Our in-house experts typically reply within one business day.
Draw-tite
Verify Fitment
Select your vehicle to confirm this part fits.
2017 - 2023 Tesla Grand Vitara
Confirmed to Fit
Always the correct part
We know our products
Quality Products
Free Shipping!
Always the correct part
We know our products
Quality Products
Free Shipping!
Select your vehicle to find the exact plug-and-play parts that fit — no cutting or splicing.
DRAW-TITE Class 1 trailer hitches are the perfect mix of style and stability for those times when youre working on a home project or heading out on an adventure. This DRAW-TITE Class 1 receiver hitch is rated for up to 2,000 lbs. gross trailer weight (GTW) and up to 200 lbs. tongue weight (TW). No weight distribution kits can be used on this specific trailer hitch. DRAW-TITE hitches are designed to provide top towing performance, with solid-all-welded construction and a black powder coat finish to resist rust and corrosion. The Class 1 trailer hitch has a 1-1/4 inch square receiver tube opening so you can easily attach accessories like a bike rack or cargo carrier, or a utility trailer. Includes all the mounting hardware needed for installation and are backed by a nationwide lifetime limited warranty. DRAW-TITE trailer hitches are tested to exceed V-5 and SAE J684 standards. DRAW-TITE: North Americas Favorite Hitch.
| BRAND: | DRAW-TITE |
| PART NUMBER: | 25005 |
| WARRANTY: | LIMITED LIFETIME WARRANTY |
| WEIGHT: | 26 LBS |
| GROSS TOWING WEIGHT: | 2,000 LBS. |
| GROSS TONGUE WEIGHT: | 200 LBS. |
| RECEIVER SIZE: | 1.25 IN. |
| HITCH CLASS: | I |
| DRILLING REQUIRED: | NO |
| MOUNTING HARDWARE INCLUDED: | YES |
| ATTACHMENT LOCATION: | REAR |
| HITCH VISIBILITY: | CONCEALED |
| CROSS-TUBE TYPE: | SQUARE TUBE |
| BALL MOUNT INCLUDED: | NO |
| COLOR: | BLACK |
| FINISH: | BLACK POWDER COAT OVER E-COAT |
| MATERIAL: | STEEL |
| MOUNTING LOCATION: | VEHICLE FRAME |
| MOUNTING TYPE: | BOLT-ON |
Draw-Tite has designed custom-fit trailer hitches since 1946 and is one of North America's most widely fitted hitch brands. Receiver hitches use solid all-welded construction and low-profile designs that follow modern vehicle contours, install with minimal bumper cutting or drilling, meet or exceed V5 CSA and SAE J684 standards, and carry a limited lifetime warranty.
Draw-Tite has been leading custom-fit trailer hitch design and engineering since its founding in 1946, and it remains one of the most widely fitted hitch brands in North America. The company's stated approach is straightforward: every hitch is tested rigorously so that it performs well beyond published industry standards, a philosophy it markets as Tested Tough. It sits within the Horizon Global towing group alongside Reese, Fulton, Bulldog, Tekonsha, Bargman and Wesbar.
Custom fit is the defining characteristic. Rather than adapting a universal design, Draw-Tite engineers a trailer hitch for a specific make, model and model year, so it bolts to existing frame locations with minimal bumper cutting or drilling. Low-profile designs follow the rear contours and aerodynamic styling of modern vehicles, which matters more than it once did now that rear fascias are shaped and sensor-equipped. Construction is solid all-welded steel for maximum strength, and every hitch meets or exceeds V5 CSA and SAE J684 standards and is backed by a nationwide limited lifetime warranty.
The range spans receiver sizes and classes to suit different loads, from 1-1/4 inch receivers for bike racks, cargo carriers and light trailers up through 2 inch receivers for heavier towing. Front mount hitches add a receiver at the front of the vehicle for winch mounts, snow plows, spare carriers and precise trailer positioning.
The Hidden Hitch series takes concealment further by mounting behind the vehicle's rear fascia, so the vehicle keeps its factory appearance until a removable receiver is fitted. Each is custom designed per make and model for a no-drill installation that does not compromise ground clearance, rated for up to 3,500 pounds gross trailer weight and 350 pounds tongue weight. Matching plug-and-play wiring completes the towing system.
Experts available to answer your questions
Call 888-634-9494Lifetime
1 compatible vehicles
| Year | Make & Model | Notes |
|---|---|---|
| 2017 - 2023 | Tesla Grand Vitara | Class 1 Trailer Hitch: 2000 lbs 200/2,000 lbs. Weight Carrying (tongue weight/gross trailer weight) Uses all existing holes. No Drilling required Install Time is 120 minutes |
Yes, the Draw-tite Class 1 Trailer Hitch, 1-1/4" Square Receiver, Black for Select Tesla 3 25005 (Part #DT25005) is designed to fit the 2017-2023 Tesla Grand Vitara.
The Draw-tite Class 1 Trailer Hitch, 1-1/4" Square Receiver, Black for Select Tesla 3 25005 (Part #DT25005) fits the following vehicles: 2017-2023 Tesla Grand Vitara. Always verify your specific year, make, and model before ordering.
The Draw-tite Class 1 Trailer Hitch, 1-1/4" Square Receiver, Black for Select Tesla 3 25005 (Part #DT25005) fits 2017-2023 Tesla Grand Vitara models. The 2023 model year is the last year covered by this part number. For newer models, check for an updated version.
The Draw-tite Class 1 Trailer Hitch, 1-1/4" Square Receiver, Black for Select Tesla 3 25005 (Part #DT25005) Refer to the included instructions for installation details. Basic hand tools are typically all you need.
Yes. Part numbers 25005, 78298, and CQT25005 are designed for 2017-Current Tesla Model 3. Visit the manufacturer's website for the most up-to-date information regarding specific application years and trim levels.
The maximum gross trailer weight is 2000 lb. (907 kg) and the maximum tongue weight is 200 lb. (91 kg). However, you must not exceed the lower of your Tesla Model 3 manufacturer's towing rating or these limits.
Required tools: ratchet, torque wrench, safety glasses, sockets (8mm, 10mm, 15mm), 6-inch socket extension, plastic trim tools, flat head screwdriver, and T25 star driver.
Yes. The average installation time is 120 minutes for professional installers. If you do not feel comfortable performing this installation on your own or are in need of assistance, contact a professional installer.
Yes. Installation requires removal of the rear bumper fascia, taillights, wheel well liner, impact bar, and sensor to access the hitch mounting points. All removed components are reinstalled after the hitch is mounted.
The factory impact bar is removed using a 15mm socket to access the hitch mounting points. The impact bar nuts are saved and reused for hitch installation. The impact bar is then returned to the owner.
Yes. Both driver and passenger side taillights must be removed to access the trunk side panels and gain access to the hitch mounting area. Taillights are unplugged from their wiring harnesses and secured with 8mm nuts, then reinstalled after hitch installation.
The sensor on top of the impact bar is partially removed by taking out 5 screws with a 10mm socket. This allows the sensor to hang down and provides access to the impact bar base plates for hitch installation. The sensor screws are saved and the sensor is reinstalled after the hitch is mounted.
Yes. The wheel well liner on both driver and passenger sides must be loosened by removing 3 plastic rivets and 1 Torx screw inside the rear wheel fender on each side. This provides access to the rear fascia for removal.
The hitch is secured using 6 factory 10mm nuts. These nuts come from the factory impact bar mounting points and are reused to attach the hitch receiver.
All 10mm fasteners must be tightened to 38 Lb.-Ft. (52 N·M) using a torque wrench. Proper torque is required to keep the hitch secure to the vehicle when towing.
The manual instructs to loosely tighten the factory nuts to the hitch first (Step 8), then tighten all 10mm fasteners with a torque wrench to 38 Lb.-Ft. (52 N·M) in Step 9. This two-stage process ensures proper alignment and final torque specification.
The rear underbody appearance panel is secured with 7 screws. On some models, an 8th screw is present. All screws must be removed to partially loosen the panel and gain access to the hitch mounting area.
The trim area is 1.50 inches (measured from centerline). This dimension is shown in Figure 2 and relates to the bottom panel removal area.
Yes. A bottom panel door must be removed using a flathead screwdriver to remove 2 screws, which provides access to the hitch mounting area. If your vehicle's rear fascia does not come with a bottom panel door as shown in Figure 2, consider obtaining one from the dealership.
Two (2) plastic covers must be dislodged from the bottom of the fascia and appearance panel using a flathead screwdriver before removing the 7 appearance panel screws.
Use plastic trim tools to remove the fascia starting at the outer edges near the wheel wells and gently pull the fascia away from the vehicle. Carefully set the fascia aside for reinstallation. Disconnect any wiring harness if present.
Two (2) plastic trunk stops on top of the taillights must be removed by turning them counterclockwise by hand. These are located inside the trunk above the taillights.
Each taillight is secured with 2 nuts using an 8mm socket. After removing the taillights, an additional 1 screw is removed using a 10mm socket. Both driver and passenger side taillights must be removed.
Five (5) screws secure the sensor to the top of the impact bar. These are removed using a 10mm socket and saved for later reinstallation.
The impact bar is secured with either 6 or 8 nuts depending on your vehicle model. These nuts are removed using a 15mm socket and saved for hitch installation.
Safety glasses must always be worn when installing the hitch. The manual also recommends observing safety precautions when working beneath a vehicle and wearing eye protection. Do not use a torch to cut access or attachment holes.
If excess sway occurs, take your foot off the gas pedal and hold the steering wheel as steady as possible. Do NOT apply your brakes and do NOT speed up.
No. Do NOT cut, weld, or modify this receiver. Modifications will compromise the structural integrity and safety of the hitch.
Load the trailer heavier in front. This helps maintain proper weight distribution and improves towing stability.
Slow down when towing and never exceed any posted speed limit. Always wear your seatbelt while towing.
Check the hitch frequently, making sure all fasteners and ball are properly tightened. The manual emphasizes periodic inspection to ensure the hitch remains securely mounted to your vehicle.
If the hitch is removed, plug all holes in the trunk pan or other body panels to prevent entry of water and exhaust fumes. This protects the vehicle's interior from damage.
A hitch or ball which has been damaged should be removed and replaced. Do not attempt to repair a damaged hitch receiver.
No. The authorized drawbar kit (part number 3593) is sold separately. When using the drawbar, it must be used in the RISE position only.
The 25005 hitch includes a Limited Lifetime Warranty covering material defects in materials and workmanship, excluding ordinary wear and tear. The warranty is valid only if products are installed, maintained, and used in accordance with manufacturer instructions. To make a warranty claim, contact Horizon Global at 47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, or TechnicalSupport@horizonglobal.com.
Contact Horizon Global at: Website: www.horizonglobal.com, Phone: 800-632-3290, Email: TechnicalSupport@horizonglobal.com.
On Sale Today
Original price was $528.75. Current price is $343.54.You save $185.21 (35%)
Free Shipping
Ships free on all orders
Authorized Dealer
Quick Ship
In stock and ready to ship — order now!
FREE ShippingFREE SHIPPING
Estimated delivery Sat, Aug 15 - Tue, Aug 18
Order before 2 PM EST Monday–Friday for same-day processing
Guaranteed safe & secure checkout
| Bulk # | Pkg # | Lift Capacity | Wind | Travel | Hole Size | Handle Type | Style | Retracted Ht. | Extended Ht. |
|---|---|---|---|---|---|---|---|---|---|
| 28320 | -- | 2,000 lbs. | Top | 10" | 10-3/4" | Claw | Pipe-mount | 11" | 21-3/4" |
| 25006 | -- | 5,000 lbs. | Top | 10" | 9/16" | Claw | Pipe-mount | 11-1/4" | 21-1/4" |
| 28356 | -- | 5,000 lbs. | Top | 15" | 5/8" | Claw | Pipe-mount | 15-1/2" | 31-1/2" |
| 28322 | 28323 | 5,000 lbs. | Side | 10" | 9/16" | Claw | Pipe-mount | 16" | 31" |
| 28321 | -- | 2,000 lbs. | Side | 10" | 9/16" | Straight | Pipe-mount | 17-1/2" | 28-1/2" |
| 28324 | -- | 5,000 lbs. | Side | 10" | 5/8" | Straight | Pipe-mount | 10-1/4" | 20-1/4" |
| 25005 | -- | 3,000 lbs. | Side | 15" | 5/8" | Straight | Pipe-mount | 15-1/2" | 30-1/2" |
| 28312 | -- | 5,000 lbs. | Side | 15" | 3/4" | Straight | Pipe-mount | 15-1/2" | 30-1/2" |
| 28300 | 28301 | 2,000 lbs. | Top | 10-1/2" | -- | Claw | Bracket-mount | 11-1/2" | 21-1/2" |
| 28302 | -- | 2,000 lbs. | Side | 10" | -- | Straight | Bracket-mount | 11" | 18-1/2" |
| 28304 | -- | 2,000 lbs. | Top | 15-1/4" | -- | Claw | Bracket-mount | 16" | 31-1/4" |
| 28306 | -- | 2,000 lbs. | Side | 14-1/2" | -- | Straight | Bracket-mount | 15-1/2" | 30" |
Total for 5 items:
$492.11$677.32
Jennifer
The staff was able to quickly assist me with locating the correct product I needed. Shipping was really fast. Item arrived in 2 days. Will be using TowUniverse again!!
May 22, 2023
