Crew Cab). Installation requires a vehicle-specific bracket package purchased separately.
Yes, the O-MEGA II 6" Oval Step is compatible with Chevrolet Silverado Double Cab. For this vehicle, Pad A should be positioned at 14-3/4" and Pad B at 46-3/4" from a reference point. However, these are suggestions and may be placed at the purchaser's discretion. You will need to purchase the appropriate vehicle-specific bracket package separately, which includes its own installation instructions.
Yes, the O-MEGA II 6" Oval Step is compatible with Ford F150 Super Crew Cab. For this vehicle, Pad A should be positioned at 18-1/4" and Pad B at 56-1/2" from a reference point. These are suggestions and may be placed at the purchaser's discretion. You will need to purchase the appropriate vehicle-specific bracket package separately.
Yes, the O-MEGA II 6" Oval Step is compatible with RAM Crew Cab. For this vehicle, Pad A should be positioned at 10-1/2" and Pad B at 48" from a reference point. These are suggestions and may be placed at the purchaser's discretion. You will need to purchase the appropriate vehicle-specific bracket package separately.
Yes, the O-MEGA II 6" Oval Step is compatible with Chevrolet Express Van. For this vehicle, only Pad A is used, positioned at 7-1/2" from a reference point; Pad B is not applicable (N/A). This is a suggestion and may be placed at the purchaser's discretion. You will need to purchase the appropriate vehicle-specific bracket package separately.
Yes, the O-MEGA II 6" Oval Step is compatible with Ford Super Duty Super Cab. For this vehicle, Pad A should be positioned at 6-7/8" and Pad B at 39-1/16" from a reference point. These are suggestions and may be placed at the purchaser's discretion. You will need to purchase the appropriate vehicle-specific bracket package separately.
The O-MEGA II step includes: two aluminum extrusions (available in silver or black, in lengths of 95.0", 99.0", 105.0", 111.0", or 122.0" depending on model), six step pads (Item #2), four plastic end caps (Item #3), 28 square head screws 5/16-18 x 1" (Item #4), 28 serrated flange nuts 5/16-18 (Item #5), and 30 tek screws #8-18 x 1/2" (Item #6). The vehicle-specific bracket package is purchased separately and includes its own instructions.
Before starting installation, read all instructions completely and verify that all required parts listed on the Service Parts List are on hand. You will also need to obtain the vehicle-specific bracket package for your vehicle, which includes separate installation instructions for mounting the brackets to your vehicle. Follow those bracket instructions before attaching the O-MEGA steps.
1. Mount the brackets to your vehicle following the separate bracket package instructions. 2. Position step pads (Item #2) on top of the step plates using the vehicle-specific pad location guide on Sheet 2. 3. Drill five 1/8" holes using the step pad as a guide and attach with five 8-18 x 1/2" tek screws (Item #6). Repeat for all step pads. Note: mount the box step pad first, approximately ½" from the end cap, then mount the middle step pad accordingly. 4. Install square head bolts into the designated slots in the bottom of the step plates. 5. Install end caps (Item #3) and tighten nuts to 5 lb ft. 6. Position the O-MEGA step on the mounting brackets so square head screws are in the bracket slots and the step is centered front to rear. Install 5/16" serrated flange nuts (Item #5) on the square head screws and tighten to 19 lb ft.
Yes, drilling is required. When installing the step pads on the steps, you must drill five 1/8" holes using the step pad as a guide. These holes are used to attach the step pads with five 8-18 x 1/2" tek screws (Item #6) provided.
Drill five 1/8" holes using the step pad as a guide. These holes are used to attach the step pads with the provided 8-18 x 1/2" tek screws (Item #6).
Tighten the end cap nuts to 5 lb ft.
Install 5/16" serrated flange nuts (Item #5) on the square head screws (Item #4) and tighten to 19 lb ft.
Use the Step Pad Location Guide table on Sheet 2 to position the step pads for your particular vehicle. The guide provides specific measurements for Pad A and Pad B positions. Note: due to the shortness of some boxes, mount the box step pad first, approximately ½" from the end cap, and then mount the middle step pad accordingly. The pad locations in the guide are suggestions and may be placed at the purchaser's discretion.
Step pads are attached using five 8-18 x 1/2" tek screws (Item #6, stainless steel, bright zinc plated). These screws are inserted through five 1/8" holes drilled using the step pad as a guide.
The O-MEGA step is attached to the mounting brackets using square head screws (Item #4, 5/16-18 x 1", MagniGuard) that fit into the slots of the mounting brackets, secured with 5/16" serrated flange nuts (Item #5, hexagon, stainless steel). These nuts are tightened to 19 lb ft.
Position the O-MEGA step on the mounting brackets so that the square head screws (Item #4) are located in the slots of the mounting brackets and the step is centered front to rear on the vehicle before tightening the serrated flange nuts to 19 lb ft.
The end caps (Item #3) are plastic caps measuring 2.95 x 6.70 inches that are installed on the ends of the step extrusions. Install them as shown in Figure 1 and tighten the nuts to 5 lb ft.
The O-MEGA II is designed for universal application with specific fitment guidance for Chevrolet Silverado/Sierra, GMC Sierra, Chevrolet Express Van, GMC Savana Van, RAM Quad/Crew/Mega Cab, Ford F150, and Ford Super Duty models. Consult the Step Pad Location Guide on Sheet 2 for your specific vehicle model. A vehicle-specific bracket package must be purchased separately.
The manual does not specify required tools. You will need a drill with a 1/8" bit for step pad installation and tools to tighten fasteners to the specified torque values (5 lb ft for end caps, 19 lb ft for mounting bracket bolts). Consult the separate bracket package instructions for additional tool requirements.
End cap nuts: 5 lb ft. Mounting bracket bolts (5/16" serrated flange nuts): 19 lb ft.
Verify all parts from the Service Parts List are on hand. Obtain the vehicle-specific bracket package for your vehicle, which includes separate mounting instructions. Follow the bracket instructions before attaching the O-MEGA steps.
On Sale Today
Original price was $584.95. Current price is $514.95.You save $70.00 (12%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Mon, Aug 24 - Thu, Aug 27
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
No reviews have been added for this product.
